Construction of Hostel Block at JLN Govt. Engineering College at Sunder Nagar District Mandi HP SH Providing Compound lighting , MCB DB , Cable and distribution box therein

Amount

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect as per satisfaction of the Engineer in charge. i) Double door-8 way Make: L&T, Schneider, Siemens, ABB, Legrand, C&S, Havell's etc.

Supplying and fixing of following way, sheet steel cable End Box (For mounting on top or bottom of Distribution Box for extra wire & cables), on surface / recess, complete with interconnections , including earthing etc. as required complete in all respect as per satisfaction of the Engineer in charge. Make: L&T, Schneider, Siemens, ABB, Legrand, C&S, Havell's etc.

Double door-8 way

Double door-12 way

Double door-16 way

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages , electrical connections, safety valve connections, testing and commissioning etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) 25 liter capacity water heater (cat-A) (Make : Racold / Venus / Crompton Grieves /Usha.)

Supplying and fixing of following way SEGREGATED, triple pole and neutral, IP-43 Double door sheet steel MCB distribution board, 415 volts, on surface / recess, with provision to mount 4 module MCCB incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) 6-way, MCCB+12+18 DD Make: L&T, Schneider, Siemens, ABB, Legrand, C&S etc.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. i) Triple pole & Neutral. Cat-A. Make: L&T, Schneider, Siemens, ABB, Legrand, C&S, Havell's etc.

Supplying and erection of cast Iron base with galvanised steel tube pole of suitable length.The pole made out of cast Iron with Galvanised steel tube pole finish with polyster with base plate 220*220.The poles to be primer coated and painted with polyster /black paint/gray/PU painted black.Brackets are made out of Mild steel & Aluminium and suitable for heavy duty ornamenal poles.The pole provided with a service window at bottom profile comprising 4-way 25 Amp connector terminals and a MCB etc.The pole to be mounted on a 1:2:4 cement concrete base (pedestal) of 450*450 mm and 450 mm.L-type foundations bolts 4*16 mm dia with nuts,templates and all complete as per approved drawings .Foundation RCC 1:2:4 shall be of size 450*450 mm and depth 900mm c/c as per approved drawings.The foundation shall extend above sorrounding ground/driveway level for 200mm and have slant 63mm dia PVC sleeve cast insitu foundation for cable entry as per the drawing , complete in all respects as required :-Make (Twinkle Delta-E cast Iron) or at par in Bajaj,K-lite, luxmax,or any other make approved by Engineer-in-charge .

Galvanised steel pole with cast iron (Single Bracket ) overall length 4 meter .

Galvanised steel pole with cast iron (Double Bracket ) overall length 4 meter .

Supplying and fixing of LED hanging fixture 80w ,spun Aluminium powder coated top and die cast aluminium base power LED are directly mounted on inbuilt heat sinks with prismatic diffuser complete with all accessories including making connections testing etc as required. Make:-(Twinkle cat no LUX-PT-166H) or at par in bajaj ,syska,philips or any other make approved by Engineer-in-charge .

Providing and laying of one No aluminium conductor PVC insulated and PVC sheathed armoured/XLPE power cable working voltage 1100 volts grade direct in ground, to be laid 1 meter below the ground level including excavation sand cushioning protective covering and refilling the trench etc of the following size complete in all respect as per entire satisfaction of Engineer- in- Charge.

Aluminium Armoured cable 2*6 sqmm

Aluminium Armoured cable 3.5*300 sqmm

Aluminium Armoured cable 3.5*95 sqmm

Supplying and Laying of double wall corrugated (DWC) HDPE pipes for underground power/communication/OFC cables; Protection with IS 14930 part II mark on it ,as required complete in all respects in the existing trench at site.Make: Telerex,D-Rex,Sriram,Duraline etc.

SIZE OD/ID 63/50 (2")

SIZE OD/ID 90/76 (3")

SIZE OD/ID 120/103 (4")

SIZE OD/ID 180/152 (6")

Supplying & fixing of following depth sheet metal cubical Pedestal of suitable dimensions with plus minus 5cm variation made from 1.6mm thick sheet steel duly fabricated in a segragated manner for housing of switcggear by welding each compartment on five side & front siged hanged , complete with locking arrangement with sufficient number vertical & horizontal intermediate switchgear housing & having 1 No MCCB 630 amp 4 pole 50KA with spreader terminals as incomer, digital metering set, 600amp 4 strip aluminium busbar, Control wiring ,Phase indicating lamps & 2 No MCCB 250 Amp 4 pole, spreader link,7 Nos 4 pole MCCB 100 Amp & 2 Nos MCBDP 63 Amp on outgoing. Complete with internal solid connections testing & commissioning etc as required complete in all respects .

Supplying & fixing of following depth sheet metal cubical Pedestal of suitable dimensions with plus minus 5cm variation made from 1.6mm thick sheet steel duly fabricated in a segragated manner for housing of switcggear by welding each compartment on five side & front siged hanged,complete with locking arrangement with sufficient number vertical & horizontal intermediate switchgear housing & 1 No 250 Amp 4 Pole 36 KA MCCB with spreader terminals as incomer with phase indicating lamps , Control wiring & 4 strip Aluminium busbar 250 Amp complete with internal connection testing commissioning etc as required complete in all respects.

Supplying & fixing of following depth sheet metal cubical Pedestal of suitable dimensions with plus minus 5cm variation made from 1.6mm thick sheet steel duly fabricated in a segragated manner for housing of switcggear by welding each compartment on five side & front siged hanged , complete with locking arrangement with sufficient number vertical & horizontal intermediate switchgear housing & having 1 No 125 Amp 4 Pole 25 KA MCCB,spreader links as incomer ,Phase indicating lamps,Control wiring & 4 Strip Aluminium Busbar 150 Amp complete with internal connections testing & commissioning as required complete in all respects.

Supplying & fixing of following depth sheet metal cubical Pedestal of suitable dimensions with plus minus 5cm variation made from 1.6mm thick sheet steel duly fabricated in a segragated manner for housing of switcggear by welding each compartment on five side & front siged hanged , complete with locking arrangement with sufficient number vertical & horizontal intermediate switchgear for housing 4 Pole 250 Amp MCCB 36 KA spraeder links ,Phase indicating Lamps, Control wiring etc as required complete in all respects.

Supplying & fixing of following depth sheet metal cubical Pedestal of suitable dimensions with plus minus 5cm variation made from 1.6mm thick sheet steel duly fabricated in a segragated manner for housing of switcggear by welding each compartment on five side & front siged hanged , complete with locking arrangement with sufficient number vertical & horizontal intermediate switchgear housing & having 4 Strip Aluminium Busbar 250 Amp complete with connection etc as required complete in all respects.

Providing and installation of following type of surface mounting slim circular type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.Sensor light 12 watt

Supplying and fixing G I modular Box of 205 mm x135 mmx60mm size with modular plate andcover in recess including providing and fixing 3 Nos 5 pin 5/6 Amps modular socket outlet, 3 Nos 5/6 Amps modular switch, type connections etc. as required complete in all respect. AVEAnchor, Schneider-Lkfuge, Legrand, North-west, ABB,SSK, Gold medal make

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size complete in all respect. i) Armoured cable 630 sqm (3.5 core Makes:kei/polycab/Rrkabel

SHARMA ELECTRICAL CO.

Rohtash Verma

Digvijay Sharma