Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.9 LAccepted-AOC D 502 SHIVILOK COLONY RAIPUR ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹27.4 L+₹2.5 L (9.90%)Rejected-AOC 60 B C BAZAR AMBALA CANTT HARYANA 133001 | AMBALA | HARYANA | 133001 | L2 | Rejected-AOC Rejected being not L1 | |
| 3 | L3₹34.3 L+₹9.4 L (37.7%)Rejected-AOC 121 GURU GOVIND SINGH MARG LAL KUAN LUCKNOW UTTAR PRADESH 226001 | LUCKNOW | UTTAR PRADESH | 226001 | L3 | Rejected-AOC Rejected being not L1 | |
| 4 | L4₹36.6 L+₹11.7 L (46.8%)Rejected-AOC 474 27 NORTH CIVIL LINE 5 SAKET COLONY MUZAFFARNAGAR UP 251 001 | MUZAFFARNAGAR | UTTAR PRADESH | 251001 | L4 | Rejected-AOC Rejected being not L1 |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
2 Mar 2022, 6:00 pmClosed
GE (MES) ROORKEE
Garrison Engineer Military Engineer Services Roorkee
REPAIR AND POLISHING OF VARIOUS WOODEN FURNITURE UNDER BSO OF GE ROORKEE
2022_MES_505279_1
8392/128/E8
Open Tender
Civil Works
Item Rate
270 days
Roorkee
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (MES) Roorkee
₹78,000
Yes
1 Jun 2022
2 Feb 2022
4 Mar 2022
2 Feb 2022
2 Mar 2022
17 Feb 2022
Amount
Chair Dining JCO / OR MAP Wooden FD/MAP-II / 05 / similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/back/left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Back horizontal rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC moulded seat
Stiffener set of three at legs made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC ring
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of chair dining JCOs/ORs by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Chair Dining FD- 279/ similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Upper/lower stiffener set of three of back support made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/rear/left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffner set of three of Leg bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Canning of seat with approved quality of PVC cane
PVC shoe
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of chair dining by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Chair dining officer MAP Wooden FD/MAP-II / 04 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Seat with ply and Rexene instead of tapestry
Front/back/left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Back vertical rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Back horiozontal top rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffner complete at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC ring
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of chair dining officers by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Chair Easy FD- 229 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front left/right Leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear left/right leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Left/right arm rest made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/rear/left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Top/bottom/left/right rail of back frame
Canning of seat with approved quality of PVC cane
Canning of backet with approved quality of PVC cane
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of chair easy by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Chair writing ( FD- 280 ) /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front left/right leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear left/right leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Upper/lower stiffener of back support made of Ist class hard wood (teak wood) of size as shown on drawing.
Left/right arm rest made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/rear//left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Canning of seat with approved quality of PVC cane
PVC shoe
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of chair writing by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Chair WBB w/o arm FD- 225 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Front left/right leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Rear left/right leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Upper/lower Stiffener set of three of back support made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/rear/Left/right rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of chair WBB by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Bed plytop wooden Drg No - FD/MAP/01 and similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Stiffener made of Ist class hard wood (teak wood) of size as shown on drawing.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Head rest without rexene & leg made of Ist class hard wood (teak wood) plank of size as shown on drawing.
Rexene best quality for each head rest
Foot rest without leg made of Ist class hard wood (teak wood) plank of size as shown on drawing.
Head leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Foot leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Top ply for sleeping made of 12mm thick plywood BWR grade of aproved quality of size as shown on drawing
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of bed ply top wooden by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Bed plytop wooden Drg No - FD-246 and similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Stiffener made of Ist class hard wood (teak wood) of size as shown on drawing.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Head rest without leg made of Ist class hard wood (teak wood) plank of size as shown on drawing.
Foot rest without leg made of Ist class hard wood (teak wood) plank of size as shown on drawing.
Head leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Foot leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Top ply for sleeping made of 12mm thick plywood BWR grade of aproved quality of size as shown on drawing
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of bed ply top wooden by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table wooden 3’x3’ without drawer/similar pattern FD- 291 / similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffner at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg without PVC shoemade of Ist class hard wood (teak wood) of size as shown on drawing.
Front/back/left/right rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of table 3'x3' without drawer by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table wooden 3' x 2' with Drawer FD-283/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg without PVC shoemade of Ist class hard wood (teak wood) of size as shown on drawing.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Drawer made out of 12mm thick BWR grade commercial plywood with front side made out of 12mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 3mm thick Ist class hard wood beading on top edges.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of table 3'x2' with drawer by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table writing wooden FD-275, similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Leg without shoe made of Ist class hard wood (teak wood) of size as shown on drawing.
Front/rear rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Left/Right side rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Drawer made out of 12mm thick BWR grade commercial plywood with front side made out of 12mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 3mm thick Ist class hard wood beading on top edges.
Drawer bearer made of Ist class hard wood (teak wood) of size as shown on drawing.
Shutter with 12mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 3mm thick Ist class hard wood beading on all exposed edges.
Shelf made of 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 3mm thick Ist class hard wood beading on exposed edges.
Left/right sides made of 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 3mm thick Ist class hard wood beading on all exposed edges.
Back ply with 12mm thick BWR grade commercial plywood
Brass Knob with 25mm dia decorative type as per sample.
Continuous (piano type) hinge mild steel electrogalvanized of suitable length and width of flap
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of table writing by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Teapoy Wooden FD-278 similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Leg without PVC shoemade of Ist class hard wood (teak wood) of size as shown on drawing.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of teapoy by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table Peg wooden 384 / similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing. without PVC ring
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of peg table by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table center wooden frame FD-274, similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffener at bottom made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing. without PVC ring
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of centre table by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table wooden 3' x 2' without Drawer FD-284/ similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffenerset of leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg without PVC shoemade of Ist class hard wood (teak wood) of size as shown on drawing.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of table 3'x2' without drawer by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table wooden 2’x2’ without Drawer FD-293 / similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Stiffener set of leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing without PVC ring
Front/back/left/right rail of top sheet made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of table 2'x2' without drawer by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table Wooden 5'x2'10" FD139 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of table 5'x2'10" by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table Dining 06 persons wooden FD- 273 / similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing. without PVC ring
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Stiffener at top made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of table dining 6 pers by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Table Dining 08 persons wooden FD-273/similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Hard Top with 18/19mm thick prelaminated particle board with decorative choice lamination on outer side and other side with balancing white lamination with 6mm thick Ist class hard wood beading on all exposed edges.
Leg without made of Ist class hard wood (teak wood) of size as shown on drawing. PVC ring
Long rail made of Ist class hard wood (teak wood) of size as shown on drawing.
Short rail made of Ist class hard wood (teak wood) of size as shown on drawing.
PVC shoe
Bracket made of Ist class hard wood (teak wood) of size 75mmx75mmx25mm thick
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of table dining 8 pers by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Sofa MAP Wooden FD/MAP-II / 02 /similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Leg front made of Ist class hard wood (teak wood) of size as shown on drawing.
Vertical rail/Leg of back made of Ist class hard wood (teak wood) of size as shown on drawing.
Side rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Arm rest of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Bearers / stiffener of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Back ply made of 12mm thick BWR grade for single seater
Seat ply made of 12mm thick BWR grade for single seater
Front rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Rear rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Top/bottom rail of back made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Removing of existing unserviceable cushion from sofa sets (MAP) 3/1 seater and S&F new cushion for seat & back of size 21"x22" x100mm thick made of 40 density foam duly stitched with good quality white cloth inside & tapestry cloth outside of superior quality (Rate not less than Rs. 500/- Per mtr) width not less than 4 feet complete all as specified and directed by Engineer-in-Charge.
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of sofa single seater (MAP) by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of sofa three seater (MAP) by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
Sofa wooden FD-281/ similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg complete all as specified and directed by Engineer-in-Charge
Battens of back made of Ist class hard wood (teak wood) of size as shown on drawing.
Battens of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Leg made of Ist class hard wood (teak wood) of size as shown on drawing.
Vertical rail of back made of Ist class hard wood (teak wood) of size as shown on drawing.
Side rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Arm rest of seat made of Ist class hard wood (teak wood) of size as shown on drawing.
Front rail of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Top/bottom rail of back made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Bearers of back made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Bearers of seat made of Ist class hard wood (teak wood) of size as shown on drawing. of single seater
Removing of existing unserviceable cushion from sofa sets 3/1 seater and S&F new cushion for seat & back of size 21"x22" x100mm thick made of 40 density foam duly stitched with good quality white cloth inside & tapestry cloth outside of superior quality (Rate not less than Rs. 500/- Per mtr) width not less than 4 feet complete all as specified and directed by Engineer-in-Charge.
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of sofa single seater by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
M&L for preparing / cleaning of old polished / newly replaced wooden parts surfaces of sofa three seater by tightening all loose joints/parts as required, rubbing with emery paper, removing all spots/nail holes etc, filling with putty and applying one or more coats of wooden polish to give smooth and glossy finished surfaces at furniture yard / Md / OTM buildings under AOR of GE complete all as specified and directed by Engineer-in-Charge.
M/s R.K.Jain
JAISWAL ENTERPRISES
VARAROHA BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .