Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹17.2 L+₹2.6 L (18.2%)Not Admitted-Fee/PreQual/Technical VILLAGE MANAL P O KANDO BHATNOL TEHSIL SHILLAI DISTRICT SIRMOUR H P | KANDO BHATNOL | SIRMOUR | HIMACHAL PRADESH | 173027 | L2 | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 3 | L3₹18.5 L+₹3.9 L (27.0%)Rejected-AOC R O VILLAGE SAYANH P O LOHARA TEHSIL BATH DISTT MANDI H P | MANDI | HIMACHAL PRADESH | 175001 | L3 | Rejected-AOC L3 | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 5 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹9.7 L
EMD Value
₹19,420
Closing Date
17 Aug 2020, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Shillai Tehsil Shillai
Stock Sorage SH CO Laboratory and Computer Room for Jal Shakti Division Shillai Tehsil Shillai Distt Sirmour HP
2020_HPIPH_39711_1
SHL-SMR03-780 NIT No. 2434-83 Dated 06.08.2020
Open Tender
Civil Works
Item Rate
180 days
Shillai
Please refer to tender document
7 documents required · 7 mandatory
₹250
Yes
EE Shillai
₹19,420
Yes
25 May 2021
11 Aug 2020
18 Aug 2020
11 Aug 2020
17 Aug 2020
11 Aug 2020
11 Aug 2020 - 17 Aug 2020
Amount
Excavation in earth work in all kind of soil stacking excavated soil in the plinth sides of foundation and then disposing of all surplus soil in all leads & lifts as directed by Engineer in Charge.
P/L CC 1:3:6 1cement: 3 sand: 6 graded aggregates 40mm nominal size curing complete excluding cost of form work infoundation & plinth
Providing & laying CC 1:1.5:3 1cement:2 sand 4 graded aggregates 20mm nominal size curing complete excluding cost of form work & reinforcement for RCC work in:-
foundation footing and bases of columns & like mass concrete.
Column.pillar & post upto floor two level
In suspended floor roofs landing shalves & their support balconies,beams, girders bressumers cantilevers upto floor two level
Stair cases (except spiral stair cases) excluding landing I/c preparation of surfaces
Providing form work with steel plates 3.15mm thick so as to give fair finish I/c centering shuttering propping etc. height of propping below supporting floor to ceiling not exceeding 4mt. Height & removal of same in situ reinforce ment concrete and plain concrete work in :-
Foundation footing bases of columns & mass concrete.
Column.pillar & post upto floor two level square, rectangular& polygonal in plan.
Beams, cantilever Girders& lintals sides&soffits of beams, beams,haunching cantilever girders not exceeding 1mtr. Depth.
Flat surfaces such as soffits of suspended floor roofs landing & like floor etc.,upto 200mm thickness.
Stair cases (except spiral stair cases) excluding landing I/c preparation of surfaces
Providing mild steel/tor steel reinforcement I/c bending binding and placing in position complete
Brick work using common burnt clay building bricks in Cement Mortar 1:4 (1Cement:4Sand) (First Class Bricks).
Super-structure above plinth level upto floor two level (First Class Bricks).
Half Brick masonary using common burnt clay building bricks in Cement Mortar 1:4 (1Cement:4sand) First Class Bricks
Extra for half brick masonry in super-structure above plinth level upto floor two level.
Providing wood work in frames of doors, windows,clearstorey windows and other frames wrought,framed and fixed in position in Ist class Deodar wood as per direction of the Engineer Incharge
Providing and fixing Pannelled and glazed shutters for doors windows and clear storey windows including bright finish black enamel led iron butt hinges with necessary screws 40mm thick: 1st class deodar wood.
20 mm thick cement plaster on rough sides of brick/stone masonery convrete walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth in cm 1:6 (1cement:6sand)
6 mm thick cement plaster in CM 1:3( 1cement 3 sand in roof slabs
Distempering (two coats) with oil bond distemper of approved brand and manufacture and of required shade on undecorated surfaceto give an even shade and including priming coat with distemper after throughly brushing the surface free from mortar dropping and other foreign matters.
Finishing wall with water profing cement paint of approved brand and manufacture and of rerquired shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.
White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil grease & dirt and other foreigm matter
Painting two coats(excluding priming coat) on new wood and wood based surfaces with ready mixed paint brushing to give even shade including cleaning all dirt, dust and other foreign matters white paint
Providing and fixing Brass sliding door bolts withnuts and screws complete 300mmX16mm
Providing and fixing brass tower bolts barrel type with screws etc. complete.
Providing and fixing anodized brass handles with screws etc. complete.
Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia metres bolts, nuts and wooden plug and embedding in cement concrete block 30x10x15cm. 1:3:6( 1cement:3sand:6 graded stone att. 20mm nominal size) within all leads and lifts and as directed by the Engineer-in-charge.
RAGHUBIR SINGH
DEVENDER SINGH
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .