Modification Re-organization of Existing Office Accommodation at NHIDCL Headquarters, 1st and 2nd Floor, Tower A, World Trade Centre, Nauroji Nagar, New Delhi Procurement of Furniture phase 2

S No Item Item Description Qty Unit Rate Amount

Supplying & Placing of First & Second Floor Director Cabin Main table with made of Sheesham Wood &

1 Sattva model With modiesty panel The Size of Table is 270x105x76 in Cm as per approved Design & Color Nos 1 137949.00 137949.00

Scheme by Client .

Supplying & Placing of Director Cabin Storage back unit The Size of Storage 400x45x75 in Cm The model

2 , 3 part Which are made of Sheesham /Glass & the model is Sattva as per approved Design & Color Scheme Nos 2 320043.00 640086.00

Director Supplying & Placing of Drawer under table storage Which Are made of Sheesham Wood & Sattva model

3 The Size of Storage is 45x45x50 in Cm as per approved Design & Color Scheme by Client . Nos 2 27589.00 55178.00

Director Side Supplying & Placing First & Second Floor Director Cabin of Side Unit Whicjh Are made of Sheesham Wood

4 & Sattva Model - Large The Size of Side unit is 150x60x60 in Cm as per approved Design & Color Scheme Nos 2 110359.00 220718.00

Providing and placing in position High back chair.The seat shall be made up of 1.2 +/- 0.1 cm thick hot

pressed moulded reconstituted wood & upholstered with leather and moulded polyurethane foam. Size of

back shall be (W)-46.0cm, (H)-57.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR)

foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and

hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The back rest should be connected to the

mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-0.5cm for the comfortable

back support to suitable individual need. Armrests should be pressure die casted in polished aluminium with

PP arm tops. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt

ratio of 1:3, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be

Director High operated while taking back support for better adjustment of comfort. The chair shall be provided with

back chair pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-

cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of head rest shall be

(W)26.0cm x 12.0cm(L). The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm

with castors). The twin wheel castors shall be injection moulded in black polypropylene. Overall dimensions

of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below.

Height from ground - min 113.5 to max 138.0 cms. Seat height - min 41.0cm to max 51.0 cm. Dimensions

tolerance / variations shall be within +/- 1 cm. Complete all as per the direction of Engineer in Charge.

Digitally signed by MANISH

Providing and placing in position revolving visitor.The seat shall be made up of 1.2 +/- 0.1 cm thick hot

pressed moulded reconstituted wood & upholstered with leather and moulded polyurethane foam. The back

shall be designed with contoured lumber support for extra comfort. Size of back shall be (W)-45.0cm, (H)-

49.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam should be used in

making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per

IS: 7888 for 25% compression. The back rest should be connected to the mechanism with a drop-lift

mechanism which can be adjusted in the range of 7.0+/-0.5cm for the comfortable back support to suitable

Director individual need. Armrests should be pressure die casted in polished aluminium with PP arm tops. The

Revolving mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3,

6 visitor & Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated Nos 6 52455.95 314735.70

Discussion while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height

Chair adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished

aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm

pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black

polypropylene. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as

measured from pedestal below. Height from ground - min 93.5 to max 110.5 cm. Seat height - min 41.0cm to

max 51.0 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Complete all as per the direction of

Engineer in Charge.

Director 3 Providing and Placing in position of Three seater long sofa as per approved by clind Sheesham made king

Seater Sofa size 3 seater Sofa 184x70x93 as per approved uphosty by cllient.

Director 1 Providing and Placing in position of Single seater long sofa has been designed with Different Shade &

Seater Sofa Sheesham Family & Different Size Single Seater Sofa 91x70x93 approved By Client.

Director Providing and placing Coffee Table Sheesham Wood Make as per appropriate Size 120x75x46 in cm as

Cofee Table per approved by Client

Director End Providing and placing End Table Sheesham Wood Make as per appropriate Size 45X45X45 in cm as per

Table approved by Client

11 Supplying & Placing PS Cabin of Director of Made of Sheesham Wood & Model Classic Bhram W Quadro Nos 2 59593.00 119186.00

The Size of Visiter table 165x60x76 in Cm. as per approved Design & Color Scheme by Client .

Director PS Supplying & Placing PS Cabin Of Director of Made of Sheesham Wood & Model Classic Bhram W Quadro

12 Under Pattern The Size of Drawer Under Table Storage 45x45x50 in Cm. as per approved Design & Color Scheme Nos 2 24278.00 48556.00

Storage by Client .

Supplying & Placing PS Cabin Of Director of Made of Sheesham Wood & Model Classic Bhram W Quadro

Pattern The Size of Side Unit 120x60x60 in Cm. as per approved Design & Color Scheme by Client .

Digitally signed by MANISH

Providing and placing in position high back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed

plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high

tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2

kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have

Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front

Director PS fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

14 High back lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. Nos 2 12083.75 24167.51

chair The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. This shall come along a

headrest from same family. It shall be SCS IAQ certified for Indoor Air Quality.Complete all as per the

direction of Engineer in Charge.

Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed

plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high

tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2

kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have

Director PS Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front

15 Medium back fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The Nos 4 11055.58 44222.30

chair lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric.

The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. It shall be SCS IAQ certified

for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

Digitally signed by MANISH

Providing and placing in position of Linear Workstation and ht - 1050 including powder coated aluminium

trims. Tiles: The tiles on the top most frame shall be glass writing board/ clear glass tile. Bottom tiles -

Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm

Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both

sides. The uprights and horizontals shall be made of aluminium extrusion having average wall thickness of

1.2 mm & powder coated with epoxy- polyester powder. Particle board framing is used on outer boundary

of these blocks as well as intermediately at certain locations forming conduit for passing cables.

These blocks are located in the mid segment of the panels and can be provided with cutouts for mounting

switch boxes (above or below the worktops). Top tiles can be offered in variety of combinations. The fins Nos 18.00 74500.00 1341000.00

along the depth shall be 22.8mm thick. Worksurface- out of 25 mm thk prelam particle board with flat pvc

lipping edge banding of size 1200mm W1 x 600D x 750H. Brackets shall be made from 2mm thick CRCA

steel. Pedestals with legs - Nova pedestal flat metal front, free standing central locking of size 390 mm w

x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried out as per the instructions

and guidance received from engineer incharge. The product must be UL Greenguard, BIFMA Level 3

certified.Complete all as per the direction of Engineer in Charge.

DGM table Supplying & Placing First & Second Floor made of Sheesham Wood & Model Bhram Classic of Visiter table Nos 13 99323.00 1291199.00

The Size of Table 225x105x76 in Cm as per approved Design & Color Scheme by Client .

Supplying & Placing First & Second Floor made of Sheesham Wood & Model Bhram Classic of Side Unit Nos 13 82769.00 1075997.00

The Size of Side Unit 120x60x60 in Cm as per approved Design & Color Scheme by Client .

Supplying & Placing First & Second Floor made of Sheesham Wood & Model Bhram Classic of Drawer

DGM Drawer Under Table Storage The Size of Side Unit 45x45x50 in Cm as per approved Design & Color Scheme by Nos 13 24278.00 315614.00

Providing and placing in position high back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed

plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high

tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2

kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have

Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front

DGM High fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

back Chair lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric.

The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. This shall come along a

headrest from same family. It shall be SCS IAQ certified for Indoor Air Quality.Complete all as per the

direction of Engineer in Charge.

Digitally signed by MANISH

Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed

plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high

tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2

kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have

Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front

DGM Visitor fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

chair lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric.

The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. It shall be SCS IAQ certified

for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

Providing and placing in position mid back chair.The seat is made up of 1.2± 0.1cm thk. Hot pressed

plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high

tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2

kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have

Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front

fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The Nos 18 11055.58 199000.37

lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric.

The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad.

Lumber pad has an adjustment of 8.0± 0.5 cm in height. The must be greenguard certified. the work shall be

carried out as per guidance and instructions recieved from Engineer Incharge. It shall be SCS IAQ certified

for Indoor Air Quality.Complete all as per the direction of Engineer in Charge.

Total Amount 70,84,276.00

Total Amount 70,84,276.00

Digitally signed by MANISH