Installation of USS and DG near Sardega gate alongwith proving and fixing Isolation Transformers and laying of optical fibre cables with conduit in all weigh bridges and providing three phase dual power supply through UG CABLE AT GOCP,BA

Amount

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as reqd (Gr.- B).

Supplying and fixing metal box of size 200mm x 250mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.

Supplying & fixing of 3 pin 5/6 amps piano type socket outlet on the existing switch box / cover including connection etc. as reqd.

Supplying & fixing of 5/6 amps piano type switch on the existing switch box / cover including connection etc. as reqd.

Supplying & fixing of 6 pin 15/16 amps piano type socket outlet on the existing switch box / cover including connection etc. as reqd.

Supplying & fixing of 15/16 amps piano type switch on the existing switch box / cover including connection etc. as reqd.

Supplying & fixing of metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as reqd. (for light plugs to be used in non-residential buildings).

Wiring for circuit / sub-main wiring alongwith earth wire with following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd. (i) 2 x 2.5 sq.mm.+1 x 2.5 sq.mm. earth wire

Wiring for circuit / sub-main wiring alongwith earth wire with following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd. (ii) 2 x 4.0 sq.mm.+1 x 4.0 sq.mm. earth wire

Wiring for circuit / sub-main wiring alongwith earth wire with following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as reqd. (iii) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying, installing, testing and commissioning of 63 A TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.

Supplying and fixing of 8-way, Double Door SPN, 240 V, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supplying and fixing of 4-way (4 + 12), TPN, 415V, horizontal type three pole and neutral, sheet steel, MOB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required:(i) Single pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required:(ii) Single pole and Neutral

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required:(iii) Triple pole and neutral

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing double pole, (single phase and neutral), 240 V, 25 A, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying, installing on wall, testing and commissioning of 200 A (S.C. rating for 1 sec- 15 kA) rising mains made of 1.6mm thick IP 42 sheet steel enclosure duly painted with powder coating, wall straps, fully PVC insulated 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating in convenient sections and suitable for 415 volts, 3 phase, 4 wire, 50 Hz, A.C. supply with extension joints, fire proof barriers, expansion joints, thrust pads including jointing, and earthing with 2 runs of galvanised iron strips etc. as required. (Rising mains confirming to IS 8623, TEC 439).

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing 50 mm dia X 3.2 metres G.I. pipe (including accessories) complete with 50 mm X 50 mm X 6 mm angle iron bracket on wall and 75 mm X 90 mm shackle insulator with straps for house service connection including painting the angle and flat iron with primer and finish paint etc. as required.

Providing of wall mounted LED batten Tube Light 22 W with polycarbonate housing & integrated electronic driver.

Providing and fixing of wall mounted fans, 450 mm dia.

Supplying and making end termination with brass compression gland and aluminium lugs for 4 X 10 sq. mm (25mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and fixing of 25 mm dia medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. (2 run of cable).

Providing and fixing 250 A, 415 V AC rating and breaking capacity 36 KA MCCB with thermomagnetic release (overcurrent and short circuit protection) and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Providing and fixing of change over switch disconnector in sheet enclosure, 4 Pole, 250 A, 415 V AC.

Providing and fixing of Empty plastic enclosure, 3 way.

Providing and fixing of LED indicator (RED, YELLOW, BLUE).

Providing and fixing of Isolation Transformer, 5 KVA, 220V/220V.

Providing and fixing Bakelite Hylam Sheet 12 mm thick (1 m X 1 m).

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.(i) 63A TP&N

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.(ii) 100A TP&N

Providing of 1.1 KV grade, 4 core, 35 sq mm, Aluminium Armoured Cable.

Providing of 1.1 KV grade, 4 core, 16 sq mm, Aluminium Armoured Cable.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade upto 35 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

ASHISH KUMAR AGRAWAL (BID ID -1099276)

A A ZILKAR (BID ID -1102057)