856- Maintenance of District Panchayath Office Building Completion - Electrification

Amount

Electrical work

90.15.3.1:Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters

OD513555/2024-2025:Supply, conveyance, installation, testing and commissioning of 150 Watts single piece LED Flood light fittings suitable for roadway installation with pressure diecast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuser for higher impact strength and optimum light transmision, High efficient driver with short circuit, over voltage, over courent and thermal protection, Surge protection up to 5 KV, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing armand giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranted for 3 years from the date of commissioning from any defects in manufactring. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Crompton/ Havells )

OD513556/2024-2025:Supply, conveyance, installation, testing and commissioning of 200 Watts single piece LED Flood light fittings suitable for roadway installation with pressure die-cast aluminium housing with corrosion resistance powder coating using Nano technology, natural cooling system,, Poly Carbonated UV treated diffuser for higher impact strength and optimum light trasmision, High efficient driver with short circuit, over voltage, over courent and thermal protection, Surge ptotection up to 5 KV, PF 0.95, IP 65 protection, Horizontal Pole Mounting type fittings with all connected accessories fixing on the existing armand giving connections with 1.5 sq. mm 3 core PVC insulated and PVC sheathed copper conductor fles wire etc. as required The LED fittings shall be guaranted for 3 years from the date of commissioning from any defects in manufactring. Any of the spares / components which are found to be defective during this period shall be replaced immediately at free of cost. (Make: Philips/ Crompton/ Havells )

90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

90.12.1.2:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 6 sq mm

90.12.1.3:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 10 sq mm

90.12.7.2:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp

90.12.7.3:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 10 sq mm with factory made clamp

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

OD512467/2024-2025:Supply and providing Single dial timer unit analog type with contactor and relay

OD512992/2024-2025:Supply, Conveyance and errection of B class 32 GI pipe, 1.2 mts length in single section for post top arm with GI Clamp GI nut bolt etc and with 2 coats of stnthatic enalal paint over a coats of zinc chrimate primer etc fixed on exesting KSEB pole.

OD512993/2024-2025:Supply and providing 20 x 14 size Sindex box fixed on the exesting pole

OD512994/2024-2025:Fabrication,supply and Installation of 3 meter height 50 mm B class GI pole structure suitable for fixing ornamental outdoor fitting with<br>necessary base plate, painting with metal primer and mat black finish enamel paint , fixing the structure<br>after necessary excavation( pit of 40cmx40 cmx40cm) with cement concrete( Excluding the rate of CC)

OD512995/2024-2025:Supply, installation, testing and commissioning of decorative type 30 watts garden light with all connected accessories fixed on the existing pole and giving connection. The LED garden Lighting luminaire shall be of IP65 protected, pressure die cast aluminium housing body with optimal heat sink, with system wattage of 30 with rated life of L70 @ 50,000 hours, CRI greater than or equal to 70 & with system lumens greater than 3900 and system efficiency greater than or equal to 90%.The Light fitting shall be with all required accessories suitable for mounting in on the pole . Weight of luminaire shall not be more than 7 Kg per fitting.The luminaire should meet all the technical specifications as mentioned .( Luminaire . Havells - LHEVBHP 7 PN 6 KO 25 / Polycab /Equivalant)

OD512996/2024-2025:supply and fixing 30 watts LED bulb in the existing lamp holder

OD513051/2024-2025:Supply, Conveyance, Installation, Testing and Commissioning of gate lamp fixed on piller and giving connection

OD513052/2024-2025:Supplu, Conceyance, installation, Testing and Commissioning of decrative type gate lamp with metalic enclosure , 40 W LED lamp etc. on the exisiting GI pipe and giving connection

9.1.1:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)

9.1.2:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement).

OD513435/2024-2025:Supply and fixing 32 A DP switch on the existing modular plate

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

90.6.5.4:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.2 core 1.50 sq mm

1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)

1.28.1:Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module

Bidder Name

K J JOSEPH AND SONS ELECTRICAL CONTRACTORS AND ENGINEERS