Rajkot Division :-Provision of New Office Building for Reserved company at Rajkot(RPF), 10 bed GRP barrack at Rajkot & Improvement to GRP police thana at Surendranagar, Rajkot, Jamnagar, Dwarka, Khambhalia and OKHA and Approach Road and furniture at Dwarka and Surendranagar for RPF barrack.

Item Breakup - A-DSR ITEMS

77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the 18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 117 18.7.1 15 mm nominal dia Pipes Metre 100 286.8 28680 118 18.7.3 25 mm nominal dia Pipes Metre 100 401.55 40155 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 119 18.8.3 25 mm nominal dia Pipes Metre 100 627.25 62725 120 18.8.4 32 mm nominal dia Pipes Metre 100 739.3 73930 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 121 18.9.3 25 mm nominal dia Pipes Metre 100 355.4 35540 122 18.9.4 32 mm nominal dia Pipes Metre 100 438.6 43860 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and 18.10 making good the walls etc. ( Internal work - Exposed on wall ) 123 18.10.1 15 mm dia nominal bore Metre 65 366.4 23816 124 18.10.3 25 mm dia nominal bore Metre 60 551.7 33102 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work 125 18.12.1 15 mm dia nominal bore Metre 5 322.15 1610.75 126 18.12.3 25 mm dia nominal bore Metre 55 467.75 25726.25 127 18.12.6 50 mm dia nominal bore Metre 50 762.15 38107.5 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 128 18.13.1 25 to 40 mm nominal bore Each 1 911.9 911.9 RAJKOT DIVISION-ENGG/WESTERN RLY 129 18.13.2 50 to 80 mm nominal bore Each 1 1785.35 1785.35 18.15S BRASS FITTINGS Providing and fixing brass bib cock of approved 18.15 quality : 130 18.15.1 15 mm nominal bore Each 2 353.25 706.5 Providing and fixing brass stop cock of 18.16 approved quality : 131 18.16.1 15 mm nominal bore Each 1 353.25 353.25 Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 132 18.17.1 25 mm nominal bore Each 2 622.4 1244.8 133 18.17.4 50 mm nominal bore Each 2 1026.65 2053.3 Providing and fixing ball valve (brass) of 18.18 approved quality, High or low pressure, with plastic floats complete : 134 18.18.3 25 mm nominal bore Each 2 464.05 928.1 Providing and fixing C.P. brass shower rose 18.22 with 15 or 20 mm inlet 135 18.22.1 100 mm diameter Each 3 193.95 581.85 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 10500 11 115500 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 136 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 137 18.49.1 15 mm nominal bore Each 3 506.8 1520.4 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 138 18.52.1 15 mm nominal bore Each 4 670.45 2681.8 18.54S PTMT FITTINGS Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, weighing Each 1 208.45 208.45 139 not less than 110 gms 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.65 Providing and fixing PTMT soap Dish Holder Each 3 111.45 334.35 having length of 138mm, breadth 102mm, 140 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of 19.1 cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 141 19.1.1 100 mm diameter Metre 15 443.6 6654 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb 19.32 shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1 With common burnt clay F.P.S. (non modular) Each 2 26861.9 53723.8 142 bricks of class designation 7.5 21.0 ALUMINIUM WORK RAJKOT DIVISION-ENGG/WESTERN RLY 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket 21.1 etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 1275 495.05 631188.75 143 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in 21.2 aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative Sqm 120 1139.3 136716 144 lamination on one side and balancing lamination on other side Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.3 With float glass panes of 8 mm thickness Sqm 70 1685.4 117978 145 (weight not less than 20 kg/sqm) 22.0 WATER PROOFING 22.1S General 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 30 8042.3 241269 146 sand : 4 graded stone aggregate 20 mm nominal size) 147 22.14.2 Cement mortar 1:3 (1 cement : 3 coarse sand) cum 30 16112.1 483363 26.0 NEW TECHNOLOGIES AND MATERIALS 26.41S NEW TECHNOLOGY ITEMS Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of 26.68 grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: 148 26.68.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 40 7387.25 295490 Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of 26.69 grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level 149 26.69.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 125 9844.65 1230581.25 Total 25052497.55