MC and EW PROVIDING PUBLIC AMENITIES (BABY CARE ROOM, R.O DRINKING WATER PLANT, AND UPGRADATION OF TOILET BLOCK) Etc., AT BUDDHIST REMAINS, SANKARAM, ANAKAPALLI DIST., ANDHRA PRADESH

Amount

Demolishing of Dilapidated brick masonry walls of damaged site office building and take away the debris away from the monument including cost of labour charges etc., complete as directed by the site in-charge.

Earthwork Excavation work by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. including cost of materials and labour charges etc., complete as directed by the site in-charge.

Laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources 8 graded stone aggregate 40 mm nominal size derived from natural sources) etc including cost of materials and labour charges etc. complete as directed by the site in-charge..

Laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement All work up to plinth level (1:1.5:3) (1 cement 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc. including cost of materials and labour charges etc., complete as directed by the site in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including cost of materials and labour charges etc. complete as directed by the site in-charge.

Centering and shuttering including strutting, propping etc, and removal of form for Foundations, footings, bases of columns, etc. for mass concrete including cost of materials and labour charges etc. complete as directed by the site in-charge.

Plinth protection wall with Random rubble masonry in cement mortar 1:6 including cost of materials and labour charges etc. complete as directed by the site in-charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift etc. complete as directed by the site in charge.

Laying Reinforced cement concrete work. in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with (1:1.5:3) (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). including cost of materials and labour charges etc. complete as directed by the site in-charge

Steel reinforcement(TMT bars of grade Fe-500D) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including cost of materials and labour charges etc. complete as directed by the site in charge

Centering and shuttering including strutting, propping etc., and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers Suspended floors, roofs, landings, balconies and access platform etc. including cost of materials and labour charges etc. complete as directed by the site in charge.

Construction of Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes including cost of materials and labour charges etc. complete as directed by the site in charge.

Laying damp-proof course 50 mm thick with cement concrete (1:2:4) (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources) including cost of materials and labour charges etc. complete as directed by site In Charge..

Fixing factory made UPVC Doors and windows comprising of UPVC multi chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length( shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, the Window Sash should be fitted with 5mm thick Floated glass, EPDM gasket, G.I 100 * 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant etc. complete as directed by the site in-charge.

Fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. including cost of materials, Labour charges and conveyance etc., complete as directed by the site in-charge.

Supply and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. etc. including cost of materials and labour charges etc. complete as directed by the site in-charge.

Supply and Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar (1:2) (1 cement: 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration including cost of material and labour charges etc. complete as directed by the site in-charge.

Laying flooring with Plain cement concrete (1:4:8) (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) including cost of materials and labour charges etc. complete item of work as directed by site In Charge.

18 mm cement plaster in two coats under layer 12 mm thick cement plaster (1:5) (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. including cost of materials and labour charges etc. complete as directed by the site in-charge.

Laying vitrified floor tiles of size 600X600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matching pigments including cost of materials and labour charges etc. complete as directed by site In Charge.

Painting to interior surface of the walls Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre etc. complete as directed by site In Charge.

Painting to the exterior surface of the wall paint of required shade: (Two or more coats applied @ 3.28 Itr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm etc. including cost of materials and labour charges etc. complete as directed by site In Charge.

Fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid etc. including cost of material and labour charges etc. complete item of work as directed by site In Charge.

Fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: etc. cost of all materials and labour charges etc. complete as directed by site In Charge.

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, Overheads & Contractors profit complete for finished item of work at all floor levels etc. complete as directed by site In Charge.

Supply and fixing of Ashirvad/ Astral Flow guard or equivalent UPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels etc. complete as directed by the site in-charge.

Supplying and fixing CPVC ball valve, Indian make heavy type including cost and conveyance of all materials, labour charges, Overheads & Contractors profit complete for finished item of work etc. complete as directed by site In Charge.

Supply & fixing NP bib tap with health faucet with 1 m long flexible tube and wall hook as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work in all floors etc. complete as directed by site In Charge.

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work in all floors etc. complete as directed by site In Charge.

Supply and fixing of 4" (101.6 mm) multi floor trap with jali UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials, labour charges etc., complete as directed by site in Charge.

Supply and Fixing of 25mm outer dia (1.60 to 1.80) mm thickness medium grade with 15:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) concealed in wall with all required MS junction boxes and all accessories including masonry work for run of mains including all labour charges etc., complete. Makes: GoldMedal /GM/Sudhakar etc. complete as directed by site In Charge.

Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) FRLS/FRLSH/ HFFR/ZHFR P.V.C. insulated 1100V grade as per IS: 694/1990 specification flexible copper cable (ISI marked) in existing pipe with 6A Modular switch (ISI marked) with cover plate, Ceiling rose/BH/ SBH, including all labour charges etc., complete for Light, Bell, Fan and Exhaust Fan points etc., complete. (for Non Residential Building). Makes of wires: Finolex / Gold medal/GM. Makes of switches:-L&T/GM/ Gold medal etc. complete as directed by the site in-charge.

Supply and Fixing of one module PVC 35 blanking plate (safety dummy plate for empty module) for closing the dummy blank modules in the modular switch board for ensuring safety etc., complete. Makes:-L&T/GM/ Gold medal etc. complete as directed by the site in-charge.

Supply and Fixing of 6 Amps modular type (ISI marked) switch, and 6 A 3/2 pin Modular type: socket with cover plate on a common switch board including giving all connections and all labour charges etc., complete. Makes of switches/sockets:-L&T/GM/Goldmedal etc. complete as directed by the site in-charge.

Supply and fixing of 4 No of 6A (ISI marked) modular type switches with 4 No of 6A, 3/2 pin modular type sockets with cover plate on suitable hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete for LABS & Computer Use. Makes of switches/sockets:- L&T/GM/Goldmedal/Million etc. complete as directed by the site in-charge.

Supply and fixing of 16A/6A, 2 in one, modular type socket with 16A switch (ISI marked) modular type with cover plate on existing modular metal switch box including all labour charges, giving all connections etc., complete. Makes of Switches/Sockets:- L&T/GM)/Goldmedal/ Million etc. complete item of work as directed by site In Charge.

Supply and Fixing of of 16A/6A, 2 in one, modular type power socket outlet with 16A switch (ISI marked) modular type and 1 No of 6A modular type sockets with 6A modular type (ISI marked) switch control with front cover plate on hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete with following configurations 1) 16A Socket 1 No 2) 16A Switch - 1 No 3) 6A socket 1 No. 4) 6A switch 1 No Makes of Switches/Sockets: L&T-englaze/ GM/ Goldmedal/Million etc. complete item of work as directed by site In Charge.

Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) FRLS / FRLSH/HFFR/ZHFR P.V.C. insulated 1100V grade as per IS 694/1990 specification flexible copper cable in existing MS conduit pipe for individual lighting circuits including labour charges etc., complete as required for switch boards. Makes of wires: Finolex / Havells/Goldmedal/GM/Million etc. complete as directed by the site in-charge.

Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR/ZHFR P.V.C. insulated 1100V grade as per IS 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges Makes of wires: Finolex / Havells/ Gold. medal/GM/Million etc. complete as directed by site in-charge.

Supply and fixing of TPN 4-way distribution board with IP-43 protection and as per IS 8623; IS 13032; IEC 61439-3, (8+12 Module) with provision to accommodate the ELCB incomer and suitable for single pole outgoing MCB's in sheet steel enclosure with 32A, 10 KA breaking capacity 'c' curve 4 pole MCB as incomer and 12 No of 6 to 32A single pole, 10 KA breaking capacity 'c' curve MCBs as outgoings including making connections etc., complete concealed in wall. (LIGHTING DB). Makes for DBs: Legrand /L&T-and Makes for MCBs: Legrand-DX3 / L&T-AU etc., complete as directed by site in-charge.

Independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C. Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) etc., complete as directed by site in-charge.

Supply and Fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminium / CRCA housing and polycarbonate cover, input voltage AC 220-260 Volts with PF>0.9, Surge protection: 2KV, THD<15%, with high power LEDs having efficacy of? 120 lumens / watt with inbuilt and replaceable driver with earth connection brought outside and frosted cover CCT: 3000K 5700K, minimum CRI>70 etc., complete including fixing on wall /Ceiling with PVC/TW round blocks with all accessories including giving connections and all labour charges etc., complete with 5years warranty. Makes: a) Luminaire make: Phillips/Crompton / Wipro / Bajaj / Havells b) LED make: PHILIPS/LG etc., complete as directed by site in-charge.

Supply and Fixing of batten holder/angle holder on existing block with 5W LED Lamp with input voltage 90 to 300V, Colour temperature 3000k - 6500k, Beam angle 170-220 degrees, B22 base and all labour charges etc., complete. In lieu of ceiling rose. Makes: Phillips/Crompton / Bajaj / Havells / GM/HPL/Syska /Gold Medal " etc., complete as directed by site in-charge..

Supply and Fixing of heavy duty 9 W LED Down lighter, suitable for recessed/surface mounting made of die cast aluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13): 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LED's having efficacy of > 120 lumens /watt, CCT: 3000K-5700K, minimum CRI > 70, luminaire performance complies to IS 10322 (Part 5/Sec-3) etc., complete including fixing in the ceiling with recessed/surface mounting, cost of all accessories and giving connections etc., complete with 5 years warranty. a) LUMINAIRE MAKE: Phillips / Crompton /Bajaj / Havells b) LED MAKE PHILIPS / SAMSUNG/LG" etc., complete as directed by site in-charge.

Supply and Transportation of 48" (1200mm) Sweep 5 star rated Ceiling Fan, with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes: Crompton /Havells/Orient etc. complete as directed by site in-charge.

Supply and fixing of Modular type 2-Module, Electronic fan regulator hum free step type socket size in the existing switch board. Makes:-Legrand/GM/ Gold medal/ Million etc., complete as directed by site in-charge..

Labour charges for fixing of ceiling fan including transportation and giving connections with 23/0060 size, 3 core round flexible copper wire leads of make Finolex / Havells// Goldmedal/GM etc., complete as directed by site in-charge.

Supply and erecting 19/20mm steel tube down rod of 0.75 mt length with bolts & nuts duly painted with matching colour of fan etc. complete as directed by site in-charge.

Supply and Fixing of 45W LED Street light Luminaire made of pressure die cast aluminium body with powder coated, having protective toughened glass, supply Input voltage 120-270 V AC, P.F>0.90, high power LED's having system efficacy>120 lm/W and junction temperature<70°C, with Ingres protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution, THD< 10% at 110 Volts AC, driver efficiency >90%, CCT:3000K-5700K, minimum CRI>70, etc., complete including fixing of luminaire on wall/Pole with 1.0mt of 25mm dia Gl pipe bracket and anti-tilting MS flat, 3 core 1.5 Sq.mm sheathed flexible round copper cable including all labour charges and giving connections etc., complete with 5 years warranty. a) Luminaire make: Philips / Bajaj / Havells(b) LED make: Philips /LG LEDs etc. complete as directed by site in-charge..

Supply and Run of 1 of 10 Sq.mm WPTC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., Makes: Gold Medal / Million etc., complete as directed by site In Charge.

Supply, laying, testing and commissioning of 4-pair, Cat-6 Solid (Third party ETL Intertek tested 600 MHZ above) to support 1Gbps with Cross (+) filler pair separator & PVC sheath 23 AWG, UTP Cable, Meets or exceeds ANSI/TIA-568-C.2 and UL Listed &RoHS Compliant in the existing raceways/pvc conduits including making connections to information outlets and patch panels with ferruling at both ends for identification with necessary tools for punching stripping crimping and testing required etc., complete. Makes: Systimax/AMP etc., Complete as directed by site in-charge.

Supply and erection of MS Galvanised fan hook box with hook in RCC slab including Labour charges and all applicable taxes etc. complete as directed by site in-charge.

LINGAM RAVI KIRAN (BID ID -3260472)