MAINT OF INTERNAL ELECTRIFICATION IN MD/OTM ACCN AT CERTAIN BUILDING OF ALMA LINE HALFMMON LINE MANDIR LINE FITZ LINE S ANDT AREA KV AREA BUTCHERY AREA MH AREA RECORDS AREA JHULA DEVI AREA DKT AREA AND GKHAL AREA OF RANIKHET UNDER GE RANI

Amount

Taking down carefully copper /aluminium point wiring (light,fan,socket or power ) complete fittings such as switches and fixtures ceiling roses, pendants, regulators, sockets, lamp holders, bracket light fittings, bulk heads fittings, tube light fittings etc removing the materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Supply and fixing of point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No.2 above but One light point controlled by two way switch.

All as per item No.2 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.2 above but one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Supply & Fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable ( FRLS) drawn into existing conduit and terminal boxes and matching the existing surface mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated Bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No.7 above but one light point controlled by Two way switch.

All as per item No.7 above but One socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.7 above but One socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 7 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Suppy & Fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing capping of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No.12 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.12above but one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No. 12 above but herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, Two way 6 Amp complete all as specified and directed.

Supply & Fixing socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply & Fixing call bell ding dong AC, 230V single pole complete all as specified and directed,

Supply & Fixing bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fixing High quility LED lighting fixture with co extruded polycarbonate body,complete with retrofit T8 polycarbonate, 20 Watt,white/warm white, internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and fixing High quality LED T5 integrated batten tube light fitting 20 watt ( with inbuild driver ) including connection with wire of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply & Fixing in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing in repair MCB single pole and neutral, 240 volts, 25 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing in repair MCB Four pole ,415 volts, 63 to 100 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing in repair sheet metal enclosure for DBs (double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing in repair sheet metal enclosure for DBs (double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing in repair sheet metal enclosure for DBs (double door type) Triple pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 4Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, , 25 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 4 sqmm, one run of 4 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, , 25 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 6 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Material and labour for Sub main wiring with 2 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, , 25 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 10 sqmm, one run of 10 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Taking out old unserviceable service connection cable for replacement including Supply & Fixing service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

Supply and fixing High quility LED lighting fixture with co extruded polycarbonate body, complete with polycarbonate tube, 5 Watt, white/ warm white suitable for mirror light internally pre wired of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and fixing high quality indoor LED PLL base lamp 4 pin, 18 Watt (with inbuiled driver) complete all as specified and directed.

Supply & Fixing Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories including, cutting, opening through bricks/ stone wall for fixing in openings , grounting of suitable size of nuts & bolts for exhaust fan and making good distrubed surface , connecting flexible cable wire from ceiling rose to exhaust fan complete all as specified and directed .

Taking down for Repair of Exhaust fan of size 250 mm to 450 mm sweep of any type including replacement of burned copper winding, bearing and any other accessories and refixing after repair with suitable size nut bolts and wire complete all as specified and directed.

Supply and fix in replacement High quality LED T8 tube rod 20 Watt white/ warm white (with inbuild driver) with single side connection including connection with wire of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and Fixing Plug TOP 16 Amp 3 Pin complete all as specified and directed.

Supply and Fixing in repair switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing in repair socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply & Fixing in repair switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing in repair socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing in repair lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply & Fixing Modular switch 1 way 6 Amp, 1 module complete all as specified and directed.

Supply & Fixing Modular switch 1 way 16 Amp, 1 module complete all as specified and directed.

Supply & Fixing Modular socket outlet 6Amp, 2/3 pin combined 2 module complete all as specified and directed.

Supply & Fixing Modular socket outlet 6/16Amp, 2/3 pin combined 2 module complete all as specified and directed.

Supply & Fixing Modular white cover plate with frame, 1 module complete all as specified and directed.

Supply & Fixing Modular white cover plate with frame, 2 module complete all as specified and directed.

Supply & Fixing Modular white cover plate with frame, 3 module complete all as specified and directed.

Supply & Fixing Modular white cover plate with frame, 4 module complete all as specified and directed.

Supply & Fixing Modular white cover plate with frame, 6 module complete all as specified and directed.

Supply & Fixing Modular white cover plate with frame, 8 module complete all as specified and directed.

Supply & Fixing Modular metal flush box 1/2 module complete all as specified and directed.

Supply & Fixing Modular metal flush box 3 module complete all as specified and directed.

Supply & Fixing Modular metal flush box 4 module complete all as specified and directed.

Supply & Fixing Modular metal flush box 6/8 module complete all as specified and directed.

Supply & Fixing in repair electric indication bell with indication lamp board and 10 No.s single bell push switch complete all as specified and directed.

Supply & Fixing Recess mounting LED 1x1 luminaire,18 W, 230 volt, white/warm white suitable for Recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel, fixing upto hight 40 feet and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply & Fixing recess mounting LED 2x2 luminaire,36 W, 230volt, white/ warm white suitable for Recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel, fixing upto hight 40 feet and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Material and labour for repair of voltage stabilizer by replacing time delay relay /main relay unit and after removig the burnt out unserviceable winding cleaning the slots, insulate properly and rewinding transformer including testing of capacity 4/2/1 KVA, single phase, 230 V AC, 50 Hz complete all as specified and directed.

Supply and charge of gas R12/R22 to refrigerator 165 Ltrs to 250 Ltrs after leak testing and rectification of leak complete all as specified and directed.

Material and labour for taking out old unserviceable capillary and stainer from refrigerator and supply and fix new capillary & stainer of any capacity complete all as specified and directed.

Servicing of refrigerator by air blowing, cleaning of condensor coil, rubber bedding & checking and tightning the electrical connection all as directed of capacity 165 to 250 Ltrs complete all as specified and directed.

Supply and fixing of LED Post top 30W with IP 65 protection comprises of Spherical/Diamond shape diffuser cover, etc and all accessories including monkey cage of suitable size for protection of light, light grade GI pipe of suitable length and wire required for connections etc complete all as directed. Make : C&S cat part No CETUS/30W, Philips cat part No SPC TrueForce Post, Crompton cat part No LPTM-40-CDL, Havells cat part No RUBYPT35WLED757PSYMTOPC

Supply & fixing, connecting up, testing and commissioning Bldg Security light luminaires of with 30 W LED lamp suitable for 220-230V,50 Hz, protection class IP 65 with standard fittings/accessories (as applicable to the fitting) and also including provision for fixing by bracket made of 40mm bore light grade GI pipe (or higher size to suit the opening of fitting) 1.5 metre long bent to shape and 40 x 6 mm thick FI clamps, nuts and bolts and connecting up from ceiling rose by means of 3 runs of 1.5 Sq.mm PVC insulated but unsheathed, weather proof, IS-694 marked multistranded copper conductor cable fixed complete all as specified and directed .

Supplying and fixing of LED Flood light fitting not more than rated wattage 155W having System Efficacy >120 lm/W, system output >18500 Lumens, THD <10%, Power Factor >0.95, CRI >70, CCT 5700, Full IP 66 ( with out Glue) protected single piece die cast aluminium housing having toughned glass/PC with Impact resistance IK08. LED driver should be Fully Metal Body Potted & Encapsulated . BIS compliant driver should sustain 440V Stress Voltage protection for 8 Hrs., High Cut off : 325V(+/- 15V) and should have feature of Auto Restart. Driver shall have 4KV Surge protection and feasibility of 10KV external SPD housed in Luminiare. Including suitable size GI pipe bracket clamps, nut, bolts and washers and connecting up with suitable size of copper wire complete all as specified and directed. Make : PHILIPS cat. part no. BVP483 LED185 AWB CW or equivalent cat part in make specified in particular specification. Note: Installation is to be done at 8-9 meter height appx . All T&P and safety measure has to be made accordingly by the contractor. Rate quoted by the contracor shall deemed to included this aspect, nothing extra shall be admissible on this account.

Material and Labour for replacing insulation deteriorated PVC insulated twin core flate 10 Sqmm, 1100 Volts grade heavy duty stranded aluminium, conductor cable in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI wire complete all as specified and as directed.

Material and labour for writings letters or figures ( Block, Roman, Italic or Indian) n exc 30cm high with paint so that they stand out bodly and solidly without showing signs of brush marks at various locations in ranikhet area complete all as specified and as directed.

Supply and fix surface mounted downlight of high quality slim type round surface mounting LED luminaire of die cast aluminium housing with frosted diffuser. Rated watt 12 watt complete all as specified and as directed. of corona series of Make C&S cat part no.-CORONA-RND/12W/W or any equivalent cat part in make specified in particular specifivation.

Supply & Fixing LED bulk head fitting, 1x12 watt with PDC aluminium housing and milky diffuser with all accessories and including connecting up with twin core twisted flexible copper conductor cable suitable size of 230 volts, 50 HZ complete all as specified and directed. Make :- C&S Cat part No LTB12WLED or equivalent cat part in make specified in particular specification.

Supply & Fixing of glow sign board of size minimum 4.5x 1.5m of suitable thickness consisting 3 No LED tube light of min 20watt, 4mm light passing acrylic sheet for LED letters, LOGO and strips ( Box type) to cover day time and night time visibility with colours as directed, acrylic sheet back side including frame work of mild steel angle iron 35x35x6mm, PCC 1:2:4 type B1 work as required at MES installation complete all as specified and directed.

Material & Labour for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

M/S NAYAL ELECTRICALS

aditya construction