DRAFT TENDER PAPERS FOR OLD EXISTING TOILET UPGRADATION AT VARIOUS AREA FOR VALSAD MUNICIPALITY, VALSAD

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

1 Opp. Ramesh Deni House

2 Opp. Ramwadi Lotus

3 Near Kashmir Nagar River

4 Beside Dream Land Theatre

5 Doctor House Opp. Old Custom Office

7 Behind Gayatri Temple

8 Suthar Chawl Mission Colony

9 Near Et Bhatha

Note:- All taxes included except 18% G.S.T.

I / We am/are willing to carry out the work at _____________ % above / below ( percent should be written in figure and in words) of the

estimated rates mentioned above. Amount of my/our tender works out as under.

( In words ) _________________________ percentage above / below the estimated rate.

Estimated Amount put to tender Rs.

Deduct _______ % below Rs.

Estimated Amount put to tender Rs.

Add _______ % above Rs.

Total Amount Rs.

Total Amount Rs.

*( Please strike out whichever is not applicable)

All work shall be carried out as per Public Works Department Hand Book and other specifications of Division or as directed.

Rates quoted include clearance of site ( prior commencement of work and its close) in all respects and hold good for work under all

conditions, site, moisture. Weather etc.

I/ We have read the conditions mentioned in this tender and agree to abide by the same.

Signature of Contractor. Chief Officer

Valsad Municipality

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 01 : OPPOSITE RAMESH DENI HOUSE

ITEM DESCRIPTION QTY. RATE UNIT

1 Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C 166.00 19.57 Sqm

member including stacking of serviceable material and disposal of unserviceable from

site of work with all lead and lift.

2 Demolition of terrace including stacking of serviceable materials and disposal of 8.00 63.80 Sqm

unserviceable materials with all lead and lift.

(i) Brick tile flooring

3 Dismentling of tiled of stone floors laid in mortar including stacking of serviceable 10.00 48.21 Sqm

materials and disposal of unserviceable material with all lead and lift

4 Providing 15 mm. thick mala cement plaster in single coat on fair side of Brick/concrete 43.00 134.43 Sqm

Walls for interior plastering upto floor two level and finished even and smooth in

Cement mortar 1:4 [1 cement: 4 sand) including necessary curing, scaffolding, in true

line and level etc. complete as directed by Engineer in Charge.

5 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of 6.00 140.95 Sqm

Ceiling surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished even

and smooth in C.M. 1:4 (1 cement : 4 Sand ) including necessary curing, scaffolding, in

true line and level etc. complete as directed by Engineer in Charge.

6 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m height 134.00 300.66 Sqm

from ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand )

and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including curing, necessary

scaffolding in true line & level etc. comp. as directed by Engineer in charge

7 Wall painting ( Three Coats ) with plastic emulsion paint of approved brand and 39.00 120.87 Sqm

manufacture on wall surfaces to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and sand paper smooth.

8 Painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture 6.00 128.51 Sqm

and of required shade on ceilings and sloping roofs surface to give an even shade

including throughly brushing the surface free from mortar dropping and other foreign

matter and also including preparing the surface even and sand papered smooth.

9 Finishing wall with painting of weather proof exterior acrylic emulsion paint on wall 104.00 114.53 Sqm

surface ( three coats) to give an required shape even shade including a priming coat

with alkali resistance primer of approved brand after thoroughly brushing the all

materials.etc complete as directed by Engineer in Charge with

10 Providing and laying China Mosaic Type Water Proofing treatment on terrace including 8.00 747.29 Sqm

(a) applying neat cement slurry 2.75 kg./ sqm of cement admixed with water proofing

compound after cleaning the surface . (b) laying cement concrete using brick bats 25 to

100mm size with 50 % of C.M. 1:5 ( 1 cement : 5 coarse sand ) admixed with water

proofing compound over 20mm thick layer of c.m. 1:5 to required slope including

rounding of junction of walls and slabs. (c) After two days of proper curing , applying a

second coat of cement slurry. (d) Finishing the surface with 20mm thick C.M. 1:4 and

China mosaic tilling & finally finishing the surface with trowel with white cement slurry.

(e) after finishing the whole terrace shall be flooded with water for a period of two

ITEM DESCRIPTION QTY. RATE UNIT

11 P & L Vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement 113.00 1397.83 Sqm

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the surface etc. complete,

size & shade approved by Engineer in charge. For Antiskid

12 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. 77.00 104.04 Kg

with M.S. flats at required spacings and frame alround, square or round bars with round

headed bolts and nuts or by screws.

(A) Plain Grill.

13 Providing & fixing 35mm thick Fiber flush shutter with 1.5 to 2.0mm thick fire retardent 6.00 1269.63 Sqm

gradde FRP skin in depressed panel design having extra reinforcement of sider & edges

& in gel coat finish. The core of the shutter is to be filled up with injected retardent

grade polyurethane foam done in situ alongwith embedded wooden pieces for stiffening

& also taking hinges & fixtures. The whole FRP frame & shutter is to be waterproof,

weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive

of S. S hinges with necessary screws & alluminium fixtures & fastenings.

14 Providing and fixing standared extruded of alluminium section of size 63mm x 2.00 1175.56 Sqm

38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc. complete for Ventilation

15 Dismantling Santtary fittings like wash basin, W.C. pan Indian and European type, 4.00 405.65 No.

flushing tank etc. including stacking the materials with all lead and lift

16 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 2.00 1371.38 No.

580mm of superior colours including "P or S" trap, earthwork, bed concrete, foot rest

etc. complete as directed by EIC.

17 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P 2.00 1734.95 No.

or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

Fine sand), complete as directed by EIC.

18 Providing and fixing Flat back long pattern Urinal "Cera, Hindware,Jaquar or equivalent 2.00 1036.27 No.

make" of approved quality including urinal flush vave 15mm size control cock with

300mm long connecting CP pipe and nuts and PVC waste coupline and concealed

waste pipe etc comp.

(A) Earthenware 430 x 260 x 350 mm

( It. Code. 23033, Pg. No. 180 )

19 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib 6.00 186.83 No.

tap polished bright.

20 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, 2.00 308.73 No.

shanks and back nuts.

21 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets 2.00 1506.45 Sqm

painted white including sutting holes and making good the same but excluding fittings.

(A) Vitreous China (ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

22 Providing & fixing 600 mm X 450 mm Bevelled edge Mirror of superior glass mounted 2.00 833.73 Sqm

on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass

screws and washers, including fixing C.P. brass bracket support and guard rial fixed to

woode plugs with C.P. brass screws etc. complete as directed by engineer Incharge.

23 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of 1000.00 3.95 Litre

required capacity each with al necessary fitting & connection etc Comp. on terrace.sor

ITEM DESCRIPTION QTY. RATE UNIT

24 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B 8.00 836.73 Rmt

pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall

be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x

mm high at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pies and joints

and jointed with adhesive solvent cement including cost of all materials.

25 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) 20.00 91.84 Rmt

line including fitting of PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as

approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of clamp

at every two meter C/C or shall be concealed as directed including testing of pipe and

joints and fixing the same with adhesive solvent ,including cost of all material.

Add 10% Electrical Works

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 02 : OPP. RAMWADI LOTUS

ITEM DESCRIPTION QTY. RATE UNIT

1 Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member 123.00 19.57 Sqm

including stacking of serviceable material and disposal of unserviceable from site of work

with all lead and lift.

2 Demolition of terrace including stacking of serviceable materials and disposal of 10.00 63.80 Sqm

unserviceable materials with all lead and lift.

(i) Brick tile flooring

3 Dismentling of tiled of stone floors laid in mortar including stacking of serviceable materials 12.00 48.21 Sqm

and disposal of unserviceable material with all lead and lift

4 Providing 15 mm. thick mala cement plaster in single coat on fair side of Brick/concrete 43.00 134.43 Sqm

Walls for interior plastering upto floor two level and finished even and smooth in Cement

mortar 1:4 [1 cement: 4 sand) including necessary curing, scaffolding, in true line and level

etc. complete as directed by Engineer in Charge.

5 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of Ceiling 6.00 140.95 Sqm

surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished even and smooth in

C.M. 1:4 (1 cement : 4 Sand ) including necessary curing, scaffolding, in true line and level etc.

complete as directed by Engineer in Charge.

6 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m height from 87.00 300.66 Sqm

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand ) and 8mm

thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including curing, necessary scaffolding in

true line & level etc. comp. as directed by Engineer in charge

7 Wall painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture 39.00 120.87 Sqm

on wall surfaces to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand paper smooth.

8 Painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture and 5.00 128.51 Sqm

of required shade on ceilings and sloping roofs surface to give an even shade including

throughly brushing the surface free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered smooth.

9 Finishing wall with painting of weather proof exterior acrylic emulsion paint on wall surface 61.00 114.53 Sqm

( three coats) to give an required shape even shade including a priming coat with alkali

resistance primer of approved brand after thoroughly brushing the all materials.etc complete

as directed by Engineer in Charge with

10 Providing and laying China Mosaic Type Water Proofing treatment on terrace including (a) 10.00 747.29 Sqm

applying neat cement slurry 2.75 kg./ sqm of cement admixed with water proofing

compound after cleaning the surface . (b) laying cement concrete using brick bats 25 to

100mm size with 50 % of C.M. 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing

compound over 20mm thick layer of c.m. 1:5 to required slope including rounding of

junction of walls and slabs. (c) After two days of proper curing , applying a second coat of

cement slurry. (d) Finishing the surface with 20mm thick C.M. 1:4 and China mosaic tilling &

finally finishing the surface with trowel with white cement slurry. (e) after finishing the

whole terrace shall be flooded with water for a period of two weeks.

11 P & L Vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 134.00 1397.83 Sqm

( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete, size & shade approved by

Engineer in charge. For Antiskid

ITEM DESCRIPTION QTY. RATE UNIT

12 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with 183.00 104.04 Kg

M.S. flats at required spacings and frame alround, square or round bars with round headed

bolts and nuts or by screws.

(A) Plain Grill.

13 Providing & fixing 35mm thick Fiber Glass shutter with 1.5 to 2.0mm thick fire retardent 8.00 1269.63 Sqm

gradde FRP skin in depressed panel design having extra reinforcement of sider & edges & in

gel coat finish. The core of the shutter is to be filled up with injected retardent grade

polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fixtures. The whole FRP frame & shutter is to be waterproof, weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S. S hinges with

necessary screws & alluminium fixtures & fastenings.

14 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 2.00 1175.56 Sqm

1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc. complete for Ventilation

15 Dismantling Santtary fittings like wash basin, W.C. pan Indian and European type, flushing 5.00 405.65 No.

tank etc. including stacking the materials with all lead and lift

16 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 580mm of 3.00 1371.38 No.

superior colours including "P or S" trap, earthwork, bed concrete, foot rest , etc. complete as

directed by EIC.

17 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S 2.00 1734.95 No.

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-Fine sand),

complete as directed by EIC.

18 Providing and fixing Flat back long pattern Urinal "Cera, Hindware,Jaquar or equivalent 2.00 1036.27 No.

make" of approved quality including urinal flush vave 15mm size control cock with 300mm

long connecting CP pipe and nuts and PVC waste coupline and concealed waste pipe etc

(A) Earthenware 430 x 260 x 350 mm

19 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap 6.00 186.83 No.

polished bright.

20 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks 2.00 308.73 No.

21 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets 1.00 1506.45 Sqm

painted white including sutting holes and making good the same but excluding fittings. (A)

Vitreous China (ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

22 Providing & fixing 600 mm X 450 mm Bevelled edge Mirror of superior glass mounted on 6 1.00 833.73 Sqm

mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass screws and

washers, including fixing C.P. brass bracket support and guard rial fixed to woode plugs with

C.P. brass screws etc. complete as directed by engineer Incharge.

23 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of 1000.00 3.95 Litre

required capacity each with al necessary fitting & connection etc Comp. on terrace.sor

24 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B pipe 8.00 836.73 Rmt

conforming to IS 13592-1992 with one end plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm

center to center or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pies and joints and jointed with adhesive solvent

cement including cost of all materials.

ITEM DESCRIPTION QTY. RATE UNIT

25 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) line 25.00 91.84 Rmt

including fitting of PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by

Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of clamp at every two meter

C/C or shall be concealed as directed including testing of pipe and joints and fixing the same

with adhesive solvent ,including cost of all material.

Add 10% Electrical Works

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 03 : NEAR KASHMIR NAGAR

ITEM DESCRIPTION QTY. RATE UNIT

1 Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member 107.00 19.57 Sqm

including stacking of serviceable material and disposal of unserviceable from site of work

with all lead and lift.

2 Demolition of terrace including stacking of serviceable materials and disposal of 11.00 63.80 Sqm

unserviceable materials with all lead and lift.

(i) Brick tile flooring

3 Dismentling of tiled of stone floors laid in mortar including stacking of serviceable materials 10.00 48.21 Sqm

and disposal of unserviceable material with all lead and lift

4 Providing 15 mm. thick mala cement plaster in single coat on fair side of Brick/concrete Walls 37.00 134.43 Sqm

for interior plastering upto floor two level and finished even and smooth in Cement mortar

1:4 [1 cement: 4 sand) including necessary curing, scaffolding, in true line and level etc.

complete as directed by Engineer in Charge.

5 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of Ceiling 5.00 140.95 Sqm

surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished even and smooth in

C.M. 1:4 (1 cement : 4 Sand ) including necessary curing, scaffolding, in true line and level etc.

complete as directed by Engineer in Charge.

6 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m height from 77.00 300.66 Sqm

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand ) and 8mm

thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including curing, necessary scaffolding in

true line & level etc. comp. as directed by Engineer in charge

7 Wall painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture 33.00 120.87 Sqm

on wall surfaces to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand paper smooth.

8 Painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture and 4.00 128.51 Sqm

of required shade on ceilings and sloping roofs surface to give an even shade including

throughly brushing the surface free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered smooth.

9 Finishing wall with painting of weather proof exterior acrylic emulsion paint on wall surface ( 52.00 114.53 Sqm

three coats) to give an required shape even shade including a priming coat with alkali

resistance primer of approved brand after thoroughly brushing the all materials.etc complete

as directed by Engineer in Charge with

10 Providing and laying China Mosaic Type Water Proofing treatment on terrace including (a) 11.00 747.29 Sqm

applying neat cement slurry 2.75 kg./ sqm of cement admixed with water proofing compound

after cleaning the surface . (b) laying cement concrete using brick bats 25 to 100mm size with

50 % of C.M. 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound over

20mm thick layer of c.m. 1:5 to required slope including rounding of junction of walls and

slabs. (c) After two days of proper curing , applying a second coat of cement slurry. (d)

Finishing the surface with 20mm thick C.M. 1:4 and China mosaic tilling & finally finishing the

surface with trowel with white cement slurry. (e) after finishing the whole terrace shall be

flooded with water for a period of two weeks.

11 P & L Vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 96.00 1397.83 Sqm

( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete, size & shade approved by

Engineer in charge. For Antiskid

ITEM DESCRIPTION QTY. RATE UNIT

12 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with 250.00 104.04 Kg

M.S. flats at required spacings and frame alround, square or round bars with round headed

bolts and nuts or by screws.

(A) Plain Grill.

13 Providing & fixing 35mm thick Fiber Glass shutter with 1.5 to 2.0mm thick fire retardent 6.00 1269.63 Sqm

gradde FRP skin in depressed panel design having extra reinforcement of sider & edges & in

gel coat finish. The core of the shutter is to be filled up with injected retardent grade

polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fixtures. The whole FRP frame & shutter is to be waterproof, weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S. S hinges with

necessary screws & alluminium fixtures & fastenings.

14 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 2.00 1175.56 Sqm

1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc. complete for Ventilation

15 Dismantling Santtary fittings like wash basin, W.C. pan Indian and European type, flushing 4.00 405.65 No.

tank etc. including stacking the materials with all lead and lift

16 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 580mm of 2.00 1371.38 No.

superior colours including "P or S" trap, earthwork, bed concrete, foot rest , etc. complete as

directed by EIC.

17 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S 2.00 1734.95 No.

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-Fine sand),

complete as directed by EIC.

18 Providing and fixing Flat back long pattern Urinal "Cera, Hindware,Jaquar or equivalent 2.00 1036.27 No.

make" of approved quality including urinal flush vave 15mm size control cock with 300mm

long connecting CP pipe and nuts and PVC waste coupline and concealed waste pipe etc

(A) Earthenware 430 x 260 x 350 mm

19 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap 6.00 186.83 No.

polished bright.

20 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks 2.00 308.73 No.

21 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets 2.00 1506.45 Sqm

painted white including sutting holes and making good the same but excluding fittings. (A)

Vitreous China (ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

22 Providing & fixing 600 mm X 450 mm Bevelled edge Mirror of superior glass mounted on 6 2.00 833.73 Sqm

mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass screws and

washers, including fixing C.P. brass bracket support and guard rial fixed to woode plugs with

C.P. brass screws etc. complete as directed by engineer Incharge.

23 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of 1000.00 3.95 Litre

required capacity each with al necessary fitting & connection etc Comp. on terrace.sor

24 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B pipe 8.00 836.73 Rmt

conforming to IS 13592-1992 with one end plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm center

to center or shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pies and joints and jointed with adhesive solvent cement

including cost of all materials.

ITEM DESCRIPTION QTY. RATE UNIT

25 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) line 20.00 91.84 Rmt

including fitting of PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by

Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of clamp at every two meter

C/C or shall be concealed as directed including testing of pipe and joints and fixing the same

with adhesive solvent ,including cost of all material.

Add 10% Electrical Works

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 04 : BESIDE DREAM LAND THEATRE

ITEM DESCRIPTION QTY. RATE UNIT

1 Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member 114.00 19.57 Sqm

including stacking of serviceable material and disposal of unserviceable from site of work with

all lead and lift.

2 Demolition of terrace including stacking of serviceable materials and disposal of unserviceable 8.00 63.80 Sqm

materials with all lead and lift.

(i) Brick tile flooring

3 Dismentling of tiled of stone floors laid in mortar including stacking of serviceable materials 10.00 48.21 Sqm

and disposal of unserviceable material with all lead and lift

4 Providing 15 mm. thick mala cement plaster in single coat on fair side of Brick/concrete Walls 39.00 134.43 Sqm

for interior plastering upto floor two level and finished even and smooth in Cement mortar 1:4

[1 cement: 4 sand) including necessary curing, scaffolding, in true line and level etc. complete

as directed by Engineer in Charge.

5 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of Ceiling 6.00 140.95 Sqm

surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished even and smooth in

C.M. 1:4 (1 cement : 4 Sand ) including necessary curing, scaffolding, in true line and level etc.

complete as directed by Engineer in Charge.

6 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m height from 82.00 300.66 Sqm

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand ) and 8mm

thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including curing, necessary scaffolding in

true line & level etc. comp. as directed by Engineer in charge

7 Wall painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture 35.00 120.87 Sqm

on wall surfaces to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand paper smooth.

8 Painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture and of 5.00 128.51 Sqm

required shade on ceilings and sloping roofs surface to give an even shade including throughly

brushing the surface free from mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth.

9 Finishing wall with painting of weather proof exterior acrylic emulsion paint on wall surface ( 53.00 114.53 Sqm

three coats) to give an required shape even shade including a priming coat with alkali

resistance primer of approved brand after thoroughly brushing the all materials.etc complete

as directed by Engineer in Charge with

10 Providing and laying China Mosaic Type Water Proofing treatment on terrace including (a) 8.00 747.29 Sqm

applying neat cement slurry 2.75 kg./ sqm of cement admixed with water proofing compound

after cleaning the surface . (b) laying cement concrete using brick bats 25 to 100mm size with

50 % of C.M. 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound over

20mm thick layer of c.m. 1:5 to required slope including rounding of junction of walls and

slabs. (c) After two days of proper curing , applying a second coat of cement slurry. (d)

Finishing the surface with 20mm thick C.M. 1:4 and China mosaic tilling & finally finishing the

surface with trowel with white cement slurry. (e) after finishing the whole terrace shall be

flooded with water for a period of two weeks.

11 P & L Vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 107.00 1397.83 Sqm

1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete, size & shade approved by

Engineer in charge. For Antiskid

ITEM DESCRIPTION QTY. RATE UNIT

12 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. 164.00 104.04 Kg

flats at required spacings and frame alround, square or round bars with round headed bolts

and nuts or by screws.

(A) Plain Grill.

13 Providing & fixing 35mm thick Fiber Glass shutter with 1.5 to 2.0mm thick fire retardent 6.00 1269.63 Sqm

gradde FRP skin in depressed panel design having extra reinforcement of sider & edges & in gel

coat finish. The core of the shutter is to be filled up with injected retardent grade polyurethane

foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges &

fixtures. The whole FRP frame & shutter is to be waterproof, weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of S. S hinges with necessary screws &

alluminium fixtures & fastenings.

14 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 2.00 1175.56 Sqm

1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc. complete for Ventilation

15 Dismantling Santtary fittings like wash basin, W.C. pan Indian and European type, flushing tank 4.00 405.65 No.

etc. including stacking the materials with all lead and lift

16 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 580mm of 2.00 1371.38 No.

superior colours including "P or S" trap, earthwork, bed concrete, foot rest , etc. complete as

directed by EIC.

17 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S 2.00 1734.95 No.

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-Fine sand),

complete as directed by EIC.

18 Providing and fixing Flat back long pattern Urinal "Cera, Hindware,Jaquar or equivalent make" 2.00 1036.27 No.

of approved quality including urinal flush vave 15mm size control cock with 300mm long

connecting CP pipe and nuts and PVC waste coupline and concealed waste pipe etc comp.

(A) Earthenware 430 x 260 x 350 mm

19 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap 6.00 186.83 No.

polished bright.

20 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks 2.00 308.73 No.

21 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted 1.00 1506.45 Sqm

white including sutting holes and making good the same but excluding fittings. (A) Vitreous

China (ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

22 Providing & fixing 600 mm X 450 mm Bevelled edge Mirror of superior glass mounted on 6 mm 1.00 833.73 Sqm

thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass screws and washers,

including fixing C.P. brass bracket support and guard rial fixed to woode plugs with C.P. brass

screws etc. complete as directed by engineer Incharge.

23 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of required 1000.00 3.95 Litre

capacity each with al necessary fitting & connection etc Comp. on terrace.sor

24 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B pipe 8.00 836.73 Rmt

conforming to IS 13592-1992 with one end plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm center

to center or shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pies and joints and jointed with adhesive solvent cement

including cost of all materials.

ITEM DESCRIPTION QTY. RATE UNIT

25 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) line 20.00 91.84 Rmt

including fitting of PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by

Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of clamp at every two meter

C/C or shall be concealed as directed including testing of pipe and joints and fixing the same

with adhesive solvent ,including cost of all material.

Add 10% Electrical Works

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 05 : DOCTOR HOUSE OPPOSITE OLD CUSTOM OFFICE

ITEM DESCRIPTION QTY. RATE UNIT

1 Excavation for foundation up to 1.5 m depth including sorting out and stacking of 18.00 117.08 Cumt

useful materials and disposing of the excavated stuff up to all lead and lift. (A) Loose

2 Excavation for foundation for depth from 1.5 m to 3.0 m depth including sorting out 11.00 162.56 Cumt

and stacking or useful materials and disposing of the excavated stuff upto to all lead

(B) Dense or Hard Soil

3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of 20.00 130.39 Cumt

foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering.

4 Filling in plinth with sand under floors including watering reamming, consolidating 2.00 460.19 Cumt

and dressing etc. comp.

5 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. 1.00 289.06 Cumt

thickness including watering ramming and consolidating etc. completed.

6 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand 2.00 2,680.21 Cumt

broken stone aggregate 40 mm nominal size) and curing complete excluding cost of

(A) Foundation and Plinth.

7 Providing and laying cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded 1.00 3,683.34 Cumt

stone aggregates 20 m.m. nominal size) and curing complete excluding cost of form

work & reinforcement for reinforced cement concrete in :

(A) Foundation and Plinth.

8 Providing TMT FE - 500 bar reinforcement for R.C.C. work including bending binding 777.00 76.21 Kg.

and placing in position complete up to floor two level.

9 Providing laying controlled cement concrete M-250 work with curing complete

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( A ) Foundations footings Base of columns and mass concrete. 5.00 4,394.51 Cumt

10 Providing laying controlled cement concrete M-250 work with curing complete 1.00 6,537.73 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( B ) Slabs, landing, shelvas, Balconies etc

11 Providing laying controlled cement concrete M-250 work with curing complete 0.50 5,831.74 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( C ) Ground Beams and Plinth Beams

ITEM DESCRIPTION QTY. RATE UNIT

12 Providing laying controlled cement concrete M-250 work with curing complete 0.50 6,157.97 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( C-1 ) Beams, Girders and cantilever

13 Providing laying controlled cement concrete M-250 work with curing complete 1.00 7,632.57 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

(D-1 ) Columns, pillars posts and struts square, rectangular, polygonal in plan

14 Providing laying controlled cement concrete M-250 work with curing complete 0.40 7,079.09 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

15 Providing laying controlled cement concrete M-250 work with curing complete 1.00 6,667.01 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

16 Providing laying controlled cement concrete M-250 work with curing complete 0.20 6,228.67 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( I ) Coping & Sill

17 Brickwork using common burnt clay building bricks having crushing strength not 0.50 4,021.02 Cumt

less than 35 kg./ Sq. Cm.in Cement Mortar 1:6 (1- Cement : 6 -fine sand) in

(B ) Conventional

18 Brickwork using common burnt clay building bricks having crushing strength not 2.00 4,295.99 Cumt

less than 35 kg./ Sq. Cm.in Cement Mortar 1:6 (1- Cement : 6 -fine sand) in

(B ) Conventional

19 Half brick masonry in common brunt clay building bricks having crushing strength 3.00 653.01 Sqm

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement :4 -coarse sand) in

(B ) Conventional

20 Providing & fixing 35mm thick Fiber flush shutter with 1.5 to 2.0mm thick fire 4.00 1,269.63 Sqmt

retardent gradde FRP skin in depressed panel design having extra reinforcement of

sider & edges & in gel coat finish. The core of the shutter is to be filled up with

injected retardent grade polyurethane foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fixtures. The whole FRP frame &

shutter is to be waterproof, weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S. S hinges with necessary screws &

alluminium fixtures & fastenings.

21 Providing and fixing standard extruded of alluminium section of size 63 mm x 38.10 0.70 1,175.56 Sqmt

mm x 1.2 mm ( of Jindal Section No. 2434 @ wt 0.643 kg/rmt ) with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details etc

complete for ventilation.

ITEM DESCRIPTION QTY. RATE UNIT

22 Providing and fixing M.S. grills of required pattern to wooden frames/or Marble 32.00 107.06 Kg

Frame of window/balcony etc. with M.s. flats at required spacing and frames all-

round, square or round bars fixed with round headed bolts and nuts or by screws,

including oil painting with one coat of primer of approved quality and brand & two

coats of synthetic enamel oil paint etc. complete as per detail drawing and as

directed by Engineer in charge.

(B) Plain grill

23 Providing 15 mm. thick mala cement plaster in single coat on fair side of 22.00 153.20 Sqmt

Brick/concrete walls for interior plastering upto floor two level and finished even

and smooth in Cement mortar 1:4 [1 cement: 4 sand) including necessary curing,

scaffolding, in true line and level etc. complete as directed by Engineer in Charge.

24 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of 4.00 140.95 Sqmt

Ceiling surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished

even and smooth in C.M. 1:4 (1 cement : 4 Sand ) including necessary curing,

scaffolding, in true line and level etc. complete as directed by Engineer in Charge.

25 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m 31.00 300.66 Sqmt

height from ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement

: 3 sand ) and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including

curing, necessary scaffolding in true line & level etc. comp. as directed by Engineer in

26 Providing throating or plaster drip and moulding to RCC Chhajja 3.00 42.17 Rmt

27 Providing cement vata ( 10 cm x 10 cm size ) quarter round in cement mortar 1:1 3.00 23.68 Rmt

including neat cement finishing, watering etc. complete

28 Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or 26.00 40.59 Sqmt

equivalent & two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth.

29 Wall painting ( Two Coats ) with paint of approved brand and manufacture on wall 22.00 80.35 Sqmt

surfaces to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand paper smooth.

30 Painting ( Two Coats ) with paint of approved brand and manufacture and of 4.00 85.76 Sqmt

required shade on ceilings and sloping roofs surface to give an even shade including

throughly brushing the surface free from mortar dropping and other foreign matter

and also including preparing the surface even and sand papered smooth.

31 Finishing wall with weather proof exterior acrylic emulsion paint on wall surface ( 31.00 114.53 Sqmt

three coats) to give an required shape even shade including a priming coat with

alkali resistance primer of approved brand after thoroughly brushing the all

materials.etc complete as directed by Engineer in Charge.

32 P & L vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement 5.00 1,397.83 Sqmt

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the surface etc.

complete, size & shade approved by Engineer in charge. for Antiskid

ITEM DESCRIPTION QTY. RATE UNIT

33 Providing and laying China Mosaic Type Water Proofing treatment on terrace 5.00 747.29 Sqmt

including (a) applying neat cement slurry 2.75 kg./ sqm of cement admixed with

water proofing compound after cleaning the surface . (b) laying cement concrete

using brick bats 25 to 100mm size with 50 % of C.M. 1:5 ( 1 cement : 5 coarse sand )

admixed with water proofing compound over 20mm thick layer of c.m. 1:5 to

required slope including rounding of junction of walls and slabs. (c) After two days

of proper curing , applying a second coat of cement slurry. (d) Finishing the surface

with 20mm thick C.M. 1:4 and China mosaic tilling & finally finishing the surface with

trowel with white cement slurry. (e) after finishing the whole terrace shall be

flooded with water for a period of two weeks.

34 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 6.00 277.43 Rmt

polyurethane pipes of the following outside Dia. Low density, complete with special

flange compression type fittings, wall clips etc. including making good the wall

ceiling and floor.

35 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 5.00 336.24 Rmt

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

36 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B 7.00 836.73 Rmt

pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm

length x 145 mm high at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc. including

testing of pies and joints and jointed with adhesive solvent cement including cost of

37 Construction of brick masonry chamber inside dimension as below & required 1.00 2,932.93 No.

depth for drainage pipeline, with required inlet and outlet for under ground C.I.

inspection chamber and with 230 mm thick brick wall having crushing strength not

less than 35 Kg. /sq.cm. in C.M.1:5 (1cement : 5 sand) C.I. Cover with frame(Light

duty 455 mm X 610 mm internal dimension, total weight of cover with frame not less

than 38 Kg. ( weight of cover 23 Kg and weight of frame 15 Kg),R.C.C. top slab with

1:2:4 ( 1 cement : 2 coarse sand : graded stone aggregate 20mm nominal size B.T.

Kapchi) foundation concrete 1:5:10) (1 cement : 5 sand :10graded stone aggregate

40 mm nominal size) inside plaster 15mm thick in cement mortar 1:3 (1cement :

sand ) finished smooth with floating coat of neat cement slurry on walls and bed

concrete curing etc. in true line and level/slope etc. complete as directed by Engineer

Inside dimension 455 mm x 610 mm and 450 deep or more for pipe line with one or

38 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 1.00 1,371.38 No.

580mm of superior colours including "P or S" trap, earthwork, bed concrete, foot

rest , etc. complete as directed by EIC.

39 Providing and fixing wash down water closet (European type, W.C. Pan) with integral 2.00 1,734.95 No.

P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement

: 1-Fine sand), complete as directed by EIC.

40 Providing and fixing 15mm dia. brass screw down Angular Stop Tap with wall flange 2.00 205.83 No.

with wall flange of approved quality including fixing in pipeline etc. complete as

irected by Engineer Incharge.

41 Providing and fixing 15mm dia. brass polished bright screw down Bib taps in 1.00 186.83 No.

pipeline of approved quality etc. complete as directed by Engineer In charge.

ITEM DESCRIPTION QTY. RATE UNIT

42 Providing and fixing 40mm dia. gun metal check or non return full way wheel valve 1.00 663.43 No.

in pipeline of approved quality etc. complete as directed by Engineer In charge.

43 Providing and fixing 25mm dia. gun metal check or non return full way wheel valve 1.00 420.63 No.

in pipeline of approved quality etc. complete as directed by Engineer In charge.

44 Providing & fixing 75 mm dia. PVC SWR " Cowl Vent" of ISI make of working 1.00 43.43 No.

pressure 4 Kg/sq.cm. with adhesive solvent cement etc. in true line and level etc.

complete as directed by Engineer In charge.

45 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) 5.00 91.84 Rmt

line including fitting of PRINCE / SUPREME / ASTRAL/FINOLEX or equivalent as

approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of

clamp at every two meter C/C or shall be concealed as directed including testing of

pipe and joints and fixing the same with adhesive solvent ,including cost of all

46 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 75 mm diameter with 1.00 558.36 No.

jali of the following nominal diameter of self cleansing design with C.I. Scread down

or hinged grating including the cost of cutting and making good the walls.

47 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 1.00 1,506.45 No.

brackets painted white including sutting holes and making good the same but

excluding fittings. (A) Vitreous China (ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

48 Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber and 1.00 1,246.92 No.

water tight C.I. cover with frame of 300 mm x 300 mm size (Inside) with standard

weight (I) Square mouth traps (B) 150 mm x 100 mm size P of S type

49 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of 500.00 3.95 Litre

required capacity each with al necessary fitting & connection etc Comp. on terrace.

50 Carrying out plinth treatment to post construction / existing structure by spraying 2.80 124.28 Sqmt

chemical solution for termite control treatment including labour and material

consistent with I.S.I. specification

51 Dismantalling of Existing building dismantling like concrete work like (1.00) 25,250.00 Nos. (25,250.00)

columns,beam,slab etc. Brick work, Cutting steel and reinforcement, Door,

Window,Wood work, Electrical wiring AC sheet, GI pipes all material etc complete

including giving the credit value of the useful serviceable material of the building as

upset value fixed by valuer and disposing of the unused unserviceable material

debris etc at the place with all lead and lift shown by engineer in charge etc complete

as directed and removing the structure below GL as directed by engineer in charge. (

Credit value shall not be quoted less than Rs. 25,000.00 /- )

Add 10% Electrical Works

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 06 : JOGIYA NI NAL

ITEM DESCRIPTION QTY. RATE UNIT

1 Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C member 113.00 19.57 Sqm

including stacking of serviceable material and disposal of unserviceable from site of work

with all lead and lift.

2 Demolition of terrace including stacking of serviceable materials and disposal of 8.00 63.80 Sqm

unserviceable materials with all lead and lift.

(i) Brick tile flooring

3 Dismentling of tiled of stone floors laid in mortar including stacking of serviceable materials 16.00 48.21 Sqm

and disposal of unserviceable material with all lead and lift

4 Providing 15 mm. thick mala cement plaster in single coat on fair side of Brick/concrete Walls 24.00 134.43 Sqm

for interior plastering upto floor two level and finished even and smooth in Cement mortar

1:4 [1 cement: 4 sand) including necessary curing, scaffolding, in true line and level etc.

complete as directed by Engineer in Charge.

5 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of Ceiling 9.00 140.95 Sqm

surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished even and smooth in

C.M. 1:4 (1 cement : 4 Sand ) including necessary curing, scaffolding, in true line and level etc.

complete as directed by Engineer in Charge.

6 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m height from 92.00 300.66 Sqm

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand ) and 8mm

thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including curing, necessary scaffolding in

true line & level etc. comp. as directed by Engineer in charge

7 Wall painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture 22.00 120.87 Sqm

on wall surfaces to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand paper smooth.

8 Painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture and 8.00 128.51 Sqm

of required shade on ceilings and sloping roofs surface to give an even shade including

throughly brushing the surface free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered smooth.

9 Finishing wall with painting of weather proof exterior acrylic emulsion paint on wall surface ( 66.00 114.53 Sqm

three coats) to give an required shape even shade including a priming coat with alkali

resistance primer of approved brand after thoroughly brushing the all materials.etc complete

as directed by Engineer in Charge with

10 Providing and laying China Mosaic Type Water Proofing treatment on terrace including (a) 8.00 747.29 Sqm

applying neat cement slurry 2.75 kg./ sqm of cement admixed with water proofing compound

after cleaning the surface . (b) laying cement concrete using brick bats 25 to 100mm size with

50 % of C.M. 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing compound over

20mm thick layer of c.m. 1:5 to required slope including rounding of junction of walls and

slabs. (c) After two days of proper curing , applying a second coat of cement slurry. (d)

Finishing the surface with 20mm thick C.M. 1:4 and China mosaic tilling & finally finishing the

surface with trowel with white cement slurry. (e) after finishing the whole terrace shall be

flooded with water for a period of two weeks.

11 P & L Vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 80.00 1397.83 Sqm

( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete, size & shade approved by

Engineer in charge. For Antiskid

ITEM DESCRIPTION QTY. RATE UNIT

12 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. 461.00 104.04 Kg

flats at required spacings and frame alround, square or round bars with round headed bolts

and nuts or by screws.

(A) Plain Grill.

13 Providing & fixing 35mm thick Fiber Glass shutter with 1.5 to 2.0mm thick fire retardent 9.00 1269.63 Sqm

gradde FRP skin in depressed panel design having extra reinforcement of sider & edges & in

gel coat finish. The core of the shutter is to be filled up with injected retardent grade

polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fixtures. The whole FRP frame & shutter is to be waterproof, weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S. S hinges with

necessary screws & alluminium fixtures & fastenings.

14 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 3.00 1175.56 Sqm

1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc. complete for Ventilation

15 Dismantling Santtary fittings like wash basin, W.C. pan Indian and European type, flushing 6.00 405.65 No.

tank etc. including stacking the materials with all lead and lift

16 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 580mm of 3.00 1371.38 No.

superior colours including "P or S" trap, earthwork, bed concrete, foot rest , etc. complete as

directed by EIC.

17 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S 3.00 1734.95 No.

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-Fine sand),

complete as directed by EIC.

18 Providing and fixing Flat back long pattern Urinal "Cera, Hindware,Jaquar or equivalent make" 2.00 1036.27 No.

of approved quality including urinal flush vave 15mm size control cock with 300mm long

connecting CP pipe and nuts and PVC waste coupline and concealed waste pipe etc comp.

(A) Earthenware 430 x 260 x 350 mm

19 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap 6.00 186.83 No.

polished bright.

20 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks 2.00 308.73 No.

21 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted 2.00 1506.45 Sqm

white including sutting holes and making good the same but excluding fittings. (A) Vitreous

China (ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

22 Providing & fixing 600 mm X 450 mm Bevelled edge Mirror of superior glass mounted on 6 2.00 833.73 Sqm

mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass screws and

washers, including fixing C.P. brass bracket support and guard rial fixed to woode plugs with

C.P. brass screws etc. complete as directed by engineer Incharge.

23 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of required 1000.00 3.95 Litre

capacity each with al necessary fitting & connection etc Comp. on terrace.sor

24 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B pipe 8.00 836.73 Rmt

conforming to IS 13592-1992 with one end plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm center

to center or shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pies and joints and jointed with adhesive solvent cement

including cost of all materials.

ITEM DESCRIPTION QTY. RATE UNIT

25 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) line 30.00 91.84 Rmt

including fitting of PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by

Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of clamp at every two meter

C/C or shall be concealed as directed including testing of pipe and joints and fixing the same

with adhesive solvent ,including cost of all material.

Add 10% Electrical Works

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 07 : BEHIND GAYATRI TEMPLE

ITEM DESCRIPTION QTY. RATE UNIT

1 Excavation for foundation up to 1.5 m depth including sorting out and stacking of 19.00 117.08 Cumt

useful materials and disposing of the excavated stuff up to all lead and lift. (A) Loose

2 Excavation for foundation for depth from 1.5 m to 3.0 m depth including sorting out 11.00 162.56 Cumt

and stacking or useful materials and disposing of the excavated stuff upto to all lead

(B) Dense or Hard Soil

3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of 19.00 130.39 Cumt

foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering.

4 Filling in plinth with sand under floors including watering reamming, consolidating 2.00 460.19 Cumt

and dressing etc. comp.

5 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. 2.00 289.06 Cumt

thickness including watering ramming and consolidating etc. completed.

6 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand 2.00 2,680.21 Cumt

broken stone aggregate 40 mm nominal size) and curing complete excluding cost of

(A) Foundation and Plinth.

7 Providing and laying cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded 1.00 3,683.34 Cumt

stone aggregates 20 m.m. nominal size) and curing complete excluding cost of form

work & reinforcement for reinforced cement concrete in :

(A) Foundation and Plinth.

8 Providing TMT FE - 500 bar reinforcement for R.C.C. work including bending binding 1,147.00 76.21 Kg.

and placing in position complete up to floor two level.

9 Providing laying controlled cement concrete M-250 work with curing complete

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( A ) Foundations footings Base of columns and mass concrete. 5.00 4,394.51 Cumt

10 Providing laying controlled cement concrete M-250 work with curing complete 1.00 6,537.73 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( B ) Slabs, landing, shelvas, Balconies etc

11 Providing laying controlled cement concrete M-250 work with curing complete 2.00 5,831.74 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( C ) Ground Beams and Plinth Beams

ITEM DESCRIPTION QTY. RATE UNIT

12 Providing laying controlled cement concrete M-250 work with curing complete 2.00 6,157.97 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( C-1 ) Beams, Girders and cantilever

13 Providing laying controlled cement concrete M-250 work with curing complete 1.00 7,632.57 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

(D-1 ) Columns, pillars posts and struts square, rectangular, polygonal in plan

14 Providing laying controlled cement concrete M-250 work with curing complete 0.40 7,079.09 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

15 Providing laying controlled cement concrete M-250 work with curing complete 1.00 6,667.01 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

16 Providing laying controlled cement concrete M-250 work with curing complete 0.40 6,228.67 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( I ) Coping & Sill

17 Brickwork using common burnt clay building bricks having crushing strength not 1.00 4,021.02 Cumt

less than 35 kg./ Sq. Cm.in Cement Mortar 1:6 (1- Cement : 6 -fine sand) in

(B ) Conventional

18 Brickwork using common burnt clay building bricks having crushing strength not 5.00 4,295.99 Cumt

less than 35 kg./ Sq. Cm.in Cement Mortar 1:6 (1- Cement : 6 -fine sand) in

(B ) Conventional

19 Half brick masonry in common brunt clay building bricks having crushing strength 8.00 653.01 Sqm

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement :4 -coarse sand) in

(B ) Conventional

20 Providing & fixing 35mm thick Fiber flush shutter with 1.5 to 2.0mm thick fire 8.00 1,269.63 Sqmt

retardent gradde FRP skin in depressed panel design having extra reinforcement of

sider & edges & in gel coat finish. The core of the shutter is to be filled up with

injected retardent grade polyurethane foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fixtures. The whole FRP frame &

shutter is to be waterproof, weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S. S hinges with necessary screws &

alluminium fixtures & fastenings.

21 Providing and fixing standard extruded of alluminium section of size 63 mm x 38.10 1.40 1,175.56 Sqmt

mm x 1.2 mm ( of Jindal Section No. 2434 @ wt 0.643 kg/rmt ) with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details etc

complete for ventilation.

ITEM DESCRIPTION QTY. RATE UNIT

22 Providing and fixing M.S. grills of required pattern to wooden frames/or Marble 64.00 107.06 Kg

Frame of window/balcony etc. with M.s. flats at required spacing and frames all-

round, square or round bars fixed with round headed bolts and nuts or by screws,

including oil painting with one coat of primer of approved quality and brand & two

coats of synthetic enamel oil paint etc. complete as per detail drawing and as directed

by Engineer in charge.

(B) Plain grill

23 Providing 15 mm. thick mala cement plaster in single coat on fair side of 70.00 153.20 Sqmt

Brick/concrete walls for interior plastering upto floor two level and finished even

and smooth in Cement mortar 1:4 [1 cement: 4 sand) including necessary curing,

scaffolding, in true line and level etc. complete as directed by Engineer in Charge.

24 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of 8.00 140.95 Sqmt

Ceiling surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished

even and smooth in C.M. 1:4 (1 cement : 4 Sand ) including necessary curing,

scaffolding, in true line and level etc. complete as directed by Engineer in Charge.

25 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m 50.00 300.66 Sqmt

height from ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement

: 3 sand ) and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including

curing, necessary scaffolding in true line & level etc. comp. as directed by Engineer in

26 Providing throating or plaster drip and moulding to RCC Chhajja 6.00 42.17 Rmt

27 Providing cement vata ( 10 cm x 10 cm size ) quarter round in cement mortar 1:1 6.00 23.68 Rmt

including neat cement finishing, watering etc. complete

28 Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or 78.00 40.59 Sqmt

equivalent & two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth.

29 Wall painting ( Two Coats ) with paint of approved brand and manufacture on wall 70.00 80.35 Sqmt

surfaces to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand paper smooth.

30 Painting ( Two Coats ) with paint of approved brand and manufacture and of 8.00 85.76 Sqmt

required shade on ceilings and sloping roofs surface to give an even shade including

throughly brushing the surface free from mortar dropping and other foreign matter

and also including preparing the surface even and sand papered smooth.

31 Finishing wall with weather proof exterior acrylic emulsion paint on wall surface ( 50.00 114.53 Sqmt

three coats) to give an required shape even shade including a priming coat with

alkali resistance primer of approved brand after thoroughly brushing the all

materials.etc complete as directed by Engineer in Charge.

32 P & L vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement 11.00 1,397.83 Sqmt

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the surface etc.

complete, size & shade approved by Engineer in charge. for Antiskid

ITEM DESCRIPTION QTY. RATE UNIT

33 Providing and laying China Mosaic Type Water Proofing treatment on terrace 9.00 747.29 Sqmt

including (a) applying neat cement slurry 2.75 kg./ sqm of cement admixed with

water proofing compound after cleaning the surface . (b) laying cement concrete

using brick bats 25 to 100mm size with 50 % of C.M. 1:5 ( 1 cement : 5 coarse sand )

admixed with water proofing compound over 20mm thick layer of c.m. 1:5 to

required slope including rounding of junction of walls and slabs. (c) After two days

of proper curing , applying a second coat of cement slurry. (d) Finishing the surface

with 20mm thick C.M. 1:4 and China mosaic tilling & finally finishing the surface with

trowel with white cement slurry. (e) after finishing the whole terrace shall be

flooded with water for a period of two weeks.

34 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 12.00 277.43 Rmt

polyurethane pipes of the following outside Dia. Low density, complete with special

flange compression type fittings, wall clips etc. including making good the wall ceiling

35 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 5.00 336.24 Rmt

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

36 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B 7.00 836.73 Rmt

pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm

length x 145 mm high at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc. including

testing of pies and joints and jointed with adhesive solvent cement including cost of

37 Construction of brick masonry chamber inside dimension as below & required 1.00 2,932.93 No.

depth for drainage pipeline, with required inlet and outlet for under ground C.I.

inspection chamber and with 230 mm thick brick wall having crushing strength not

less than 35 Kg. /sq.cm. in C.M.1:5 (1cement : 5 sand) C.I. Cover with frame(Light

duty 455 mm X 610 mm internal dimension, total weight of cover with frame not less

than 38 Kg. ( weight of cover 23 Kg and weight of frame 15 Kg),R.C.C. top slab with

1:2:4 ( 1 cement : 2 coarse sand : graded stone aggregate 20mm nominal size B.T.

Kapchi) foundation concrete 1:5:10) (1 cement : 5 sand :10graded stone aggregate

40 mm nominal size) inside plaster 15mm thick in cement mortar 1:3 (1cement :

sand ) finished smooth with floating coat of neat cement slurry on walls and bed

concrete curing etc. in true line and level/slope etc. complete as directed by Engineer

Inside dimension 455 mm x 610 mm and 450 deep or more for pipe line with one or

38 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 4.00 1,371.38 No.

580mm of superior colours including "P or S" trap, earthwork, bed concrete, foot

rest, etc. complete as directed by EIC.

39 Providing and fixing wash down water closet (European type, W.C. Pan) with integral 4.00 1,734.95 No.

P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement :

1-Fine sand), complete as directed by EIC.

40 Providing and fixing 15mm dia. brass screw down Angular Stop Tap with wall flange 4.00 205.83 No.

with wall flange of approved quality including fixing in pipeline etc. complete as

irected by Engineer Incharge.

41 Providing and fixing 15mm dia. brass polished bright screw down Bib taps in 2.00 186.83 No.

pipeline of approved quality etc. complete as directed by Engineer In charge.

ITEM DESCRIPTION QTY. RATE UNIT

42 Providing and fixing 40mm dia. gun metal check or non return full way wheel valve 1.00 663.43 No.

in pipeline of approved quality etc. complete as directed by Engineer In charge.

43 Providing and fixing 25mm dia. gun metal check or non return full way wheel valve 1.00 420.63 No.

in pipeline of approved quality etc. complete as directed by Engineer In charge.

44 Providing & fixing 75 mm dia. PVC SWR " Cowl Vent" of ISI make of working 1.00 43.43 No.

pressure 4 Kg/sq.cm. with adhesive solvent cement etc. in true line and level etc.

complete as directed by Engineer In charge.

45 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) 5.00 91.84 Rmt

line including fitting of PRINCE / SUPREME / ASTRAL/FINOLEX or equivalent as

approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of

clamp at every two meter C/C or shall be concealed as directed including testing of

pipe and joints and fixing the same with adhesive solvent ,including cost of all

46 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 75 mm diameter with 1.00 558.36 No.

jali of the following nominal diameter of self cleansing design with C.I. Scread down

or hinged grating including the cost of cutting and making good the walls.

47 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 1.00 1,506.45 No.

brackets painted white including sutting holes and making good the same but

excluding fittings. (A) Vitreous China (ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

48 Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber and 2.00 1,246.92 No.

water tight C.I. cover with frame of 300 mm x 300 mm size (Inside) with standard

weight (I) Square mouth traps (B) 150 mm x 100 mm size P of S type

49 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of 500.00 3.95 Litre

required capacity each with al necessary fitting & connection etc Comp. on terrace.

50 Carrying out plinth treatment to post construction / existing structure by spraying 5.86 124.28 Sqmt

chemical solution for termite control treatment including labour and material

consistent with I.S.I. specification

51 Dismantalling of Existing building dismantling like concrete work like (1.00) 25,250.00 Nos. (25,250.00)

columns,beam,slab etc. Brick work, Cutting steel and reinforcement, Door,

Window,Wood work, Electrical wiring AC sheet, GI pipes all material etc complete

including giving the credit value of the useful serviceable material of the building as

upset value fixed by valuer and disposing of the unused unserviceable material

debris etc at the place with all lead and lift shown by engineer in charge etc complete

as directed and removing the structure below GL as directed by engineer in charge. (

Credit value shall not be quoted less than Rs. 25,000.00 /- )

Add 10% Electrical Works

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 11 : SUTHAR CHAWL MISSION COLONY

ITEM DESCRIPTION QTY. RATE UNIT

1 Excavation for foundation up to 1.5 m depth including sorting out and stacking of 28.00 117.08 Cumt

useful materials and disposing of the excavated stuff up to all lead and lift. (A) Loose

2 Excavation for foundation for depth from 1.5 m to 3.0 m depth including sorting out 16.00 162.56 Cumt

and stacking or useful materials and disposing of the excavated stuff upto to all lead

(B) Dense or Hard Soil

3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of 31.00 130.39 Cumt

foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering.

4 Filling in plinth with sand under floors including watering reamming, consolidating 2.00 460.19 Cumt

and dressing etc. comp.

5 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. 2.00 289.06 Cumt

thickness including watering ramming and consolidating etc. completed.

6 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 hand broken 2.00 2,680.21 Cumt

stone aggregate 40 mm nominal size) and curing complete excluding cost of form

(A) Foundation and Plinth.

7 Providing and laying cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded 1.00 3,683.34 Cumt

stone aggregates 20 m.m. nominal size) and curing complete excluding cost of form

work & reinforcement for reinforced cement concrete in :

(A) Foundation and Plinth.

8 Providing TMT FE - 500 bar reinforcement for R.C.C. work including bending binding 1,169.00 76.21 Kg.

and placing in position complete up to floor two level.

9 Providing laying controlled cement concrete M-250 work with curing complete

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( A ) Foundations footings Base of columns and mass concrete. 7.00 4,394.51 Cumt

10 Providing laying controlled cement concrete M-250 work with curing complete 1.00 6,537.73 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( B ) Slabs, landing, shelvas, Balconies etc

11 Providing laying controlled cement concrete M-250 work with curing complete 1.00 5,831.74 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( C ) Ground Beams and Plinth Beams

ITEM DESCRIPTION QTY. RATE UNIT

12 Providing laying controlled cement concrete M-250 work with curing complete 1.00 6,157.97 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( C-1 ) Beams, Girders and cantilever

13 Providing laying controlled cement concrete M-250 work with curing complete 2.00 7,632.57 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

(D-1 ) Columns, pillars posts and struts square, rectangular, polygonal in plan

14 Providing laying controlled cement concrete M-250 work with curing complete 0.40 7,079.09 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

15 Providing laying controlled cement concrete M-250 work with curing complete 1.00 6,667.01 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

16 Providing laying controlled cement concrete M-250 work with curing complete 0.40 6,228.67 Cumt

including the cost of form work and excluding the rate of reinforcement for

reinforced concrete work in.

Upto floor two level

( I ) Coping & Sill

17 Brickwork using common burnt clay building bricks having crushing strength not less 1.00 4,021.02 Cumt

than 35 kg./ Sq. Cm.in Cement Mortar 1:6 (1- Cement : 6 -fine sand) in

(B ) Conventional

18 Brickwork using common burnt clay building bricks having crushing strength not less 4.00 4,295.99 Cumt

than 35 kg./ Sq. Cm.in Cement Mortar 1:6 (1- Cement : 6 -fine sand) in

(B ) Conventional

19 Half brick masonry in common brunt clay building bricks having crushing strength 10.00 653.01 Sqm

not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement :4 -coarse sand) in

(B ) Conventional

20 Providing & fixing 35mm thick Fiber flush shutter with 1.5 to 2.0mm thick fire 11.00 1,269.63 Sqmt

retardent gradde FRP skin in depressed panel design having extra reinforcement of

sider & edges & in gel coat finish. The core of the shutter is to be filled up with

injected retardent grade polyurethane foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fixtures. The whole FRP frame &

shutter is to be waterproof, weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S. S hinges with necessary screws &

alluminium fixtures & fastenings.

21 Providing and fixing standard extruded of alluminium section of size 63 mm x 38.10 2.90 1,175.56 Sqmt

mm x 1.2 mm ( of Jindal Section No. 2434 @ wt 0.643 kg/rmt ) with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details etc

complete for ventilation.

ITEM DESCRIPTION QTY. RATE UNIT

22 Providing and fixing M.S. grills of required pattern to wooden frames/or Marble 128.00 107.06 Kg

Frame of window/balcony etc. with M.s. flats at required spacing and frames all-

round, square or round bars fixed with round headed bolts and nuts or by screws,

including oil painting with one coat of primer of approved quality and brand & two

coats of synthetic enamel oil paint etc. complete as per detail drawing and as directed

by Engineer in charge.

(B) Plain grill

23 Providing 15 mm. thick mala cement plaster in single coat on fair side of 66.00 153.20 Sqmt

Brick/concrete walls for interior plastering upto floor two level and finished even

and smooth in Cement mortar 1:4 [1 cement: 4 sand) including necessary curing,

scaffolding, in true line and level etc. complete as directed by Engineer in Charge.

24 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of 10.00 140.95 Sqmt

Ceiling surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished even

and smooth in C.M. 1:4 (1 cement : 4 Sand ) including necessary curing, scaffolding, in

true line and level etc. complete as directed by Engineer in Charge.

25 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m 46.00 300.66 Sqmt

height from ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement

: 3 sand ) and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including

curing, necessary scaffolding in true line & level etc. comp. as directed by Engineer in

26 Providing throating or plaster drip and moulding to RCC Chhajja 6.00 42.17 Rmt

27 Providing cement vata ( 10 cm x 10 cm size ) quarter round in cement mortar 1:1 6.00 23.68 Rmt

including neat cement finishing, watering etc. complete

28 Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or 76.00 40.59 Sqmt

equivalent & two coats of primer of approved brand and manufacture on new wall

surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth.

29 Wall painting ( Two Coats ) with paint of approved brand and manufacture on wall 66.00 80.35 Sqmt

surfaces to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand paper smooth.

30 Painting ( Two Coats ) with paint of approved brand and manufacture and of required 10.00 85.76 Sqmt

shade on ceilings and sloping roofs surface to give an even shade including throughly

brushing the surface free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered smooth.

31 Finishing wall with weather proof exterior acrylic emulsion paint on wall surface ( 46.00 114.53 Sqmt

three coats) to give an required shape even shade including a priming coat with alkali

resistance primer of approved brand after thoroughly brushing the all materials.etc

complete as directed by Engineer in Charge.

32 P & L vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement 16.00 1,397.83 Sqmt

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the surface etc.

complete, size & shade approved by Engineer in charge. for Antiskid

ITEM DESCRIPTION QTY. RATE UNIT

33 Providing and laying China Mosaic Type Water Proofing treatment on terrace 9.00 747.29 Sqmt

including (a) applying neat cement slurry 2.75 kg./ sqm of cement admixed with

water proofing compound after cleaning the surface . (b) laying cement concrete

using brick bats 25 to 100mm size with 50 % of C.M. 1:5 ( 1 cement : 5 coarse sand )

admixed with water proofing compound over 20mm thick layer of c.m. 1:5 to

required slope including rounding of junction of walls and slabs. (c) After two days

of proper curing , applying a second coat of cement slurry. (d) Finishing the surface

with 20mm thick C.M. 1:4 and China mosaic tilling & finally finishing the surface with

trowel with white cement slurry. (e) after finishing the whole terrace shall be flooded

with water for a period of two weeks.

34 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 9.00 277.43 Rmt

polyurethane pipes of the following outside Dia. Low density, complete with special

flange compression type fittings, wall clips etc. including making good the wall ceiling

35 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 5.00 336.24 Rmt

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall ceiling

36 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B 3.00 836.73 Rmt

pipe conforming to IS 13592-1992 with one end plain and other end socketed with

rubbering, & fitting conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm

length x 145 mm high at every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as bends, shoes etc. including

testing of pies and joints and jointed with adhesive solvent cement including cost of

37 Construction of brick masonry chamber inside dimension as below & required depth 1.00 2,932.93 No.

for drainage pipeline, with required inlet and outlet for under ground C.I. inspection

chamber and with 230 mm thick brick wall having crushing strength not less than

Kg. /sq.cm. in C.M.1:5 (1cement : 5 sand) C.I. Cover with frame(Light duty 455 mm X

610 mm internal dimension, total weight of cover with frame not less than 38 Kg. (

weight of cover 23 Kg and weight of frame 15 Kg),R.C.C. top slab with 1:2:4 ( 1 cement

: 2 coarse sand : graded stone aggregate 20mm nominal size B.T. Kapchi) foundation

concrete 1:5:10) (1 cement : 5 sand :10graded stone aggregate 40 mm nominal size)

inside plaster 15mm thick in cement mortar 1:3 (1cement : 3 sand ) finished smooth

with floating coat of neat cement slurry on walls and bed concrete curing etc. in true

line and level/slope etc. complete as directed by Engineer In charge.

Inside dimension 455 mm x 610 mm and 450 deep or more for pipe line with one or

38 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 4.00 1,371.38 No.

580mm of superior colours including "P or S" trap, earthwork, bed concrete, foot rest

, etc. complete as directed by EIC.

39 Providing and fixing wash down water closet (European type, W.C. Pan) with integral 6.00 1,734.95 No.

P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement :

1-Fine sand), complete as directed by EIC.

40 Providing and fixing 15mm dia. brass screw down Angular Stop Tap with wall flange 6.00 205.83 No.

with wall flange of approved quality including fixing in pipeline etc. complete as

irected by Engineer Incharge.

41 Providing and fixing 15mm dia. brass polished bright screw down Bib taps in pipeline 2.00 186.83 No.

of approved quality etc. complete as directed by Engineer In charge.

ITEM DESCRIPTION QTY. RATE UNIT

42 Providing and fixing 40mm dia. gun metal check or non return full way wheel valve in 1.00 663.43 No.

pipeline of approved quality etc. complete as directed by Engineer In charge.

43 Providing and fixing 25mm dia. gun metal check or non return full way wheel valve in 1.00 420.63 No.

pipeline of approved quality etc. complete as directed by Engineer In charge.

44 Providing & fixing 75 mm dia. PVC SWR " Cowl Vent" of ISI make of working 1.00 43.43 No.

pressure 4 Kg/sq.cm. with adhesive solvent cement etc. in true line and level etc.

complete as directed by Engineer In charge.

45 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) 5.00 91.84 Rmt

line including fitting of PRINCE / SUPREME / ASTRAL/FINOLEX or equivalent as

approved by Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of

clamp at every two meter C/C or shall be concealed as directed including testing of

pipe and joints and fixing the same with adhesive solvent ,including cost of all

46 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 75 mm diameter with 1.00 558.36 No.

jali of the following nominal diameter of self cleansing design with C.I. Scread down

or hinged grating including the cost of cutting and making good the walls.

47 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 1.00 1,506.45 No.

brackets painted white including sutting holes and making good the same but

excluding fittings. (A) Vitreous China (ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

48 Providing and fixing S.W. gully trap with C.I. grating brick masonary chamber and 3.00 1,246.92 No.

water tight C.I. cover with frame of 300 mm x 300 mm size (Inside) with standard

weight (I) Square mouth traps (B) 150 mm x 100 mm size P of S type

49 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of 1,000.00 3.95 Litre

required capacity each with al necessary fitting & connection etc Comp. on terrace.

50 Carrying out plinth treatment to post construction / existing structure by spraying 5.86 124.28 Sqmt

chemical solution for termite control treatment including labour and material

consistent with I.S.I. specification

51 Dismantalling of Existing building dismantling like concrete work like (1.00) 25,250.00 Nos. (25,250.00)

columns,beam,slab etc. Brick work, Cutting steel and reinforcement, Door,

Window,Wood work, Electrical wiring AC sheet, GI pipes all material etc complete

including giving the credit value of the useful serviceable material of the building as

upset value fixed by valuer and disposing of the unused unserviceable material

debris etc at the place with all lead and lift shown by engineer in charge etc complete

as directed and removing the structure below GL as directed by engineer in charge. (

Credit value shall not be quoted less than Rs. 25,000.00 /- )

Add 10% Electrical Works

NAME OF WORK :- PROPOSED UPGRADATION OF OLD TOILET BLOCK AT 09 VARIOUS AREA

FOR VALSAD MUNICIPALITY, VALSAD

SCHEDULE 09 : NEAR ET BHATHA

ITEM DESCRIPTION QTY. RATE UNIT

1 Removing and scraping of old deteriorated plaster of any thickness from wall / R.C.C 165.00 19.57 Sqm

member including stacking of serviceable material and disposal of unserviceable from site of

work with all lead and lift.

2 Demolition of terrace including stacking of serviceable materials and disposal of 8.00 63.80 Sqm

unserviceable materials with all lead and lift.

(i) Brick tile flooring

3 Dismentling of tiled of stone floors laid in mortar including stacking of serviceable materials 10.00 48.21 Sqm

and disposal of unserviceable material with all lead and lift

4 Providing 15 mm. thick mala cement plaster in single coat on fair side of Brick/concrete 42.00 134.43 Sqm

Walls for interior plastering upto floor two level and finished even and smooth in Cement

mortar 1:4 [1 cement: 4 sand) including necessary curing, scaffolding, in true line and level

etc. complete as directed by Engineer in Charge.

5 Providing & applying 10 mm thick mala cement plaster in single coat on fair side of Ceiling 6.00 140.95 Sqm

surface/ Sloping Roof etc. for Ground Floor upto floor two levels finished even and smooth in

C.M. 1:4 (1 cement : 4 Sand ) including necessary curing, scaffolding, in true line and level etc.

complete as directed by Engineer in Charge.

6 Providing & applying 20mm thick sand faced cement plaster on walls upto 10m height from 134.00 300.66 Sqm

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand ) and 8mm

thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including curing, necessary scaffolding in

true line & level etc. comp. as directed by Engineer in charge

7 Wall painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture 38.00 120.87 Sqm

on wall surfaces to give an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand paper smooth.

8 Painting ( Three Coats ) with plastic emulsion paint of approved brand and manufacture and 6.00 128.51 Sqm

of required shade on ceilings and sloping roofs surface to give an even shade including

throughly brushing the surface free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered smooth.

9 Finishing wall with painting of weather proof exterior acrylic emulsion paint on wall surface 104.00 114.53 Sqm

( three coats) to give an required shape even shade including a priming coat with alkali

resistance primer of approved brand after thoroughly brushing the all materials.etc

complete as directed by Engineer in Charge with

10 Providing and laying China Mosaic Type Water Proofing treatment on terrace including (a) 8.00 747.29 Sqm

applying neat cement slurry 2.75 kg./ sqm of cement admixed with water proofing

compound after cleaning the surface . (b) laying cement concrete using brick bats 25 to

100mm size with 50 % of C.M. 1:5 ( 1 cement : 5 coarse sand ) admixed with water proofing

compound over 20mm thick layer of c.m. 1:5 to required slope including rounding of

junction of walls and slabs. (c) After two days of proper curing , applying a second coat of

cement slurry. (d) Finishing the surface with 20mm thick C.M. 1:4 and China mosaic tilling &

finally finishing the surface with trowel with white cement slurry. (e) after finishing the

whole terrace shall be flooded with water for a period of two weeks.

11 P & L Vitrified 8 to 10mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 111.00 1397.83 Sqm

( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color cement slurry including

finised with flush pointing & cleaning the surface etc. complete, size & shade approved by

Engineer in charge. For Antiskid

ITEM DESCRIPTION QTY. RATE UNIT

12 Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with 77.00 104.04 Kg

M.S. flats at required spacings and frame alround, square or round bars with round headed

bolts and nuts or by screws.

(A) Plain Grill.

13 Providing & fixing 35mm thick Fiber flush shutter with 1.5 to 2.0mm thick fire retardent 6.00 1269.63 Sqm

gradde FRP skin in depressed panel design having extra reinforcement of sider & edges & in

gel coat finish. The core of the shutter is to be filled up with injected retardent grade

polyurethane foam done in situ alongwith embedded wooden pieces for stiffening & also

taking hinges & fixtures. The whole FRP frame & shutter is to be waterproof, weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S. S hinges with

necessary screws & alluminium fixtures & fastenings.

14 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 2.00 1175.56 Sqm

1.2mm @ Wt. 0.643 Kg/mt with colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc. complete for Ventilation

15 Dismantling Santtary fittings like wash basin, W.C. pan Indian and European type, flushing 4.00 405.65 No.

tank etc. including stacking the materials with all lead and lift

16 Providing and fixing Water Closet Squattig Pan (Orissa pan) size 260 x 440mm x 580mm of 2.00 1371.38 No.

superior colours including "P or S" trap, earthwork, bed concrete, foot rest , etc. complete as

directed by EIC.

17 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S 2.00 1734.95 No.

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-Fine sand),

complete as directed by EIC.

18 Providing and fixing Flat back long pattern Urinal "Cera, Hindware,Jaquar or equivalent 2.00 1036.27 No.

make" of approved quality including urinal flush vave 15mm size control cock with 300mm

long connecting CP pipe and nuts and PVC waste coupline and concealed waste pipe etc

(A) Earthenware 430 x 260 x 350 mm

19 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap 6.00 186.83 No.

polished bright.

20 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks 2.00 308.73 No.

21 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets 2.00 1506.45 Sqm

painted white including sutting holes and making good the same but excluding fittings. (A)

Vitreous China (ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

22 Providing & fixing 600 mm X 450 mm Bevelled edge Mirror of superior glass mounted on 6 2.00 833.73 Sqm

mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P.brass screws and

washers, including fixing C.P. brass bracket support and guard rial fixed to woode plugs with

C.P. brass screws etc. complete as directed by engineer Incharge.

23 Providing and fixing double coated syntex or equivalent PVC (ISI) mark water tank of 1000.00 3.95 Litre

required capacity each with al necessary fitting & connection etc Comp. on terrace.sor

24 Providing laying and jointing in true line and level 110 diameter U.P.V.C. SWR Type B pipe 8.00 836.73 Rmt

conforming to IS 13592-1992 with one end plain and other end socketed with rubbering, &

fitting conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm high at every 2000 mm

center to center or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pies and joints and jointed with adhesive solvent

cement including cost of all materials.

ITEM DESCRIPTION QTY. RATE UNIT

25 Providing , Laying and jointing in true line and level 25 mm dia UPVC pipe (SCH-40) line 20.00 91.84 Rmt

including fitting of PRINCE/SUPREME/ASTRAL/FINOLEX or equivalent as approved by

Engineer in-Charge.Pipe Shall be Fixed on the wall with the help of clamp at every two meter

C/C or shall be concealed as directed including testing of pipe and joints and fixing the same

with adhesive solvent ,including cost of all material.

Add 10% Electrical Works