GENERAL FDR 2024 25 Providing bit BC overlay to Wada Canal North Bank Road from ch 1/000 to 2/210 FDR work General Civil Work

Amount

Wada Canal North Bank

5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

5.6.2.a:Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with a bituminous binder( NRMB) @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level, and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects For Grading - II (13.2 mm Nominal Size)

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-

OD311407/2024-2025:Providing and fixing of DLP board with Non-retro-reflectorized Vinyl Sign with 1 years warranty manufactured Vinyl Printed Sheeting fixed over aluminum sheeting 2 nun thick/aluminium composite material sheeting 4 rum thick with area not exceeding 0.9 sqm with suitable back supporting flame of MS angle 40x40x6 and supported on GI pipe pole 50 I'm NB confirming to IS 123.9 firmly fixed to the ground by means of properly designed foundation with m1@ntilde; grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer as per approved draing and clause 801 including lettering symbols etc.

THASLIM A (BID ID -2251312)

Bidder Name

THASLIM A

Farookh Baiju