Work of Capacity enhancement 5 MVA To 10 MVA of 33/11 KV Sub-station at Sikanderpur and Jam sub station under the area of EDD- III Ballia on semi-turnkey basis (under Additional Business plan 2024-25)

Shifting,loading ,carriage& unloading of following materials on private truck at store centre Ballia & Un-loading of the same with proper stacking at work site .

Jointing charges of 11 KV “XLPE” C/J kit 3 x 300 indoor/Outdoor type

Providing & Fixing/replace of 6 No 33 KV Copper strip For HT/LT side & 1 No copper flexible bond for LT side For new 10 MVA T/f complete wok in all respect .(Materials provided as per Resspo Norms as per requird, 1 Job= 1 No 10 MVA T/F)

Jumpering of HT/LT side of 10 MVA T/F by double circuit cable leed after providing 12 No required size of alluminium Lug and nut bolt washer complete wok in all respect (Materials provided as per Resspo Norms as per requird, 1 Job= 1 No 10 MVA T/F)

Earthing of 10 MVA T/F (1No Neutral Delta type & 2 No body earthing) as per RESSPO norms

Dismentling of existing Damaged 33 KV isolater & Installation of new 33 KV isolater on erected structure with complete fitting,setting & earthing.

Dismentling of existing Damaged Main Bus Bar & Installation of new Main Bus Bar & erected structure with complete fitting,setting & earthing.

Safe Shifting of existing running condition 5 MVA T/F from Plinth to Onother place by Dismentling of H.T. jumpers, 11 KV C/J kits & different earthings of existing 5 MVA T/F. Drain out of T/F oil After closing valves and opening of radiators and shifting of existing 5 MVA T/F by crane from plinth to required safe place asper construction division & resetting of accessories etc. complete work

Shifting,loading ,carriage& unloading of 10 MVA Power Transformer on private truck at store centre Ballia & Un-loading of the same with proper stacking at work site & safely instalation of 10 MVA T/F at Plinth

Shifting,loading ,carriage& unloading of 11 kv XLPE 3x120 SQ MM, 11 kv XLPE 3x185 SQ MM, 11 kv XLPE 3x300 SQ MM on private truck at store centre Ballia & Un-loading of the same with proper stacking at work site .

Laying of 11 kv XLPE 3x120 SQ MM, 11 kv XLPE 3x185 SQ MM, 11 kv XLPE 3x300 SQ MM cable by digging pit & making trench in Proper size(1.2M depth x1M wide) below ground level by fixing bricks(4½˝)on both side of trench wall and 9˝ brick work at the centre of the trench along the cable.Fixing brick slab on top after filling sand around both the cable including cost of bricks/ HDD Method as per site required.

MILAN CONTRUCTION WORK

PRAVEEN CONSTRUCTION AND SUPPLIER

M/s. Yuwa Shakti Construction