Fire Fighting System to be Installed at Agriculutre office Building (Krishi Bhawan) at Ambala City in Ambala District

Amount

(A) FIRE HYDRANT SYSTEM Supply, Installation, Testing & Commissioning of mild steel pipe ( IS :1239 Part-1 ) C class heavy class including cutting ,threading , welding etc bends , elbows ,reducers ,clamps , hangers etc . including cutting holes in brick or RCC walls / slabs and making good the same complete including the cost of structural work for supports fabricated from standard sections of required sizes and thickness e.g. galvanized M .S rods , angles channels , slotted angle , etc , cutting to sizes , drilling welding fixing to insert plates , including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade including all steel work NOTE : Pipes up to 50 mm dia shall be threaded joints ,above 50 mm shall be welded joints make hisar jindal ,tata, parkashsurya 250 mm dia (MINIMUM 6 MM THICKHNESS)

200 mm dia ( MINIMUM 6 MM THICKHNESS )

150 mm dia

80 mm dia

25 mm dia

SITC two coat of 4 mm thick 'PYPKOTE' antirust protection including primer and lap of 25 mm on M.S. pipe in trenches or complete including surface preparation coating and wrapping shall be confirm to ISI 10221. MAKEPYPECOAT/COALTEK 150 mm dia (MINIMUM 6 MM THIKNESS)

SITC OF S.S. single headed ISI marked oblique pattern hydrant landing valves with 80mm dia flanged inlet & 63 mm dia female outlet complete with gun metal cap and GI chain twist release type plugh and all accessories as per IS : 5290-1983 Type A (For internal + external hydrant).(MAKE: FIRE CUT /NEW AGE / KARTAR/ MINIMAX / SAFEX)

SITC of INTERNAL OR EXTERNAL weather proof standard fire hose cabinet (750 mm x 600 mm x 250 mm deep) for yard hydrants made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish with " Fire Hose" marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe & nozzle spanner. (For external hydrant system) (MAKE: G.TECH / FIRE CUT / MINIMAX / NEW AGE/ SUPEREX / KARTAR)

SITC of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with S.S. male & female instantaneous type coupling (IS 903) (For internal hydrant system) (MAKE: / FIRE CUT /NEWAGE/ / MINIMAX/,KARTAR/ SAFEX

SITC OF 63 mm dia S.S Metal branch pipe with 12. mm nozzle confirming to IS 903.(MAKE: / FIRE CUT /NEW AGE/ KARTAR / MINIMAX / SAFEX)

SITC of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 30 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 884 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Rate shall include 25 mm dia M.S. pipe connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required. (For internal hydrant system) ((MAKE: FIRE CUT / NEW AGE/ FIRE CUT / G TECH / MINIMAX / KARTAR/ SAFEX)

SITC OF ci+ gunmetal 4 way fire bridge connection with 150 mm butterfly valve 150mm non retrun valve and half encg gunmetal Valve & i/c 18 SWG panited M S Box 30x20x10 with MS framed front with glass panel and words” FIRE BRIDGE INLT”painted in bold letter written on it in red colour as required. Make Minimax, FIRE CUT,KARTAR , NEW AGE, G TECH / SAFEX .

SITC of 250 mm dia 6.35 mm thick flanged end basket 300mm height of Y-type strainer made from MS body with bottom and top removable flanges with nuts, bolts etc having filteration area at least 6 times the cross sectional area of the pipe. MAKE-KARTAR/LEADER,NEW AGE, SANT

SITC OF Air vessel 250 dia x 1000 mm height with dish top made in 6mm thick ms pipe complete with 20mm dia brass air valve , 200mm dia stop valve , pressure gauge ,stop cock, nipple for terrace MAKE FIRE CUT / HYDROTECH.

SITC OF Providing & Fixing of air vessel 450/1600 0mm dia, height with dish top made in 6mm thick ms pipe complete with 20mm dia brass air valve , 200mm dia stop valve , pressure gauge ,stop cock, nipple for fire control room MAKE FIRE CUT / HYDROTECH.

SITC OF 1"BRASS BALL VALVES WITH CROME PLATED, FULL BORE AND BRASS PARTS CAMPLIT IN ALL MANERS FOR HOSREEL. MAKE-SANT, LEADER, KARTAR / SAFEX OR EQULENT 25 MM

SITC of C.I. Butterfly valve conforming to IS : 13095 with flanges, nuts, bolts and washers complete for following sizes :- [PN 1.6 rating]. MAKE-KARTAR,/ZOLOTO/ CASTLE,KIRLOSKAR, NEW AGE, SANT, NALISA OR EQULENT 250mm dia

150mm dia

100mm dia

80mm dia

SITC OF CAST IRON NRV NON RETURN VALVE pn 1.6 WITH NUT BOLT AND FLINGES CAMPLETE IN ALL SENSE (CASTEL ,ZOLOTO ,KARTAR , SANT NEW AGE , NALISA OR EQUILENT) 250mm dia

150mm dia

100mm dia

SITC of Pressure switch of approved make for Hydrant pump, jockey pump and Diesel Engine Driven pump including necessary wiring and cut off valve up to central panel & other material as described in specifications. MAKE -INDOFUS/DANFOS/SWITZER)

SITC of fire brigade draw off connection confirming to IS : 4038-1986 with 150 mm Non return valve/ strainer including necessary fittings the word FIRE BRIGADE DRAW OFF to be painted on the box complete all as specified and directed.(MAKE: FIRECUT/KARTAR/ NEW AGE / MINIMAX)

Providing, fixing, testing & commissioning of 100 mm dia Burden type, dial type pressure gauge (in Pump Room) including brass isolation valve and pipe having caliberation of 0-15 Kg/cm2. MAKE H.GURU/FIEBIG

(B) MECHANICAL/ELECTRICAL PUMPS-Fire Hydrants Diesel Engine Driven Fire Pump [Stand by pump] (Location - Plant Room :)SITC of Local fire authority approved Diesel Engine driven Pump suitable for automatic operation as per discharge defined below consisting of the following details given as A, B, C, D, E and F . MAKE KILOSKER , LUBI ,MOTHER AND PLATT , ASHOK LEYLAND (A) Horizontal Single / Multi stage Centrifugal End suction, back pull type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, Butterfly valve on the suction side ( all items to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump (B) Material of construction : Pump Casing - Cast Iron, Impellor -Bronze, Shaft - SS 410, Packing - Mechanical Seal (C) Pump shall be capable of furnishing not less than 150 % of rated capacity at a head not less than 65 % of the rated head. The shut off head shall not exceed 120 % of rated head (D) Radiator cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1500 / 1800 RPM, Head 56 mtr flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump, Anti vibration damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically if the Normal electrical supply fails with a unit of battery bank of 12/24v,180 Ah, Lead Acid Battery with Boost / Trickle charger as required for operation of Diesel engine, Exhaust Pipe of suitable diameter minimum 10 M length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumping set, (F) Suitable cement concrete foundation duly plastered with anti vibration pads.Rate shall also include Exhaust pipe of required length and size of discharge exhaust gases externally, with muffler, day oil tank of 100 ltr. Capacity with first charge & hand pump set, suitable – cement concrete Pump foundation of 1:2:4 ratio (1 cement : 2 fine aggregate : 4 coarse aggregate) Including foundation bolts, washers as required fuel tank shall be of 2mm thick sheet, factory made, and shall have indications for low fuel switch, fuel level indicator, Shut off Nozzle & Audible Alram in Engine Panel complete. Make Kirloskar. 1620 LPM suitable for 56 Mtr Head, single stage, 1800 RPM- (3R1040/43BHP)

SITC Electric Motor Driven Pump (Location - PUMP Room) MAKE KILOSKER, LUBI, MOTHER AND PLANT of Main driven Pump suitable for automatic operation as per discharge defined below consisting of the following. (A) Horizontal Single stage monoblock, back pull type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, Butterfly valve on the suction side (all items to be matching with the suction side dia of the pump) and pressure gauge ,Butterfly valve and non return valve on the delivery side side ( all items to be matching with the delivery side dia of the pump) and including bypass arrangement for Testing of pump, anti vibration pads, Expansion joints etc. 1620 LPM suitable for 56 Mtr Head, single stage, 2900 RPM HP for HYDRENT SYSTEM.

SITC of Local fire authority approved Horizontal single stage Jockey pump with CI Body, Bronze impellor, SS shaft, mechanical seal coupled with Squirrel cage induction motor for automatic operation suitable for three phase, 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM , 7..5 HP,56 MTR HEAD,,T.E.F.C type confirming to IP:55 with flexible coupling and coupling guard with the pump ,Common bed plate fabricated from mild steel channel , Suitable cement concrete foundation duly plastered with anti vibration pads. 180 LPM suitable for 56 Mtr, 7.5 HP

SITC Of Electric Driven Fire (terrace) pump of capacity 450 LPM 35 mtr . head with TEFC motor 2900 R.P.M 7.5 HP complete with coupling guard , base plate , SS SHAFET ,BRONZE IMPALLER anti vibration pad , foundation etc .MAKE- Mather & Platt , Kirloskar,

Supply of following sizes of XLPE insulated PVC sheathed armoured aluminium conductor and copper conductor cable of 1.1 KV 1100 grade as required. (MAKE:RR/FINOLEX/polycab) 3.CORE x 95 sq. mm (From Fire Fighting Control Panel to main fire AND SPRINKLAR pump)

3 CORE x 35 sq. mm (From Fire Fighting panel to jockey pump)

2 core x 1.5 sq .mm For pressure switch to fire panel )

3 core x 10 sq mm for terrace pump

Supply, installation, testing and commissioning of Installation Control Valve with Gong Bell Unit 150 mm with tapping, pipes Valves, interconnecting hoses and pipings complete as required to make it operational. MAKE - HD, OMEX , GETECH , NEWAGE

SITC OF DOL type fire pump panel suitable for 415 V+/-6 volts, panel shall be free standing floor mounting sheet metal enclosed dust and verming proof. Panel shall be provided with heat shrinkable sleeves and shall be colour coded. The panel shall be suitable for cable entry from top or bottom. The minimum fault rupturing for all incoming and outgoing switch/ breakers shall be 35 KA. The panel shall be fabricated. Auto mannual Starters with change over system. MAKE (FIRE CUT,HYDROTECH)

(C) AUTO GLOW EXIT SIGNS AUTO GLOW EXIT SIGNS SIZE 12 "x 6", MAKE FIRE CUT AND ATTACK FIRE, DP

(D) FIRE EXTINGUISHERS SUPPLY AND INSTALLATION of ISI marked (ISI MARK 15683) portable Co2 fire extinguisher of capacity 4.5 kg flat base including valve, discharge one metar long hose of . meter complete in all respect with explosive certificate .(MAKE: Ceasefire/FIRE CUT / Minimax, safex / kanax

SITC of ISI marked (IS: 15683) portable ABC multipurpose filled by 90% (MAP ) mono amonioum phosphate powder , nitrogen pressurised type fire extinguisher, Capacity 6 kg with 90% map complete in all resp. MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX,)

SITC of Clean Agent type ISI mark IS code 15683 2006 Fire Extinguisher capacity: 2 kg MAKE (MAKE (ATTACK FIRE ,,CEASE FIRE ,MINI MAX ,SAFEX , KANEX,)

SITC of 5 kg modular type self operated on 68o temperature Clean Agent type CE certified Fire Extinguisher filled with NAFPIV clean agent gas MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX,)

SITC of 50 KG DCP (Dry Chemical Powder) Trolley type fire extinguisher as per IS 16018I jet length minimum 8 mtr minimum discharge time 40-50 sec, tested on 30 kgf/cm2 MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX

SITC of 50 KG Mechanical Foam AFFF Trolley type fire extinguisher as per IS 16018 jet length minimum 10 mtr minimum discharge time 60-180 sec, tested on 35 kgf/cm2 with 2 kg co2 external fire extinguisher MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX,)

SITC of 9 ltr capacity Fire Bucket made in 16 guage MS filled by 9 kg sand with MS angle stand having arrangement of hanging 6 buckets with shed MAKE (FIRE CUT ,KARTAR)

(E) FIRE CHECK DOOR SITC OF 46 mm steel fire check door of 120 minut fire rating confirming to bs 476 part -22 and is 3614 part-11 fabricated with 2 no , 1mm thick galvnized steel sheet sandwiching with proprietary fire resistant insulation materials in between . The door frames are manufactured from 1.5mm thick galvanized steel sheet pressed from to double rebate profile of size 143mm x 57 mm . the door frame and door shutters to finish with powder coatingSITC OF 2HR FIRE RATED METAL DOOR MAKE LAKSHITA FIRE ,INDIAN FIRE , FIRE CUT

Providing and Fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers flages for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. (HSR 30.119). 5000 Ltr. capacity

S.S. CONSULTANTS