AS AND AS OF BOUNDARY WALL AND ACCESS GATE OF KAKATIYA AT NAVAL DOCKYARD VISAKHAPATNAM

Amount

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work for concrete surface and finished even smooth without using extra cement complete all as specified and directed.

M&L for preparation of plastered or un plastered surfaces and applying 2 coats of cement wash with Portland cement slurry to smooth bodied opaque finish all as specified and directed.

Excavation in trenches not exceeding 1.5 M deep for foundation etc., and getting out in soft/loose soil complete all as specified and directed.

Demolition of RCC of roofs,floors (other than ground floor) , beams ,staircase landing chajjas and similar suspended work of any description and any position including cutting of steel reinforcement to facilitate demolition and removing the debris from dockyard permises all as specified and directed

M&L PCC 1 : 4 : 8 type D2 using 40 mm graded stone aggregate, in foundations, filling and mass concrete all as specified and directed.

M&L formwork to sides of concrete in foundation , footings, bases of columns ,raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, flat ,vertical or to batter in rough finished surfaces of concrete, all as specified and directed

Material and labour for RCC (1:2:4) type B1( using 20 mm graded aggregate) in foundation including rafts ,footing , foundation beams , plinth beams, bases for columns etc, pile and mass, complete all as specified.

Material and labour for RCC (1:2:4) type B1( using 20 mm graded aggregate) for columns pillars ,slab, piers,post and struds complete all as specified.

M&L for Mild steel deformed or twisted bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips

M&L for Mild steel deformed or twisted bars 6mm to 8mm ida cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, or securing with clips complete all as specified and directed.

Returning and filling in hard dense soil,including, spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removal of excavated soil exc 1.50 Km but n.exc 5 Km and depositing where directed.

S & F framed work as in door and gate of angle or other section with gusset plates rail braces etc, complete drilled for fixing of steel sheeting or other covering . Doors, etc.to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, fastening and fixing complete of Fe-410W(Gde-250)quality B,complete all as specified and directed.including

Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified and directed.

S&F rolled mild steel in plain or chequered square cut or notched (ordinary and counter shunk) forming holes without any attachment ,complete all as specified.confirming toFe-290 ( Gde E-165 ) complete all as specified and directed.

Demolition of cement concrete of any description in any position not other wise specifically provided for all as specified and directed.

M&L for20mm thick black granite work (table rubbed and polished) in steps,jambs,pillars ,window cills cooking plate forms and like with 15 mm thick cement mortar (1:4) bedding including point in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

A BALA RAJU

VINAYAK BUILDTECHS

VENKATESWARA ENGINEERING WORKS

SAI SREENIVASA ENGINEERING

V JANAKI RAMA RAJU

SATYAMEGHA ENGINEERS