Restoration Conservation-Development of Historical Masjid Hamam and allied works at Malsha Masjid Malshahi Bagh District Ganderbal.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : as per the directions of Engineer Incharge complete.

P/L, of dry stone soling in the excavated trenches duly hand packed for foundation and backfilling with ramming, dressing, and compacting all inclusive leads, lifts, loading, un-loading, cost and carriage of material involved complete finished work to be measured.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) complete.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns etc complete.

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) all complete.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) all complete.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate complete.

Providing and supplyinh of (A Class) good earth from approved source by mechanical transport including ramming, watering, levelling and all carriages of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation and consolidation by PRR of 8-10 ton road roller etc all complete job.

Supplying, stacking and filling of stones behind R/Wall as back filling (filter media) including watering, ramming, dressing , compacting all carriages involved complete job.

Providing and fixing of PVC pipes 75mm dia for weep holes ( B-Type) of approved brand and manufacture all complete.

Carriage of Material:- Stone agg. 40mm avg. lead of 10 Kms

Sand for an avg. lead of 14 Kms

Stones for an avg. lead of 45 Kms

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared all complete.

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared all complete.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 30 cm girth upto and including 60 cm girth all complete .

Beyond 60 cm girth upto and including 120 cm girth. all complete

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar .

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed including all carriages of 30 Km subject to actual.

Providing and laying rough chisel dressed Devri Stone in kerbs, of size 200x200 mm face with chamfer in cement mortar 1: 6 (1 cement : 6 coarse sand) including curing complete.

Carriage of Devri stones avg 30 Kms by MT including all head load as required all complete.

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In lime mortar all complete.

Random Rubble masonry with hard stone (Nallah) in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) all complete.

Labour charges for the refixing of Random Rubble stone Masonary in position in lime mortar incl cost of scaffolding, watering, incl. all carriages involved with head load , laying/handling etc complete job.

Labour charges for the refixing of Baramulla stone in position in lime surkhi mortar 50mm thick having menimum length of 6 feet (Six Feet) incl. all carriages involved with head load , laying/handling etc complete job.

Providing and laying in position lime concrete with graded stone/brick aggregate 40 mm nominal size and 40% mortar comprising of 1:1:1 (1 lime putty: 1surkhi: 1fine sand) including curing complete but excluding cost of centering andshuttering. All works upto plinth level with: Graded Stone Aggregate all complete.

20-25mm thick Plaster on stone work with lime surkhi mortar 1:2:1 mix ( 1 lime putty: 2 fine sand: 1 Surkhi) on walls upto floor V-Level incl. scaffolding charges and all carriages involved upto site of work complete job as required at site & all complete in all respects as directed by Engineer Incharge.

Providing and laying in position lime concrete with graded stone/brick aggregate 40 mm nominal size and 40% mortar comprising of 1:1:1 (1 lime putty: 1surkhi: 1fine sand) including curing complete but excluding cost of centering and shuttering. All works upto plinth level with: With graded brick aggregate all complete. & including all carriage complete.

Supply and laying in layers (A-Class) good earth including compaction and watering with hand roller as per directions of Engineer Incharge/Archologist etc all as per direction of EIC complete in all respects.

Providing and fixing of TAR Insulation sheets/Thermal Insulation/Protection with specified black polythene sheets of thickness 1mm laid/wrapped on walls/ceiling/floors etc complete as per directions of Engineer Incharge with Polythene sheets.with all carriage involved complete in all respects.

Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in: Lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 fine sand) incl. Extra for tile bricks masonry with common burnt clay tile bricks in superstructure above plinth level upto floor five level incl. Extra for tile bricks masonry with common burnt clay tile bricks in square or rectangular pillars all complete.

Prepration of site plan through Digital Theodolite (ETS) including prepration of drawings in hard and soft copies including videography/photography as and when required before, during and after completion of work etc all complete as per directions of Engineer Incharge.

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-495601 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage all complete.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting walls with Multi colour shades of Red/Orange/Yellow/Green/Blue/Indigo and Voilet or as per the actual evidence and design recorded at required at site- all as per the directions of Engineer Incharge.- Complete.

Providing and Painting of Tulip Saplings on the roof (50 tulips/sqm) as required at site as per the directions of Engineer Incharge.- Complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Part-A (Internal Electrification)

Wiring for light/point with 1.5 sq.mm HFFR/FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit(Including cost of steel conduit), with suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (Polycab/Finolex /Salzer/Paramount/Equivalent Make)

Supplying and fixing of Heritage Type One Way 6 Amp 250V AC Switch (Antique Brass/Approved Colour) SSK/Jaquar/Equivalent Make and shall be approved by not less than SDO.

Supplying and fixing of Heritage Type Module Plate/Cover in front of sizes(Antique Brass/Approved Colour) SSK/Jaquar/Equivalent Make and shall be approved by not less than SDO.

Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed steel Conduit (Including cost of steel conduit) (Polycab/Finolex /Salzer/Paramount Make)

Supplying and fixing of Heritage Type Module 16Amp Switch with 3-Pin 16 Amp Socket(Antique Brass/Approved Colour) SSK/Jaquar/Equivalent Make and shall be approved by not less than SDO.

Supplying and fixing of Heritage Type 2-Module Cover Frame for 16Amp Power Switch & 16 Amp Power Socket (Antique Brass/Approved Colour) SSK/Jaquar/Equivalent Make and shall be approved by not less than SDO.

Supplying and fixing of Heritage Type Indicator (Antique Brass/Approved Colour) SSK/Jaquar/Equivalent Make and shall be approved by not less than SDO.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required, ISO/IEC Certified Havells(Crab-Tree)/ Legrand(Myris)/Anchor Rooma Plus/ Schneider(Livia)/Equivalent Make & shall be approved before execution of work.

Wiring for 6Amp Plug(Computer Point) with (P+N+E) 3 x 2.5 sq.mm FRLS-H PVC Insulated Multi strand Copper Conductor single core cable in surface/Recessed steel Conduit (Including cost of steel conduit) (Polycab/Finolex/Salzer/Paramount Make)

Supplying and fixing of Heritage Type Module One Way 6 Amp 250V AC Switch & Universal 6-13 Amp Socket 250V AC (Antique Brass/Approved Colour) SSK/Jaquar/Equivalent Make and shall be approved by not less than SDO.

Supplying and fixing of Heritage Type 2-Module Cover Frame for 16Amp Power Switch & 16 Amp Power Socket(Antique Brass/Approved Colour) SSK/Jaquar/Equivalent Make and shall be approved by not less than SDO.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including proving and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings), ISO/IEC Certified Havells(Crab-Tree)/ Legrand(Myris)/Anchor Rooma Plus/ Schneider(Livia)/Equivalent Make & shall be approved before execution of work.

Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/Recessed medium class steel conduit (Havells/Polycab/Salzer/Anchor Make) & shall be approved before execution of work.

2 X 10 sq. mm + 1 X 6 sq. mm (P+N+E) for Heating Sub main in One run

2x6 sq.mm+ 1x6 sq.mm (P+N+E) for Lighting/Inverter/AC Sub main in One run

2x2.5 sq.mm+ 1x2.5 sq.mm (P+N+E) for Lighting/Inverter Circuit in One run

Supplying and fixing of Heritage Type Module Dummy Switch (Antique Brass/Approved Colour) SSK/Jaquar/Equivalent Make and shall be approved by not less than SDO.

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value. Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job.

Supply/Installation/Testing and Commissioning of 12/15W + LED Recess Mounted Panel light(Warm Type) luminary fitting round shape with minimum system lumen efficacy of 100-120 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.The Input voltage range shall be 240V to 270V .The Fixture should have In-built Surge Protection of 2kV.Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India authorised lab.The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years,which includes replacement of fixtures of Philips/Wipro/LT Make & Shall be approved not less than by SDO.

Supply/Installation/Testing and Commissioning of Ornamental , wall-mounted type, crafted from cast aluminum with a total height ranging from 440 mm to 550 mm. It shall include a suitable adaptor for secure wall installation, as illustrated in the enclosed drawing or image.The fixture shall feature a combination of cast and spun aluminum components, seamlessly welded and adorned with decorative cast aluminum elements to enhance its aesthetic appeal. It shall be specifically designed to provide adequate illumination for indoor spaces.The luminaire shall be equipped with an extra-clear, transparent, and unbreakable polycarbonate diffuser. It shall conform to relevant IS standards and be fitted with a lamp holder—either screw type or B22—suitable for accommodating an LED bulb rated between 15W and 25W. The fixture shall be finished in antique brown or any other color & Shall be approved not less than SDO.

Providing & Fixing of IK08 IP-66 protected high power LED 50 Watt flood light system(Warm Type) with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=135 Im/wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR:-High Power LED Flood Light Minimum lumen output 6200 Im of Crompton/Jaquar/Wipro/Equivalent Make as approved and to be installed on outside block including S/F of suitable size of Gyser bolt.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department.

Supply/Installation/Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified.

Supply/Installation/Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G,acetylene and electrical fires.

Supply/Laying of 25/32mm Dia PVC Conduit of Anchor/Ravinder/Polypack/Finolex/Equivalent Make along with other accessories like bends,etc complete.

Providing and fixing of bakelite hylam sheets of required size including cutting, filing with S/F screws etc.

Supply/ installation/testing and commissioning of CPRI Approved outdoor Slopped Roof panel Wall / floor mounted with Four Legs) compartmentalized , 415/240 volts TPN/DP/SP MCB Mian Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices Incoming/Outgoing (1) 63 Amps TPN MCB (10 KA) of Legrand / Siemens/ ABB /Schinder /L&T make = 06No. for Sub main control (2) 32-40 Amps DP MCB (10 KA) of Legrand / Siemens/ ABB /Schinder /L&T make = 08 No. & 32-40 Amps DP RCBO of rated mA of Legrand / Siemens/ ABB /Schinder /L&T make = 06 No.for Sub main control (3) 6-10Amps SP MCB (10 KA) of Legrand / Siemens/ ABB /Schinder /L&T make = 25 No for Lighting Control Digital VoltMeter =1 no, Didital Ammeter = 1 no , CT coils for Am meter 300 /5A = 1 set ,phase indicators =1set The Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to approved by Engineer Incharge before manufacturing

Design/Supply/ installation/testing and commissioning of CPRI Approved panel Wall / floor mounted) compartmentalized , 415 volts TPN MCCB Mian Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices (1) Normal Incoming 200 Amp TPN MCCB with breaking capacity of 50 KA withwith extended terminals (Fixed Thermal & Fixed Magnetic) of Legrand/Siemens/ ABB//LK make = 1No. 400 Amp TPN Bus bar Al Strips = 1 Set Digital VoltMeter =1 no, Didital Ammeter = 1 no , CT coils for Am meter 300 /5A = 1 set ,phase indicators =1set (2) Generator Incomer 100 Amp Four Pole Change over switch of Havels / Siemens/ ABB /Schinder /L&T make = 1 no., 200 Amp TPN Bus bar Al Strips = 1 Set ,Volt meter =1 no, Ammeter = 1 no , CT coils for Am meter 300 /5A = 1 set ,phase indicators =1set (3) Invertor /Solar Incomer 40 Amp Double Pole MCB (10 KA) of Legrand / Siemens/ ABB /Schinder /L&T make = 3 No.,100 Amp TPN Bus bar Al Strips = 1 Set & Phase indicators =1set (3) Rotatry Bypass Changeover Switch 3-Phase, Four Pole 200 Amp,415V Ac,50Hz Bypass Changeover Switch Legrand/Seimens/L &T/ABB Make Outgoing (1) 63 Amps TPN MCB (10 KA) of Legrand / Siemens/ ABB /Schinder /L&T make = 06 No for normal heating sub main (2) 40 Amps DP MCB (10 KA) of Legrand / Siemens/ ABB /Schinder /L&T make = 06No for Sub main lighting/AC (3) 32 Amps DP MCB (10 KA) of Legrand / Siemens/ ABB /Schinder /L&T make = 06 No for Sub main invertor The Panel manufacturing unit should be CPRI Registered and the Contractor has to submit the test certificate of main switch gear and Drawing of panel (Showing claerly dimensions of panel with spacing of switchgear as per IE Standards) is to approved by Engineer Incharge before manufacturing

Wiring for Light point with (P+N+E) 3x1.5 sq.mm HFFR/FRLS-H PVC insulated Multi strand Copper conductor single core cable (Paramount/Polycab/Anchor/Salzer/Finolex Make) in existing surface/recessed Conduits (excluding Cost of Conduit) laid in slabs with 01 No.of 6 Amp Modular Switch,Modular Plate,Cover in front & suitable GI box etc ISO/IEC Certified Havells(Crab-Tree)/ Legrand(Myris)/Anchor Rooma Plus/ Schneider(Livia)/Equivalent Make & shall be approved before execution of work.

Supply/Installation/Testing & Commissioning of 12.5KVA/120V Digital Inverter Pure Sinewave Solar Inverter With ISOT Technology, Intelligent Load Sharing & BIS Certified with technical specifications of:- Rating =12.5KVA (i). Advanced Battery Management (ABM) for Battery life and Quick Charging (ii). Micro processer based PWM Technology using HI-Grade IGBT (iii). LED &LCD Display Indications (iv). Best Suited for most High Capacity Sophisticated Applications, (v). Generator Compatible (vi). Inbuilt Time Delay Relay (TDR) EXIDE/AMRON/Luminous Make with 2 Years Warranty

Supply/Installation/Testing/Commissioning of 200Ah,12V Tubular battery of EXIDE/AMRON/ Luminous Make (with 36 Months Warranty)

Supply/Installation of Battery Trolley dully fabricated of 40x40x5mm ANGLE IRON for accommodating &resting of 10 No.tublar Batteries & for Inverter resting complete

Supply/Laying/Connecting and Commissioning of 50 sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of KEI/Polycab/RR Kabel/Paramount Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench(If required).

Design,Supply, Installation, Testing and Commissioning of CPRI Approved (IS/IEC:61439) Main LT Control Double Door panel Slopped Roof fabricated of 16 gauge sheet steel,the panel should have standing dust & vermin proof with gasket lockable door of 16 gauge sheet steel. The Panel should be painted with Electro static powder coated colour, Siemens grey structural with proper chemical pre-treatment with film thickness 35-40 Microns,duly fitted with Voltmeter, R/Y/B Phase-indicators etc & angle iron 50x50x6mm stand painted in black colour of 2.5 feet height/ground clearance properly grouted in cement concrete of 1:2:4 ratio-filter with baby insulators/glands/thimbles suitable for use at 415 Volts 3 Phase,4 wire 50Hz system complete in all respects complete in all respects with following:- Incoming: 200 Amp-4 pole,36kA MCCB with extended terminals Adjustable Thermal & Fixed Magnetic L&T/ABB/Legrand/Simens Make. Outgoing: 400 Amp Suitable Al. Bus bar (for 50 sq.mm 3.5-Core Cable)

Supply/Laying/Connecting of 20mm Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job.

Part-B (Chandelier Type Lighting/LED Strip Illumination)

Supply/Installation/Testing and Commissioning of Centaurus Chandeiler(Tiered Candle Chandelier) with Asfour Almaaza of bearing model No. Gold: DTD-GLD-ASCEL1771230C/Equivalent with following dimensions of Jaquar/USHA Tisva/Equivalent Make and shall be approved by not less than SDO(As Choice Choosed by Head Committee of Khankah Naqsband Sahib R.A : Color: Gold Material: Zinc alloy with natural jade No. of heads: 15+10+5 Cap type: E14 Wattage: 30 x 4.5 W LED(Warm) Dimension (mm): Ø 1470 x H 1900 Weight (Kg): 160 No. of boxes for one product: 07

Supply/Installation/Testing and Commissioning of Asfour Almaaza Chandeiler(Umbra) of bearing model No. Gold:DMO-GLD-AS9111/Equivalent with following dimensions of Jaquar/USHA Tisva/Equivalent Make and shall be approved by not less than SDO(As Choice Choosed by Head Committee of Khankah Naqsband Sahib R.A : Color: Gold Material: Brass No. of heads: 1 Cap type: E14 Wattage: 1 x 4.5 W LED(Warm) Dimension (mm): Ø 250 x H 260 Weight (Kg): 1.5 No. of boxes for one product: 1

Supply/Installation/Testing and Commissioning of IP-65/68 Homogenous LED Strip (Warm Type) Warm light with following Specifications: Input Wattage: 08-10W / Mtr,Input Voltage: 220 - 240VAC,Input Frequency: 50 Hz, Input Current (Max): 50mA, Power Factor:. > 0.95,Surge Protection:2.5KV, High Voltage Protection:300V,HI-POT:1.5KV,IP Rating:IP 65/68,Working Temperature:-10°C to 50°C, LED:Bridgelux,Lumen Maintenance:70% After 50000 BH,Rated CCT: 3000K, 4000K, 6500K,Rated CRI:> 80,System Efficacy:100lm/W,Housing:Silicon Pipe covers the LED Strip Light of Bajaj/Philips/Wipro/ Jaguar/Equivalent Make & Shall be approved not less than by SDO.

Supply of Adoptor (CV DRIVER LED STRINGS 12 V 2 A IP44) Bajaj/Philips/Wipro/ Jaguar/Equivalent Make & shall be approved,

Part-C (Garden Light with cast iron decorative pole)

LAMP POST(Code-DA-KMC-401-27/Equivalent) Supply, installation and fixing of heritage architectural ornamental decorative cast iron pole having provision to fix decorative Light fixture. Installation of same with foundation bolts of suitable size to grout it into specially designed RCC foundation, as shown in the enclosed drawing. The decorative light fixture shall be fixed on the top of the pole. The details of pole & light are given below: - A. The Pole: The pole with light fixture shall look like as shown in the drawing. It shall have all similar features as shown in the enclosed drawing/picture. The Cast Iron Pole of nearly 2700/3000mm length. The pole has ornamental base (Approx.overall dimension-height 1175 mm, bottom dia 360mm) shall have a provision of inbuilt junction box for fixing MCB’s or cutouts with detachable window cover. The part above ornamental base design consists of decorative chinar leaves bamboo sections of circular shapes in different dimension, is made of cast iron in fine finish. The design of the cast-iron parts is clearly shown in the drawing. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%) B. Light Fixture: The Cast Aluminium Light fittings best suitable for the Lamp Post shall be exactly similar as shown in the enclosed drawing/picture, which is of nearly 360mm width, 820mm height. The fixtures have aluminium casted parts & spinning parts welded with decorative cast aluminium designs for better look. It shall have provision of led bulb of 30watt designed to illuminate large areas with its wide dispersion without affecting the environment. It shall have extra clear transparent acrylic sheet light cover with stainless-steel fastening elements. The fixture having provision to fix complete with required power supply. Mentioned dimensions are proposed dimensions, which may vary with actual measurements (Tolerance of ±5%) C. Finish: Colour specification & finishing process must follow as per the ISI standard. All parts must be clean by SHOT blasting process. Further parts are painted in 4 layer coating(Coating thickness-125 to 150 micron) in which first layer with epoxy primer(to prevent corrosion),second layer with epoxy base colour,than third layer polyurethane (PU) metallic paint (Gold/Green/Copper/Silver) & final layer of polyurethane (PU) lacquer (to prevent ultra violets ray). D. Material Specification: All this above parts made of cast iron castings must be of FG-150 grade as per IS 210 (2009) standard, Hardness must be in range between 130 BHN to180 BHN. Cast iron must have Chemical composition of Carbon -3.0% to 4.0% Silicon- 1.0% to 2.0%, magnesium -0.5% to 0.7%,sulpher -0.02% to 0.04% & phosphorous-0.07% to 0.09% this composition is best suitable for product strength & life.

Providing and Laying RCC Foundation for 2.7/3 Mtr Poles) as pe rawing attach at Table P.4 with Following Procedure & Al as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .(Foundation work to be laid as per drawing)A) Excavation of Pit for Foundation Size upto required depth from Ground level B) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surfacecomplete.C) Providing and laying in position cement concrete of M-10 grade of 75 mm thicknessD) Reinforcement for R.C.C. work with MT bars Including straightening, cutting, bending, placing in position and binding all complete. E) Centring and shuttering including strutting, propping etc. and removal of form work for Footing and F) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe & Foundation Bolt with template as per OEM G) Providing and Laying Reinforce cement Concrete of M-25 grade In Footing and Pedestal including Curing the foundation for 7 days. H) Providing and Fixing Nusing Angle 40 m x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face.

Supply and Installation of 2.7/3 Mtr lamp post (garden lighting pole of cast iron) as per the above mentioned specifications and as per enclosed drawing of Dwarka/Karara Mujasame/Homdec Make & (Shall be approved by Department before Supplying)

Supply, installation, Testing and commissioning of decorative post top light fixture of Dwarka/Karara Mujasame/Homdec Make as per the specifications mentioned above and as per enclosed drawing including led lamp B22 18-30W of Philips/Havells/Halonix/HG Make.

Wiring in 3x1.5 Sq.mm FRLS-H of 2.7/3-Mtr Pole Havells/Salzer/RR-Kabel/Anchor make.

Supply/Fixing/Testing and Commissioning of 6 Amp to 10 Amp Rating ,240v,*C* Curve 10K,SP Miniature Circuit Breaker suitable for inductive load and to be fitted in existing poles Complete with connections.(L&T/Siemens/ Legrand/ABB Make)

Supply/Fixing of 63 Amp 4-Way in and 4-Way out Terminal Block/Connector Bottle/Pin type depending upon site conditions of standard make.

Providing of Pole Earthing Using 20mm G.I solid rod to be inserted in ground included with 20mm wide G.I strip in one run from Top of the earthing rod upto bottom of the pole duly fitted with necessary nut bolts complete job

Supply/Fixing and Crimping of 16/25/35/50 Sq. mm aluminium lugs,cable thimbles at termination of the cables/ends including providing of insulation tapes.

Supply/Laying/Testing and Commissioning of 4-Core 16 mm sq. Al armored XLPE Insulated,PVC cable Havells/Polycab/RR-Kabel/KEI/Paramount Make. Including Supply/Laying of HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (01 Ft below ground level) including excavation and refilling the trench of standard make as approved.The cable shall include end termination lugs with its crimping /taping.