GENERAL-MP-Garden Maintenance-2024-25- Beautification and renovation of culvert across RBMC at Ch.0/300 km inside the Malampuzha Garden- -General Civil Work

Amount

milma 0/300

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.9.2:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

OD31963/2024-2025:Supplying 18 mm Marine ply pieces IS 710-210 GRADE ,both sides laminated with mica including all charges of material, labour, cutting, fabricating, lipping, edge banding, conveyance, fixing wherever necessary as directed by engineer in charge etc complete.

OD32104/2024-2025:Supplying 18 mm Marine ply pieces IS 710-210 GRADE ,One side laminated with mica including all charges of material, labour, cutting, fabricating, lipping, edge banding, conveyance, fixing wherever necessary as directed by engineer in charge etc complete.

OD32128/2024-2025:Supplying 12 mm Marine ply pieces IS 710-210 GRADE ,both sides laminated with mica including all charges of material, labour, cutting, fabricating, lipping, edge banding, conveyance, fixing wherever necessary as directed by engineer in charge etc complete.

OD32129/2024-2025:Supplying 6 mm Marine ply pieces IS 710-210 GRADE ,both sides laminated with mica including all charges of material, labour, cutting, fabricating, lipping, edge banding, conveyance, fixing wherever necessary as directed by engineer in charge etc complete.

OD32131/2024-2025:Supplying and fixing 45 cm long or nearest size Stainless Steel drawer slide for providing sliding facility to cash drawers etc wherever necessary as per directions of engineer in charge , inclusive of all cost of labor charges etc complete

9.81.2:Providing and fixing bright finished brass handles with screws etc. complete:100 mm

OD32132/2024-2025:Supplying and fixing lock for providing locking facility to cash drawers etc wherever necessary as per directions of engineer in charge , inclusive of all cost of labor charges etc complete

9.84:Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

OD32478/2024-2025:Engaging Man Mazdoor to execute various works as per the direction of department officers at site

AJAYAN M (BID ID -2100191)

Bidder Name

UNNI M

AJAYAN M