Rewinding of 30HP, 1440rpm, 3 phase induction motor at Lift Irrigation scheme Ramdayal and electrical works to 50 HP, three phase induction motor of LI/DWS Gunde Ibrahim.

Amount

Rewinding of 30HP, three phase induction motor at LIS Ramdayal:- Disconnecting of all motor leads, dismantling of motor, draining off the m.oil (if applicable) and collection in suitable pan, taking out the rotor from the stator, and complete disassembly as per requirement of job:

Mechanical transportation, loading, unloading and handling of 30 HP motor from site to workshop and vice versa using load carrier auto

Complete rewinding of stator coils of 3-phase LV horizontal/ vertical induction motor with suitable copper wire after complete removal of burnt out winding, cleaning of slots, etc., insulation class F, varnishing, tapping, etc.

The unserviceable scrap copper windings extracted shall be property of the firm and is taken into account for estimation of rates ( The amount quoted against the item has to be equal to or over 589 rupees)

Assembling of all motor parts, refilling of drained out m.oil (if applicable), coupling and alignment with pump, reconnecting of leads and testing on full load.

Electrical works to 50 HP, three phase induction motor of LI/DWS Gunde Ibrahim:- Disconnecting of all motor leads, dismantling of motor, draining off the m.oil (if applicable) and collection in suitable pan, taking out the rotor from the stator, and complete disassembly as per requirement of job:

Varnishing, impregnation and drying of stator windings of LT motors with standard quality varnish (Becks or any other reputed make) as specified below along with proper tapings, etc. as per requirement. (excluding dismantling/ refitting charges) of motors

Providing and fitting of ball bearing no. 6313. The Job includes extraction of old damaged bearings by using bearing puller. The Job further includes greasing to the newly fitted bearings Make : ZKL/ARB/NBC

Assembling of all motor parts, refilling of drained out m.oil (if applicable), coupling and alignment with pump, reconnecting of leads and testing on full load.

ishaq electricals