Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC 161 MISSION INTER COLLEGE ROAD VILL PITHORAGARH DISTRICT PITHORAGARH STATE UTTARAKHAND PIN 262501 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262501 | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹17.7 L+₹54,680 (3.18%)Rejected-Finance VILL KASHNI NEAR AANCHAL DAIRY PO BIN PITHORAGARH UTTARAKHAND PIN 262508 | PITHORAGARH | PITHORAGARH | UTTARAKHAND | 262508 | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹18.3 L+₹1.1 L (6.66%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹19.4 L+₹2.2 L (13.0%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹21.9 L+₹4.7 L (27.5%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹26.2 L
EMD Value
₹53,000
Closing Date
30 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Pithoragarh
GE Pithoragarh Post - Bharkatiya Pithoragarh - 262520
SPL REPAIR TO BLDG No. T-282 (ESM GUEST ROOM) OF KUMAON SCOUTS AT MIL STN DHARCHULA.
2023_MES_621265_1
8556/PGH/E8
Open Tender
Civil Works
Item Rate
240 days
Dharchula
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE Pithoragarh
₹53,000
Yes
26 Dec 2023
30 Sept 2023
6 Nov 2023
30 Sept 2023
30 Oct 2023
16 Oct 2023
3 Oct 2023 - 9 Oct 2023
Amount
DESCRIPTION OF ITEMS
Demolition of cement concrete in ground floor,paving nexc 15cm thick (below or above GL) complete all as specified and directed.
M&L for 25 mm th PCC 1:2:4 type B1 (using 20 mm graded stone agg) as in subbase complete all as spfd & directed.
M&L for cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate 75 mm thick as in plinth protection all as specified and directed.
M&L Cement concrete 1:4:8 type D2 (40 mm gradede agg) in foundation, filling and mass concrete complete all as specified and directed.
Demolition of brick work, stone/boulder masonary built in cement mortar complete all as specified and directed.
M&L for precast cement concrete block masonary with P.C.C 1:3:6 mix type C-1 block exc 10cm in width and set in CM1:6 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M/L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surface, 450x350x7-8mm thick set and jointed in neat sement slurry and pointed in white or colour cement to match over 10 mm thick plaster in CM 1:4 complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with or without glazing bars, dovetailed or welded complete all as specified and directed.
S&F framed work as in doors,gates,partition of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other coverings etc fastening and fixing of FE-410W Gde E-250 Grade A complete all as specified and directed.
M&L for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both side, face of door be lipping with 6 mm teak wood lipping, complete all as specified and as directed.
S&F 35 mm th 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing all as specified.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.
S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as spfd & directed.
S & F of 3mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square in each pane complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S & F in Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue,anodised with hard drown steel spring, fixed in floors 150 mm long all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and of extruded sections or cast-aluminium alloy and fixed all as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed
S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.
S&F 200 mm aluminium anodised barrel tower bolts extruded section complete all as specified and directed.
Taking down cement plaster on brick or stone walls, of any description including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L 12 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Preparing new surfaces, plastered or unplasterd old decorated wall surfaces and applying two coat of oil emulsion distemper over a coat of plaster of paris putty of 1mm thckness over plastered surface to prepar the surface even and smooth complete all as specified and directed.
M&L for preparing newly plastered surface of wall apply two coat of cement base paint over a coat of white wash complete all as specified and directed.
M&L three coats of white wash on wall surfaces including prepration of new plastered surfaces complete all as specified and directed.
M&L for preparation of old decorated surfaces and applying one coat of white wash on walls complete all as specified and directed.
M &L for preparation of (previously treated) surfaces of walls and applying one coat of oil emulsion distemper any tint of walls complete all as specified and directed.
S&F in repairs vitreous china wash basin,white flat back size 550X400mm incl brackets, fixing in position complete all as specified and directed.
S&F in repairs vitrous china wash down water closet pan (padestal pattern) white colour(excluding cistern), complete all as specified and directed.
S&F plastic water closet seat cover, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S&F PVC flushing cistern low level white with inlet pipe,ball valve,float valve and handle including brackets and PVC flush pipe 32 mm dia fixed in repairs complete all as specified and directed.
S&F in repair 15 mm bore bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply and Fix in repair 15 mm Basin Mixer, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
Supply and fix in repairs CP Wall Mixer with provision for Overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges for 15mm dia pipe complete all as specified and directed.
S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
S&F in repairs Health Faucet (ABS Body) MS, Chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
Supply and fix in repair brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and directed.
S&F in repair 15 mm Stop valves/ angle valve , fancy type, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600 mm long all as spfd and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.
S&F for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.
S&F for 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wallcomplete all as specified and as directed.
S&F for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.
S&F 75 mm PVC (SWR) bends any radius complete all as specified and as directed.
S&F 110 mm PVC (SWR) bends any radius complete all as specified and as directed.
S&F PVC (SWR) junction, with access door, single (single T) equal or unequal, for 110 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) junction, with access door, single (single T) equal or unequal, for 75 mm bore of pipe complete all as specified and directed.
S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
S&F PVC (SWR) 'P' trap 110 mm bore complete all as specified and directed.
S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flange complete all as specified and directed.
S&F for round Grating 100mm dia with or without waste hole of PTMT complete all as specified and directed.
S&F of sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard & railing 60 cm long complete all as specified and directed.
M&L for 32mm in size Waste fittings, brass, chromium plated for stainless steel sinks, glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S & F 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm complete all as specified and directed.
S&F 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed in repairs all as specified and directed.
S&F 15 mm bore GI tubing with all fittings medium grade fixed to wall or laid in floor etc including taking up or down 15 mm GI tubing complete all as specified and directed.
Supply and fix 1000 Ltr rotational moulded polyethylene water stotage tanks ( cylinderical vetrticle with closed top) hoisted & fixed in position including dismantling water tank capacity exc 500 ltrs but nexc 1000 ltrs and removing to stores complete all as specified and directed.
Supply and fix in repairs gun metal, globe or gate vlave 15mm dia bore with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
Dismantling structural steel work including doors, gates etc all as specified and as directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and gastenings and heavy brackets framing (beam, tee, angle channel or flat sections) (Fe-290 Gde E-165) inicluding distance pieces, cleats etc.
Dismantling of wall and celing boards/AC sheets in any thickness & any position including cover fillets complete all as specified and directed.
M&L for 6mm thick Plywood, grade BWR, type BB, fixed in ceiling and walling with screws to timber frame work complete all as sfd and directed.
Dismanteling of timber scantling 40 sqcm and over in section in any position for unframed works complete all as specified and directed.
M&L for 2nd class hard wood as in scantling clean sawn framed & fixed as in ceiling and walling wks, complete all spfd & directed.
Dismantling of timber scantling 40 Sqcm under in section in any position, fixed with nails unframed work complete all as spfd & directed.
M&L for II nd class hard wood plain fillets squaree or rectangular in section clean sawn secured with nails sectional area exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed.
M&L II nd class hard wood plain fillets square or rectangular in section cleansawn but bullnosed chamfared or rounded on one edge or face sectional area exc 3 sqcm and nexc 6 sqcm secured in nails complete all as specified and directed.
M&L for one coat of creasote oil to wooden surfaces new or old of any description including prepration of surfaces complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting of any guage/thickness in roof covering/wall clading complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for one coat of synthtic enamel paint over to old wooden surface of any description exc 10 cm girth or width including prepration of wooden surfaces complete all as specified and directed.
M&L for one coat of synthtic enamel paint to old steel surfaces of any description exc 10 cm girth or width including prepration old steel surfaces complete all as specified and directed.
M&L for two coat of synthtic enamel paint over a coat of pink primer to new wooden surface of any description exc 10 cm girth or width including prepration of new wooden surfaces complete all as specified and directed.
M/L for two coats of synthetic enamel paint over a coat of red oxide primer to new steel surfaces of any description over 10 cm in width or girth incl preparation of new steel surfaces complete all as spfd and directed.
S&F in repairs (curtain rod) Harrison rails, anodised aluminium alloy with fixing blackets, stops, rollers etc complete all as specified and directed.
E/M Items :
Taking down carefully copper/aluminium point wiring (light, fan, socket or power ) complete incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc all as specified and directed.
M&L point wiring with 1.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor FRLS cable in open/ surface PVC conduit of suitable size, complete with all accessories/fitting and heavy duty PVC terminal switch board for mounting switches, sockets, regulators of suitable size with plastic module surface sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 1.5 Sqmm multistranded copper conductor as contineous earth wire and connecting to earth dolly complete all as specified and directed for one light point/Fan point controlled by one way switch of 5/6 Amps complete all as specified and directed.
One 3/5 pin socket outlet point on same board controlled by one way switch of 5 Amps but with cables 1.5 sqmm size complete all as specified and directed.
One 3/5 pin socket outlet point on independent board controlled by one way switch of 5 Amps but with cables 1.5 Sqmm size complete all as specified and directed.
M&L power point wiring with 2.5 Sqmm (Nominal cross sectional area) single core PVC insulated with PVC unsheathed multi stranded copper conductor cable in open/surface PVC conduit of suitable size, complete with all accessories /fitting and heavy duty PVC terminal switch board for mounting switches, sockets of suitable size with plastic module sheet top cover open recessed on all and brass screw and washer including unsheathed single core PVC insulated cable green in colour 2.5 Sqmm multistranded copper conductor cable as earth wire and connecting to earth dolly complete all as specified and directed for 3/5 pin, 15/16 Amps power socket controlled by one no, one way switch of 15/16 Amps complete all as specified.
S&F switch piano flush button single pole one way 5 Amps complete all as specified and directed.
S&F switch piano flush button single pole one way 15 Amps complete all as specified and directed.
S&F socket out let 3 pin 5/6 Amps flush type complete all as specified and directed.
S&F socket out let two in one 3 pin 5/6 Amps and 3 pin 15/16 Amps, flush type, non shutters, non interlocking complete all as specified and directed.
S&F ceiling rose, surface bakelite, AC, 60x30mm, 3 terminals complete all as specified and directed.
S&F lamp holder PVC/Polycarbonate type with cord grip cap suitable for pendants fittings complete all as specified and directed.
S&F lamp holder PVC /poly carbonated type with back plate suitable for batten fittings complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.
S&F sheet metal enclosure for DB SPN 8 way with 200 Amps rated busbar 240 Volts, double door suitable for housing MCBs and isolators complete all as specified and directed.
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.
S&F 32 Amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral , in the MCB DB Complete with connection testing and commissioning complete all as specified.
S&F in replacement LED tube light 4' long along with all fixtures and fittings, internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size, 20W complete all as specified and directed.
S&F in replacement LED tube light 2' long along with all fixtures and fittings, internally pre wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size, 10W complete all as specified and directed.
S&F LED Bulb/LED retrofit 'T' bulb 12 watts, complete all as reqd at site and directed.
S&F 1x35 watt LED building security light fitting, with and including GI bracket made out of 1.5 mtr GI pipe bent to shape light grade of 40mm dia, bracket clamps nut bolts and washers etc and making electric connection with 3 core 1.5 sqmm PVC insulated copper conductore cable complete all as specified and directed.
Taking down ceiling fan, sealing cable end, dismantling blades and hanging the same complete with three blade, down rod, accessories and connecting up with twin core twisted flexible cable from ceiling rose complete all as specified.
M&L for taking out burnt copper winding from ceiling fan of 1200 mm size and rewinding with existing /same guage of super enammeled copper winding wire including replacing ball bearing complete all as specified and directed.
Taking down exhaust fan, sealing cable end, dismantling blades and hanging the same complete with blades, accessories and connecting up with twin core twisted flexible cable from ceiling rose complete all as specified.
M&L for taking out burnt copper winding from exhaust fan 300/450 mm size and rewinding with existing /same guage of super enammeled copper winding wire complete all as specified and directed.
Labour only for dismantling electric meter temper proof from ESM bldg and remove to store for safe custody and re-fixing the same after completion of bldg repair work as existing complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick, buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level, conneted to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, cheek nuts and washers of galvanised or iron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 6Cm reinforced with 8 mm dia deformed bar @ 5 cm c/c with one handle for lifitting made out of 8 mm dia MS bar, funnle, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal and salt in alternative layers necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR part-I, 2009.
Supplying and fixing 1100 volts grade heavy duty 10 sqmm cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.
House service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 900 bends. M.S. hook and stay or guy complete all as specified and directed.
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S&F bracket made out of GI tubing 1.5 mtr long of 40 mm dia light grade bent to shape with suitable size MS clamps, nut, bolts and washers including one coat of anti corossive primer and two coats aluminium paints with 3 core 1.5 Sqmm multistranded copper cable from LED light to pole box complete all as specified and directed.
Note : Tenderers may note that amount of credit Rs 70,795.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.
M/s J P Traders
M/S SUNIL KUMAR CONT
M/S ANAND SINGH DHAMI
M/S HIRA CHAND
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .