Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹17.9 L+₹3.1 L (20.6%)Accepted-Finance | L2 | Accepted-Finance Rejected L1 being accepted | |
| 2 | L1₹14.9 LRejected-Finance HOUSE NO 105 PANTHEERMA VILLAI NEAR NELLIKKAVILLAI CSI CHURCH VELLAYAMBALAM VENCODE P O KANYAKUMARI DIST TAMIL NADU 629 171 | VENCODE | KANYAKUMARI | TAMIL NADU | 629171 | L1 | Rejected-Finance Admitted Found Reasonable for Acceptance |
Tender Value
₹17 L
EMD Value
₹34,000
Closing Date
28 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Trivandrum
Office of Garrison Engineer Army, Thirumala Post, Trivandrum-06
As per tender documents
2022_MES_560393_1
GE (ARMY) TVM 9492/E8
Open Tender
Civil Works
Item Rate
180 days
GE Army Trivandrum
As per NIT
8 documents required · 8 mandatory
₹500
GE Army Trivandrum
₹34,000
Yes
10 Dec 2022
29 Oct 2022
5 Dec 2022
29 Oct 2022
28 Nov 2022
14 Nov 2022
Amount
Roughening of surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc and brrushing neat cement slurry with 3 kg of cement per sq metre etc complete all as specified and directed.
M&L for rendering in CM 1:3, 10 mm thick mixed water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement etc complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately.
M&L for APP modified water proofing membrane thickness not lessthan 4mm and weighing not less than 4.50 Kg/ Sqm reinforced with non-woven polyster, matt black finished ( wt not less than 150 gms / sqm), laying by torch application including minimum 100mm overlap over compatible primer @ 0.40Lit/sqm and finishing with solar refelective Bituminous aluminum paint 100 gms /sqm including dismantling and removal of exisiting unserviceable membrane etc complete all as specified.
Demolition of cement concrete (unreinforcement) as in roofs,floor (other then ground floor ) , beams , staircase, landings,chajjas and similar suspended work all as per specified and directed.
M&L for PCC 1:2:4 type B0 with 12.5mm graded granite stone aggrigate 25mm thick over RCC roof all as per specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar etc complete all as specified and directed.
M&L for Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and directed.
Taking down cement plaster of any description of brick or concrete including racking out hacking for key, joints scrubbing down with water etc all as specified and directed by Engr-in-charge.
M & L for Rendering 5 mm thick on fair faces of brick work with cement mortor (1:4) mixed with water proofing compound @ 3% by the weight of cement over 10mm thick with cement mortor (1:6) in external surfaces of wall (upto four storey building) all as specified and directed. Note:Water proofing compound will be measured and paid separetly.
M & L rendering 10 mm thick in ceiling/facia with cement mortor (1:3), finished even and smooth without using extra cement all as specified and directed.
Supply only integral water proofing compound
M & L for applying two coats of acrylic exterior emulsion paint over one coats of primer including preparing of new plastered surfaces surfaces on external walls as per manufacturer's instructions etc complete all as specified and directed.
M & L for preparing new plaster surfaces of walls and applying three coats of white wash on ceiling etc complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of concrete surfaces finished fair and smooth in patches without using extra cement etc complete all as specified and directed.
M&L for two coats of oil bound distember over a coat of primer including prepartion of new plastered surfaces of wall over 10 cm width or girth etc complete all as specified and directed.
Dismantling of wall and ceiling boards or insulation boards any thickness including frame work and cover fillets etc complete all as specified and directed.
S&F Non Asbestos decorative type fibre cement building boards , 4 mm thick fixed or laid / inserted to timber / GI / Aluminum frame work with screws on ceiling etc complete all as specified and directed.
M&L for Anodised aluminum snap grid frame work for false ceiling sizeof grid 605 x 605 mm etc complete all as specified and directed.
S&F Plain mild steel wire 2.5 mm dia galvanised class 3 in detached work sutch as for mosquto nets and fixing to straining bolts, hook, eye, etc complete all as specified and directed.
Dismantling of single layer Mangalore pattern or similar tiles in roofing including ridge tiles etc complete all as specified and directed.
S&F Roof tiles , mangalore pattren, interlocking at side joints, laid dry (upto four storey building) complete all as specified and directed.
All as per item No 21 here-in-before but except tiles.
S&F Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 etc complete all as specified and directed.
M&L for providing, Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed.
Dismantling fillets for tiles battens, rafters, purlins etc under 40 sq.cm in section (unframed work) all as specified and directed .
M&L for 2 nd class hard wood clean sawn plain fillets square, rectangular or triangular in section, secured with nails or brads sectional area exc 13 but n exc 25 sq.cm complete all as specified and directed .
All as per item no 26 here-in-before but except fillets
Dismantling timber scantling 40 sq cm and over in section unframed work, in any position etc complete all as specified and directed.
M&L for second class Hard Wood scantling, clean sawn fixed etc complete all as specified and directed.
All as per item No 29 here-in-before but except scantlings.
Dismantling of corrugated/ plain steel or aluminium sheeting of any gauge, thickness including Nainital or similar pattern roof covering etc complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws and J hooks etc complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof ridge, wall clading etc , fixed with self tapping screws and J hooks etc complete all as specified and directed.
S & F in repairs PVC (SWR) pipes 160 mm dia single socketed in any length with rubber ring joints fixed to walls (Upto four storey building) inclding fixing of stack clamps and making good plaster/brick work/RCC surfaces surrounding the PVC drain water pipe and applying exterior wall paint to match the existing surfaces all as etc complete all as specified and directed.
S & F in repairs PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls (Upto four storey building) and making good plaster/brick work/RCC surfaces surrounding the PVC drain water pipe etc complete all as specified and directed.
S & F in repairs PVC (SWR) bends in any radius 110 mm dia etc complete all as specified and directed.
S & F in repairs PVC (SWR) bends in any radius 160 mm dia etc complete all as specified and directed.
S&F in repair 15mm bore UPVC tubing pressure rating 10kgf/CM2 fixed complete to walls, ceiling or in floors etc any type of pipe inlcuding taking down existing pipe etc (Upto four storey building) etc complete all as specified and directed.
All as per Item No.38 here-in-before but 20 mm bore UPVC tubing
All as per Item No.38 here-in-before but 25 mm bore UPVC tubing
Cutting/clearing/removing small trees, saplings,shrubs and under growth from roofs ,brick walls,chajjas and total roof area cleaning for one building (removing of grass,shrubs/small trees,saplings ,roots )etc including taking out complete roots from inside of PVC pipes (75mm or110mm or 160mm Dia),walls/chajjas,roofs and making good surfaces in cement concrete 1:2:4 type B1 or in cement mortar (1:4) and re fixing of the PVC pipe to match the existing surfaces (Upto four storey building) etc complete all as specified and directed.
Disconnecting existing tanks, capacity exc 250 and n exc 500 setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.
Demolition of cement concrete (unreinforcement) as in ground floors or paving n. exc 15cm thick below or above ground level etc complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C2 (40 mm graded stone agg) finished even and smooth without using extra cement as in plinth/hard standing etc complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar 1:4 for skirting / dado etc complete all as specified and directed.
M&L for Vitrified ceramic coloured tiles 10mm thick (square/Rectangular ) area of each tiles exceeding 0.18 Sqm but not exceedng 0.38 sqm, as in floors etc, set and jointed neat cement slurry and pointed with colour cement to match etc complete all as specified and directed.
All as per item No 48 here-in-before but as in skirtings.
M&L for Non skid ceramic tiles 7 to 8 mm thick (square/Rectangular ) area of each tiles exceeding 0.11 Sqm but not exceedng 0.18 sqm, as in floors etc, set and jointed neat cement slurry and pointed with colour cement to match etc complete all as specified and directed.
M&L for glazed ceremic coloured tiles of size 450x300x7mm thick as in skirting/dados set and jointed in neat cement slurry and pointed with coloured cement to match, non skid joint free tiles etc complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, etc complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, etc complete all as specified and directed.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, etc complete all as specified and directed.
S&F Aluminium anodised, Butt hinges 100mm long etc complete all as specified and directed.
S&F Aluminium handles, cast type, anodised of size 125 mm long,etc complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts of extruded section, 150 mm long, etc complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame glazed with putty etc, etc complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, etc complete all as specified and directed.
M&L in repairs Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, etc complete all as specified and directed.
S&F in repairs PVC coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows,(Each opening n.exc 1.50mtr, contained with a pair of clamps and a pair of side ornamental attachments)etc complete all as specified and directed.
S&F in repair Stack clamps suitable for pipe 110 / 100mm bore dia out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed.
SHILPA ENGINEERS AND CONTRACTORS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .