Tender For CONSTRUCTION OF COW HOUSE 2ND FLOOR TEEAN SHED, RESIDENCY and REMAIN WORK JHARIPANI ROAD NEAR PRIMARY SCHOOL AT NAGAR PALIKA MUSSOORIE

2.6 Earth work in excavation by mechanical means (Hydraulic Excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m width as well as 10 sqm on plan) including getting out and disposal of excavated eath lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge 2.6.1 all kinds of soil.

4.1 Providing and laying in position cement concrete of specified grade excluding th cost of centering and shuttering all work uo to plinth level :4.1.8 1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40mm nominal size)

5.15 Providing, hoisting and fixing above plinth level uo to floor five level precastreinforced cement concrete in lintels, beams and bressumers, including setting in cement motar 1:3 (1 cement : 3 coarse sand), cost of requiredcentering and shuttering but, excluding the cost of reinforcement, with 1:1:2 (1 cement :1.5 coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size)

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes (weepholes)

5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.6 Thermo Mechanically Treated bars of grade Fe - 500 D or more.

6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix in 1:6 (1 cement : 6 fine sand) (13.1.2) DSR-

10.25 Steel work welding in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 in gratings, frames, guard bar, ladder, railings, brackets, gatesand similar work

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) .9.1.2 Sal wood

9.20 Providing and fixing ISI marked flus door shutters conforming to IS : 2202 (part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vetical grains or cross bands and face veneers on both faces of shutters 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing 1st qualiity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades excepts burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete DSR

12.1 Providing corrugated G.S. sheet rolling including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of steels complete (up to any pitch in horizontal/vertical or curved surface). excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.1 1.00 mm thick with zinc coating not less than 275 gm/m2

9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 9.1.2 Sai wood

12.31 Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceilling up ta a height of 5 m above floor level, over first class kali wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) : 12.31.1 Flat surface

13.80 Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plkastered wall surface to prepare the surface even and smooth complete

13.61 Painting with synthetic enemel paint of approved brand and manufacture to give an even shade: 13.61.1 Two or more coats on new work

13.48 Finishing with Deluse Muili surface paint system for interiors and exteriors using Primer as per manufacturers specifications :13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

4.11 Providing and laying c.c floor 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

SANITARY FITTINGS 17.2 Providing and fixing white vitreous china pedestal type water closet (european type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floor wherever required: 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

17.7 Providing and flxing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : 17.7.2 White Vitreous China Wash Basin Size 630 X 450 mm with a single 15 mm C.P. brass pillar tap

Providing & Fixing of 15mm G.I. class 'B' Pipe (Jindal hissar Make) complete with G.I. fittings & cramps including supply of all materials, labour and T&P etc. and including making good the wall etc. (internal work) as per D.S.R. code no. 18.12.1 15 mm dia nominal bore

18.12.2 20mm dia nominal bore

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and amking necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank.

18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :18.18.2 20 mm nominal bore

18.16 Providing and fixing brass stop cock of approved quality 18.16.2 20 mm nominal bore

18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.2 45 cm length 18.21.2.1 15 mm nominal bore

18.49 Providing and fixing C.P. brass bib cock of approved quality confrming to IS : 8931 : 18.49.1 15 mm nominal bore

18.53 providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS : 893118.53.1 15 mm nominal bore

17.31 Providing and fixing 600X450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

8.1 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately 8.1.1 Raj Nagar Plain White Marble/Udaipur Green Marble/Zebra Black Marble. 8.1.1.1 Area of slab upto 0.50 sqm

ITEM DRAINAGE 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.1 75 mm diameter

12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter

ITEM ELECTRICAL FITTINGS Wiring point for light with 1.50 sq. mm PVC insulated single core cable in HD PVC condute pipe on surface complete with 1.50 sq. mm PVC insulated Aluminium conductor cable as earth continuity wire drawn inside the conduit complete in all respect. (M.R) Light Rate

Tube Light / Led Light

Fan with Box. Rate / Exest Fan

Plug Point Box Rate

MCB Box Rate

radhey shyam sharma

C S RAWAT