Construction of equipment building, access road, plumbing sanitary works, bathroom tiling works, landscaping and interior partition works related to new R D Building in KMML

Amount

A. PLUMBING & SANITARY WORKS.

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Demolition of RCC/PCC works

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Supplying and fixing European Closet

17.78 : Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.

Wash basin

17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing urinal

17.23 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Supplying and fixing mirror

17.32.3 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions)

Urinal division with granite slab

od232303/2019_2020 : Providing and fixing Granite slab 20mm thick division plate for urinals edge curved finished of size 50 cm wide and 120 cm long all complete as per the architectural drawings with cement mortar 1:4 and suitable adhesive materials to fix with wal and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.<br><br>

Supplying and fixing towel rail

50.17.1.2 : Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Supplying and fixing floor trap

od232313/2019_2020 : Providing and fixing PVC floor trap 100mm x 75 mm with grating including cutting open, boring through wall, RCC slabs etc complete as directed by engineer-in-charge.

PVC gully trap

od232546/2019_2020 : Supplying and fixing 100 mm PVC gully trap for waste line with cement concrete 1:2:4, 10 cm thick foundation and 1/2 brick wall in cement mortar 1:6 and plastering with cement mortar 1:3, 12 mm thick 2 oats to inside and top providing 1 no of CI grating 150mmx150mm inside and 1 no of 225mmx225mm grating outside painting thr grating with black paint etc. complete using M sand excluding cost of cement which will by supplied free of cost by KMML.

Casting Sewer manholes complete excluding the cost of cement.

19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

110 mm pvc pipe line

50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

PVC pipe line 75 mm dia

50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

110 mm pvc line concealed

50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

75 mm pv pipe

50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2

50 mm pvc pipe

50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2

pvc door bend 110 mm

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

PVC Plain bend

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

PVC door tee 110 mm

50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

PVC door bend 75 mm

50.18.9.21.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend

PVC door tee, 75 mm

50.18.9.21.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee

PVC plain bend 75 mm dia

50.18.9.21.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend

PVC plain tee 50x50x50mm

50.18.9.20.6 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63x63x63 mm dia Door Tee

SS Soap dish

50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Precast ferrocement septic tank for 30 users capacity

od239591/2019_2020 : Providing and fixing ferro cement septic tank for 30 users capacity including earthwork excavation, refilling, providing inlet, outlet etc. complete including cost and conveyance of all materials, labour charges, lead, lift, all taxes, sundries, etc., complete as directed by the Engineer-in-Charge at all levels

Soak pit

19.33 : Constructing soak pit 1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

Earthwork excavation for soak pit and manholes.

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Polyethylene Water tank

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

PVC pipe 32mm dia 10kg/cm2

50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

PC pipe 32mm dia with clamps

50.18.8.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2

PVC pipe 25mm dia 10 kg/cm2

50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

PVC pipe 20 mm dia 10kg/cm2

50.18.8.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2

CP long body bib cock

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

CP brass stop cock 20 mm nominal bore

od239709/2019_2020 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 8931<br>20 mm nominal bore

CP health faucet good quality

50.17.1.4 : Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

CP brass angle valve

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

PVC pipe 32 mm 10kg/cm2

50.18.9.4.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2

Garden brass tap

18.15.1 : Providing and fixing brass bib cock of approved quality :15 mm nominal bore

Valve gunmetal

18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

15 mm nominal bore ball valve

od239807/2019_2020 : Providing and fixing ball valve brass with plastic floats complete 15 mm nominal bore.

Vent cowl

50.18.9.20.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

Floor PCC inside toilets etc complete excluding the cost of cement.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Wall plastering repairing works

od239846/2019_2020 : 12 mm cement plaster finished with a floating coat of neat cement of mix: etc complete but excluding the cost of cement.<br>1:3 ( 1 cement : 3 fine sand)

B. ROAD WORKS

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Soling for road works

od242382/2019_2020 : Soling with soling stone of size 150 to 75 mm broken stone including hand picking and wedging them tightly so that the whole is formed as a solid mass etc complete as per the direction of engineer-in-charge.

PCC for road

od242386/2019_2020 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:Complete but excluding the cost of cement.<br>1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

RCC Road, drainage etc

od242394/2019_2020 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). Cement and steel will be supplied by company.

Steel reinforcement

od242424/2019_2020 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete , Thermo - Mechanically Treated bars of grade Fe-500D or more etc complete with zinc rich primer coating 2 coats after cleaning the steel with wire brush etc... but excluding cost of steel bars .

Centering and shuttering

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

C. TILING AND PAINTING WORKS

11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

od262919/2019_2020 : Protecting the tiled floor surface with 4mm thick layer of Plaster Of Paris over a thick layer of news papers.

Wall tiling works

11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Cement primer on wall, ceiling, landscaping walls

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

Painting on wall, ceiling, landscaping wall.

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

D. LANDSCAPING WORKS

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

Major Tree uprooting

2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

Brickwork for landscaping wall

od242494/2019_2020 : Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand), Cement will be supplied departmentally.

Plastering works

od239846/2019_2020 : 12 mm cement plaster finished with a floating coat of neat cement of mix: etc complete but excluding the cost of cement.<br>1:3 ( 1 cement : 3 fine sand)

Interlock paving

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Excavation for planting

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Providing and planting Royal Palm

od242503/2019_2020 : Providing of Royal palm plant, having ht. 1.80 m to 2.10 m with 8 to 10<br>suckers, well developed, fresh and healthy with lush green foliage in 30 cm<br>size of Earthen pot / Plastic pot.

Providing and landscaping with Korean grass

od242520/2019_2020 : Providing and laying Korean grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

Providing and planting red climbing rose

od242526/2019_2020 : Providing and planting, Displaying of plant Creeper red climbing Rose variety 3 to 4 healthy branch 60 cm and<br>above ht. well developed with one and above flowers , as per direction of<br>the officer-in-charge.

Providing and planting Neem tree

od242529/2019_2020 : Supply and planting Neem plant of height 120-130cm in sice as per direction of the officer-in-charge.

Providing and planting Laxmi tharu

od242534/2019_2020 : Supply and planting Laxmi tharu Plant plant of height 120-130cm as per direction of the officer-in-charge.

Supplying and stacking red earth free of clods, kankar, weeds etc.

od242544/2019_2020 : Supplying and stacking red earth free of weeds, clods, kankar etc.

Supplying cow dung

od242550/2019_2020 : Supplying cow dung

Supplying and stacking river sand

od242551/2019_2020 : Supplying and stacking river sand

Mixing & spreading red earth, cow dung and or river sand.

od242559/2019_2020 : Mixing red earth, cow dung and or river sand in the proportion as instructed by site in charge and spreading, filling in the pits wherever required.

E. INTERIOR PARTITION WORKS

od243768/2019_2020 : Full height partition .<br>Fabricating at site full height partition of width 75mm upto 280cm/ ceiling ht from floor by fixing a frame work using 19mm thick marine plywood sections with grid size within 60cm x 60cm spacing with cutouts for 6mm glass (wherever provided) with Beech wooden frame work paneling in specified sizes as in Drg. Both sides of the wooden frame work is covered using 9mm tk marine plywood / Flexi plywood neatly cut and jointed without gap or overlaps and fixed on to wooden /plywood frame work using steel screws, using laminate and above applied with texture coat upto ceiling height is primered, puttied and painted over using two or more coats of emulsion (roller finish or texture finish + emulsion) on both sides of the cabin where ever specified. A beech wooden skirting is fixed on the bottom as specified earlier. All details are to be done as shown in the drawing with 1mm tk laminates pasted over exposed plywood surfaces. Beech wooden skirting, beading etc are to be provided as per drawing.(cost of texture finish, skirting, polishing etc will be separate items.

Door frames

od243778/2019_2020 : Door frames.<br>Supplying and fixing on to the space/openings marked for doors as specified in the plan using necessary clamps/ Brackets/ screws Beachwood door frames of outer dimension 900mm x 2100mm fixed on the brick wall or gypsum board partitions / plywood partitions using screws/steel frames size of frames shall be 63mm x 75mm with exposed surface given detailing as per drawing. The frames surface abouting walls wall / partition floor shall be neatly primered and coated with anti termite solution before fixing

Aluminium partition work for cupboard

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing multiwood sheet for shelveslass panes

od246267/2019_2020 : Multiwood for fixing in between frame

IPS Flooring

od243873/2019_2020 : 'Providing and laying of Vacuum Dewatered Flooring (IPS flooring) in 50 mm thick cement concrete (I.P.S) 1:1:2 proportion using 12 mm & below size aggregates including formwork wherever necessary, Power floated finished smooth or rough as directed and complete. Rounding off at the junction with in all levels flooring etc. complete as specified and as directed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, etc. complete as per specifications and directions of Engineer-in-charge. Cement will be supplied departmentally.

Applying 2 or more coats of melamin matt finish on wooden works

od244022/2019_2020 : Polishing.<br>Applying two or more coats of melamine matt finish (spray finish)on to all exposed wooden surfaces, beadings, doors, door frames, door panels skirtings, mouldings etc. after applying filler, sealer and finishing surface to a smooth finish.(The edges should be masked with masking tapes ) ( Sample colour and finish should be got approved by Architect.)

Flush Door panels

od246010/2019_2020 : Flush door panels.<br>Fabricating , supplying and fixing at site on to the wooden door frames flush doors to suit frame size of 900mm x 2100mm. The door is made of 25mm thick Marine block board cut to required size and both sides pasted with 3mm thk veneer with grooves as per drawing. Design cuttings are provided in the door to fix etched glass panels of 6mm thk as specified. The exposed edges of the doors are lipped using 6mm tk beech wooden beadings. The doors are fitted with mortice locks of approved brands of satin steel finish and hydraulic door closers and 4 nos S.S hinges of length 100mm (to be approved by Architect). The wooden surfaces are polished with melamine matt.(Cost includes all hardwares and fixing cost.

F DEMOLITION AND PLINTH PROTECTION WORKS

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

PCC/RCC Demolition.

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

Mandays for miscellaneous works.

od246031/2019_2020 : Man days for miscellaneous works

Plinth protection works

od246276/2019_2020 : Providing and laying in position cement concrete of specified grade excluding the cost of cement, centering and shuttering - All work up to plinth level: <br>1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

G. EQUIPMENT ROOM BUILDING

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

PCC 1:4:8 excluding cost of cement.

od246276/2019_2020 : Providing and laying in position cement concrete of specified grade excluding the cost of cement, centering and shuttering - All work up to plinth level: <br>1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

RRM work excluding the cost of cement.

od248146/2019_2020 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:<br>Cement mortar 1:6 (1 cement : 6 coarse sand)

RCC work for plinth belt excluding the cost of cement.

od248156/2019_2020 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of cement, centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.<br>All work upto plinth level

Centering and shuttering for plinth belt and lintel

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

Brick work

od249211/2019_2020 : Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):<br>With F.P.S. ( non modular ) bricks(from floor 2 level up to floor 5 level) etc complete but excluding cost of cement.

RCC work for lintel and roof M25

od242394/2019_2020 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). Cement and steel will be supplied by company.

Centering and shuttering for roof slab

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement works with zinc rich primer 2 coats. Steel will be supplied departmentally

od242424/2019_2020 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete , Thermo - Mechanically Treated bars of grade Fe-500D or more etc complete with zinc rich primer coating 2 coats after cleaning the steel with wire brush etc... but excluding cost of steel bars .

Plastering works

od239846/2019_2020 : 12 mm cement plaster finished with a floating coat of neat cement of mix: etc complete but excluding the cost of cement.<br>1:3 ( 1 cement : 3 fine sand)

Tiling works with skirting

11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

Applying 2 coats of cement primer

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

Painting works

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Aluminium fabrication works for doors and windows frame.

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

Aluminium fabrication works for shutters.

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.1 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 4mm thick glass

9.7.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Float glass panes4 mm thick glass pane

Providing multi wood for door panelling.

od246267/2019_2020 : Multiwood for fixing in between frame

Filling available excavated earth for basement.

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Floor PCC works for machine rooms.

od242386/2019_2020 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:Complete but excluding the cost of cement.<br>1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Bidder Name

BIOHOMES PROJECTS PRIVATE LIMITED