PROCUREMENT OF DEFIBRILLATOR (biphasic, with AED mode) FOR LG GENERAL HOSPITAL

quantum of electrical shocks with facility for monitoring vital parameters.

Operational Requirements

1. Defibrillator should be Bi- Phasic, light weight and latest model

2. Should monitor vital parameters and display them

3. Should print the ECG on thermal recorders.

4. Should work on Manual and Automated external defibrillation (AED) mode.

6. Should be capable of doing synchronized &a synchronizedcardio version

BIDDER MUST HAVE TO SUBMITTED PART-III TECH BID PHYSICALLY IN TENDER ALONG

WITH SIGN AND STAMPED. FAILING IN WHICH, WILL BE STRAIGHTWAY REJECTED.

7. Can be operated from mains as well as battery

8. Should have defibrillator testing facility

Technical Specifications

Should be a Low Energy Biphasic defibrillator monitor with Recorder, having

1. capability to arrest all arrhythmia within a maximum energy of 360 Joules

Energy settings: Should be capable of delivering energy in increments of 1-2

2. joules up to 30J and increments of maximum 50J thereafter.

3. Charge control: Automatic if shock is recommended based on heart rhythm

Should have range of 1-360 joules with charging time of less than 5 seconds

4. for maximum energy.

5. Should have device status indicator for readiness of use

6. Should have facility of manual defibrillation upgradable to external pacing

Should have at least 6 inch high resolution colour monitor for ECG(3 to

7. Leads) with three waveform capability; upgradable to SpO2, NIBP & etCO2

Should monitor ECG through paddles, pads and monitoring electrodes and

8. Defibrillate through pads and paddles.

Should have Automatic Lead switching to see patient ECG through paddles

9. or leads

Should measure and compensate for chest impedance for a range of 25 to

11. Should have a built in 50mm strip printer/ thermal recorder and 3 channel

BIDDER MUST HAVE TO SUBMITTED PART-III TECH BID PHYSICALLY IN TENDER ALONG

WITH SIGN AND STAMPED. FAILING IN WHICH, WILL BE STRAIGHTWAY REJECTED.

ECG recorder

Should have external & internal paddles with paddles contact indicator – for

12. good paddle contact.

13. Single Adult and pediatric paddles should be available.

Should have event summary facility for recording and printing at least

14. events and 50 waveforms.

Should be capable of printing Reports on Event summary, configuration, self-

15. test, battery capacity etc

16. Should have facility for self-test/check before usage and set up function

17. Should have user-friendly color-coded operation

Environmental factors

The unit shall be capable of being stored continuously in ambient

1. temperature of 0 -500C and relative humidity of 15-90%

Shall meet IEC-60601-1-2: 2001(Or Equivalent BIS) General Requirements of

2. Safety for Electromagnetic Compatibility.

Power Supply

Power input to be 120-240VAC, 50/60Hz. Power cable should be fitted with

1. Indian plug and adapter.

2. Resettable over current breaker shall be fitted for protection

Should have a Rechargeable Battery capable of usage for at least 90minutes

OR30 Discharges of 270 joutes with 3 hours of monitoring OR at least

BIDDER MUST HAVE TO SUBMITTED PART-III TECH BID PHYSICALLY IN TENDER ALONG

WITH SIGN AND STAMPED. FAILING IN WHICH, WILL BE STRAIGHTWAY REJECTED.

shockes of 200 joules without monitoring.

Standards, Safety and Training

1. Should be FDA approved product

2. Manufacturer should have ISO certification for quality standards

Electrical safety conforms to standards for electrical safety IEC-60601-1

GeneralRequirements and IEC60601-2-25Safety of Electrocardiograms. (OR

3. EQUIVALENT BIS Standard)Drop Test-Withstands 1 meter drop to any edge,

corner or surface.

Should conform to international test protocols on exposure to shock forces

4. and to vibration forces.

Should meet IEC 529 Level-2 (IP2X) for enclosure protection solid foreign

5. object ingress.

Should meet IEC 529 Level 3 (IP3X)(spraying water) for enclosure protection,

6. water ingress.

Should have local service facility. The service provider should have the

necessary equipments recommended by the manufacturer to carry out

7. preventive maintenance test as per guidelines provided in the

service/maintenance manual.

Documentation

1. User Manual in English

2. Service manual in English

BIDDER MUST HAVE TO SUBMITTED PART-III TECH BID PHYSICALLY IN TENDER ALONG

WITH SIGN AND STAMPED. FAILING IN WHICH, WILL BE STRAIGHTWAY REJECTED.

List of important spare parts and accessories included in the warranty with

3. their part number and costing

List of important spare parts and accessories not included in the warranty

4. with their part number and costing

5. Certificate of calibration and inspection from factory

Warranty and After Sales Service:

All spare parts and consumables should be available with supplier or

1. principal

Should have local service facility .The service provider should have the

2. necessary

Equipments recommended by the manufacturer to carry out preventive

3. maintenance test as per guidelines provided in the service/maintenance