REWIRING AND REPAIRS TO FITTINGS FIXTURES OF MD OTM ACCN OF CERTAIN UNITS AT KLP OF WEST AREA UNDER GE DEHU ROAD

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, light fittings, MCB DBs,out let boxes etc and removing materials for taking credit and making good disturbed surfaces of walls, floors, ceilings etc all as specified.

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and sheathed cable 1100 V grade conforming to IS 694 drwan through PVC conduit of suitable size heavy grade ISI marked including necessary conduit accessories, sunken type pressed steel terminal boxes with plastic laminated sheet of approved shade 3mm thick including 1.5 Sqmm PVC insulated FRLS copper conductor as in continious earth wire for : (a) One Light/Bell point controlled by one switch .

(b) One ceiling / Exhaust fan point controlled by one switch

(c) One Light point controlled by two-way switch .

(d) One 3 pin 5 Amps socket out let on independent board

(e) One 3 pin 5 Amps socket out let on the same board

Ditto-All as per item NO-2 above but with 4 Sqmm wire for 15 Amp socket outlet on independent board

M&L for casing capping point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and sheathed cable 1100 V grade conforming to IS 694 drwan through PVC casing capping of suitable size heavy grade ISI marked including necessary casing capping with accessories, heavy duty PVC terminal including 1.5 Sqmm PVC insulated FRLS copper conductor as in contineous earth wire for: (a) One Light/Bell point controlled by one switch .

(b) One fan point controlled by one switch

(c) One Light point controlled by two-way switch .

(d) One 3 pin 5 Amps socket out let on independent board

(e) One 3 pin 5 Amps socket out let on the same board

Ditto-All as per item NO-8 above but with 4.0 Sqmm wire for 15 Amp socket outlet on independent board

M&L for repairs to the point wiring of any type (light, fan, socket or power) after taking down the unserviceable cashing/conduit/wire and reconnection/relaying in the same place and also make good the distrubed surfaces all as directed.. Note: Necessary cable/casing/conduit for wiring will be measured and paid seperatebly in respective items.

Taking down carefully by unscrewing from boards/outlet boxes,fittings and fixtures such as switches,sockets,celling roses,lamp holders,brackets,ceilling fittings,bulkhead fittings,tube light fittings and regulators, etc for reuse at site or removing materials for taking credit (To be measured only if found serviceable)

Taking down the unserviceable internal electrical fittings and fixtures from the switch board and replace it with the new items in existing position including testing after repairs complete all as directed. Note: (a)Necessary spare,fitting, will be measured in respective items. (b) Necessary tools,ladder ,safty equiptment for electrician will be arranged by the contractor at his own cost.

Supply only Modular switch 1 way 6A,1 module, 220V. Make : Legrand/MK/Crobtree

Refixing after repairing Modular switch 1 way 6A,1 module, 220V of any type as obtained from item No-15 here in before.

Supply only switch piano flush button single pole one way 6 Amps, 220 V. Make : Legrand/Crobtree/Havells

Refixing after repairing Piano type switch 1 way 5 A, 220 Vof of any type as obtained item No-15 here in before.

Supply only Modular socket 6A-2/3 pin combined 2 modules flush type 220 V. Make : Legrand/MK/Crobtree.

Refixing after repairing Modular socket 6A-2/3 pin combined 2 modulas flush type 220 V

Supply only socket outlet 2 in 1,3 pin,6A flush type 220 V . Make : Legrand/MK/Crobtree.

Refixing after repairing socket outlet 2 in 1,3 pin,6A flush type 220 V as obtained item No-15 here in before.

Supply only for repairing Modular switch 2 way 6A,1 module, 220 V. Make : Legrand/MK/Crobtree.

Supply only for repair Modular Bell Push 6A,1 Module single pole 220 V. Make:Legrand/Crobtree/Havells

Supply only for repair Bell Push flush type,5A,single pole 220 V. Make:Legrand/Crobtree/Havells

Supply only switch piano flush button single pole Two way 6 Amps, 250 V Make : Legrand/MK/Crobtree.

Supply only Modular socket combination 6A/16A-2/3 pin combined 2 modules flush type 220 V . Make : Legrand/MK/Crobtree.

Supply only Modular switch combination 6A/16A-2/3 pin combined 2 modules flush type 220 V . Make : Legrand/MK/Crobtree.

Supply only socket 6A/16A-2/3 pin combined flush type 220 V . Make : Legrand/Crobtree/Havells

Supply only switch outlet 2 in 1,3 pin,5A and 15Amp combined flush type 220 V . Make : Legrand/Crobtree/Havells

Supply only for repairing Ceiling rose surface bakelite of 65mm x 50mm size with two to three terminals. Make : Legrand/Crobtree/Havells

Supply only switch socket combination 2 in 1,3 pin,6A flush type 220 V . Make : Legrand/Crobtree/Havells

Supply only Modular Switch socket combination16A, 6 pin, 3 module flush type 220 V . Make : Legrand/MK/Crobtree.

Supply only Modular Switch socket combination multipurpose 3 pin,16 Amp and one pin 6 Amp controled by one switch flush type 220 V . Make : Legrand/MK/Crobtree.

Supply only Switch socket combination 2 in 1,3 pin,6 and 16 Amp flush type universal type 220 V. Make : Legrand/Crobtree/Anchor Roma

Supply only Modular fan regulator stepped type Electronics flush type as per existing 120 watts, 220 volt, 2 module and connecting complete all as specified and directed . Make : Legrand/MK.

Supply only Electronics dimmer piono switch type 450 watts,220 volt flush type all as specified and directed . Make : Legrand/MK.

Supply only Modular white cover plate with frame suitable for 1 module. Make : Legrand/MK

Supply only Modular white cover plate with frame suitable for 3 module. Make : Legrand/MK

Supply only Modular white cover plate with frame suitable for 4 module. Make : Legrand/MK

Supply only Modular white cover plate with frame suitable for 6 module. Make : Legrand/MK

Supply only Modular white cover plate with frame suitable for 8 module. Make : Legrand/MK

Supply only Modular Metal flush box suitable for 1/2 module. Make : Legrand/MK

Supply only Modular Metal flush box suitable for 3 module. Make : Legrand/MK

Supply only Modular Metal flush box suitable for 4 module. Make : Legrand/MK

Supply only Modular Metal flush box suitable for 6 module. Make : Legrand/MK

Supply only Modular Metal flush box suitable for 8 module. Make : Legrand/MK

Supply only PVC rectangular block for mounting switches,sockets, fan regulator, etc with 3mm thick plastic laminated sheet cover of size 100 mmx 100mm and 50mm deep.

Supply only PVC rectangular block for mounting switches,sockets ,fan regulator, etc with 3mm thick plastic laminated sheet cover of size 175 mmx 100 mm and 50mm deep.

Supply only PVC rectangular block for mounting switches,sockets, fan regulator, etc with 3mm thick plastic laminated sheet cover of size 200 mmx 150mm and 50mm deep.

Supply only PVC rectangular block for mounting switches,sockets, fan regulator, etc with 3mm thick plastic laminated sheet cover of size 250 mmx 200mm and 50mm deep.

Supply only PVC Casing Caping insulated of size 20x12mm type-D of Standard Length: 2 metres conforming to IS

Supply only buzzer, Ding Dong type, AC 230 volts single pole. Make.Legrand/MK/Havells

Supply only bell multimusic type, AC 230 volts single pole, Make.Legrand/MK/Havells

Supply only for repairing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings. Make.Legrand/MK/Havells

Taking down unserviceable sub main wiring of any size complete and making good the disturbed surfaces of walls/floors, etc complete as specified.

M & L for submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 4 sqmm (nominal area) drawing through PVC coundit consealed and 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly all as specified. (Note : Cutting chases for counduit and sinkings for boxes and making good to walls, floors etc for sub main wiring will be measured & paid separately in respective items).

All as per item no 59 herein before but of size 2X2.5 sqmm and 1X2.5 sqmm all as specified.

M & L for submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 2.5 sqmm (nominal area) drawing through PVC capping casing and 2.5 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly all as specified. (Note : Cutting chases for counduit and sinkings for boxes and making good to walls, floors etc for sub main wiring will be measured & paid separately in respective items).

All as per item no 61 herein before but of size 2X 4 sqmm and 1X4 sqmm all as specified.

All as per item no 61 herein before but of size 2X6 sqmm and 1X6 sqmm all as specified.

Repair only the sub main wiring of any type ( power) after taking down the unserviceable cashing/conduit/wire and reconnection/relaying in the same place and also make good the distrubed surfaces all as directed. Note: Necessary cable/casing/conduit for submain wiring will be measured and paid seperately in respective items.

Supply only PVC insulated and unsheathed cable of size 1.5 Sqmm single core multistranded copper conductor FR cable 1100 V grade conforming to IS 694 . Make : Polycab/Finolex

Supply only PVC insulated and unsheathed cable of size 2.5 Sqmm single core multistranded copper conductor FR cable 1100 V grade conforming to IS 694 . Make : Polycab/Finolex

Supply only PVC insulated and unsheathed cable of size 4.0 Sqmm single core multistranded copper conductor FR cable 1100 V grade conforming to IS 694 . Make : Polycab/Finolex

M & L for single core PVC insulated unsheathed stranded copper conductor cable of 6 sqmm (nominal area) drawing through existing submain coundit/Casing capping 1100 volts grade and connecting with main earth dolly all as specified & directed. Make : Polycab/Finolex

Taking down unserviceable LED light fittings of any type from wall/ceilling & replace it with new fittings for repair and refixing in the same location. Note: Necessary Driver will be measured and paid seperatebly in respective items.

Repairs to the LED TL 18/20 Watt with Driver 5 W/18 W

Repairs to Driver for LED Ceilling light 2x 36/40 watt

M&L for Decorative surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, environmental friendly, energy efficient ready 18 W LED 6500 K . Make:-Havells/Bajaj/Philips

M&L for Decorative wall light made up of high grade engineering plastic material suitable for 9 W LED lamp, B22 base Lamp Type with 9 W LED Lamp. Make:-Havells/Bajaj/Philips

M&L for Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp, B22 base with 9 W LED Lamp. Make:-Havells/Bajaj/Philips

M7 L for Ultra Slim recess mounted EdgeLit LED module with high brightness LED package and Unique pattern acrylic de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling of Fixtures size 295x295x70 mm (LxWxH) of 36W LED complete all as specified. Make:-Havells/Bajaj/Philips

M&L for Slim recess mounting luminaire with high performance LED 36 watts, suitable for mounting with Armstrong/Grid ceiling (35mm height) ST Denotes : Steel Frame, PO Denotes : Special Unibody Jointless Polymeric Frame Fixture of size 595x595x65 mm (LxWxH) complete all as specified. Make:-Havells/Bajaj/Philips

M&L for Track mounted LED light 15 watt with modern design, compact size with High power COB LED to provide focussed light. (Track light is a method of lighting where light fixtures are attached anywhere on a continuous track rail which is electrically charged as compared to the need of routing electrical wiring to individual light position) complete all as specified. Make:-Havells/Bajaj/Philips

M&L for Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours complete all as specified. Make:-Havells/Bajaj/Philips

Taking down unserviceable DB/MCCB/MCB of any capacity and making good the disturbed surfaces of wall/floor complete all as specified all as directed.

S & F Loadline Distribution board, TP&N vertical with Bus bars,Netural links,blanking plates ,single door 12 way with provision for MCCB as incommer and SP/TP MCB as outgoing and electrically connecting up complete all as specified and directed. Make : Havells/L&T/Legrand

S & F Distribution board, SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 8 way with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed. Make : Havells /L&T/Legrand.

S & F Distribution board, SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 12 way with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed. Make : Havells / L&T/Legrand.

S & F MCB SP 6 to 32 Amps 240 volts 50 HZ ,10 KA complete. Make : Simens / Legrand.

S & F MCB SPN 40 Amps 240 volts 50 HZ , 10 KA complete. Make : Simens / Legrand.

S & F MCB DP 63 Amps 240 volts 50 HZ , 10 KA complete. Make : Simens / Legrand.

S & F MCB TP 40 Amps 240 volts 50 HZ ,10 KA complete. Make : Simens / Legrand.

S & F MCCB TPN, 415 Volt AC 50HZ, 100 -100 Amps adjustable braking capacity 18KA complete all as specified & directed. Make : Simens / Legrand.

M & L for cutting through concrete channels,grooves or rebates n.exc. 15cm grith and trimming surface and make good the damage portion match with existing surface for laying any size pipe line all as specified and directed.

Taking down unserviceable and dislocated earthing conductor strip of any type from wall/floor/roof/ inter connection grid of any size all as directed

Refixing the serviceable copper strip in the existing location after necessary repairs all as directed. Note-Copper strip shall be jointed through brazzing only

Refixing the serviceable GI strip in the existing location after necessary repairs all as directed. Note-GI /Copper strip shall be jointed through brazzing only

Supply and fix in replacement copper strip of size 20x3 mm as roof conductor and down conductor till test point all as directed. Note-Copper strip shall be jointed through brazzing only

Supply and fix in replacement GI strip of size 25x4 mm as roof conductor and down conductor till test point all as directed. Note-Copper strip shall be jointed through brazzing only

S&F in replacement Porcelain insulators for fixing Copper strip on wall / roof bldg with necessary screws, washers and nut bolts, etc all Specified . Note - Qouted Rates shall be inclusive of copper screws with washers for fixing copper strip on Porcelain insulator with minimum size 1 inch and maximum size 1.5 inch with max external dia of screw is 8mm and 2 nos of GI nut for fixing insulator on wall all as per site requirments & all as directed.

Taking down unserviceable and dislocated air termination rod of any type & size from floor all as directed.

Refixing the serviceable copper air termination rod in the existing location after necessary repairs all as directed. Note- strip shall be jointed on air termination rod through brazzing only

Supply and fix in replacement of single pointed soild copper rod 300mm long and 12mm dia fixed on suitable flat mounted plate and connected with roof/down conductor all as directed

M&L for earth pit chember of size 0.6mx0.6mx0.6m made with PCC 1:2:4 type B-2 including HDPE earthing pit cover, inspection chember of size 200 mm depth x 300mm length x 300mm width complete all as directed

Supply and laying GI pipe medium grade of size 20mm including necessary fittings all as directed

M&L for periodical testing and measuring the earth resistance value of the existing earthings / Down conductor / air terminal by means of wheat stone bridge method after disconnecting the earth continuity conductor from the test point , applying secondary voltage across the terminals, maintaining proper record of the measurement in presence of the users rep, MES rep, submitting the test records, pouring saline water in the earth pit to achieve low earth resistance, observing the same complete for monthly/Quarterly/Half yearly for L2/L3 eqpts/E&M installations/Lightning arresters test all as directed by Engineer-in Charge at site.

M&L for repairs to existing Meter Box after necessary taking out the all MCB and Meter complete and removing the brocken glass and supply & fixing the 3mm transperent Fiber sheet and necessary fixing arrangements, including painting all as directed

S&F indicator lamp

M&L for Electric meter 10-60 Amps single phase complete. Make: L&T/HPL

M&L for PVC Earth pit cover.

S&F PVC Cable Junction Boxes IP 66 with metric knockouts for cable entry suitable for 10-16 sqmm size.

S&F Cable Junction Boxes IP 66/67 “weather proof” for outdoor installation (with knockouts for cable entry - Black colour ) all as directed.

S&F Integrated all-in-one solar street light with lithium Ferrophosphate battery, solar panel and charger built into the luminaire. Pressure dies cast aluminum for sturdiness and long life, Specially designed pole mounting bracket allows different tilt angles, lateral and pole top mounting, SunStay has highest ever system efficacy of more than 175 lm/W offgride model No-BRP710 LED20 CW MR S1 12V LFP AIO Solar Equip IN -with Sensor-HSNH94055040. Make -: Philips

M&L for Brazzing of copper earth strip 20/25/32 mm as available at site and reconnected properly all as directed.

Taking down unserviceable ceiling fan and deposited to MES store yard and Supply & fixing ceilling fan complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC of size) 4-10 sq.mm

Taking down unserviceable Exhust fan and deposited to MES store yard and Supply & fixing Exhust fan made with sturdy engineering plastic complete and accessories, 230 volt,50 Hz, 1200 rpm copper winding of sweep 250mm.

Taking down the ceilling fan/wall mounted fan, Exhust fan from ceilling/wall, cleaning the dust, dirt, greassing, serviceing, repairing and refixing in the original positin all as directed. Note:- Necessary spare for repairing shall be measured and paid in respective items.

Taking down unserviceable/Serviceable ceilling fan/wall mounted fan,exhust fan of any capacity or size and rewinding, refixing in the same location and unserviceable fan shall be deposited to MES store yard all as directed.

M&L for Re-winding ceilling fan with super enameled copper wire of suitable gauge to get designed condition of speed for the particular make of fan including insulating, varnishing, providing sleeves to copper wire and testing for good running condition of sweep1200 mm , 220 volt , 50 HZ, single phase, as obtained from item No 112 her in before all as directed

M&L for Re-winding Exhust fan with super enameled copper wire of suitable gauge to get designed condition of speed for the particular make of fan including insulating, varnishing, providing sleeves to copper wire and testing for good running condition of sweep 300 mm, 220 volt, 50 HZ,single phase, as obtained from item No-112 her in before all as directed.

M&L for Re-winding wall mounted fan with super enameled copper wire of suitable gauge to get designed condition of speed for the particular make of fan including insulating, varnishing, providing sleeves to copper wire and testing for good running condition of sweep 400 mm, 220 volt, 50 HZ, single phase, as obtained from item No-112 her in before all as directed

Supply only Gun metal bush suitable for particular make of fan of 1200mm sweep complete all as directed.

Supply only Gun metal bush suitable for particular make of exhaust fan of 400 mm sweep complete all as directed.

Supply only ball bearing suitable for particular make of fan of 1200 mm sweep complete all as directed. Make - NBC/Tata/SKF

Supply only ball bearing suitable for particular make of exhaust fan of sweep 300mm/450 mm complete all as directed. Make -SKF/NBC/SKF

Supply only condenser 2.5 /3.5 Mfd capacity. Make :Havells/HPL/ Asian.

S& F LED Lamp 10 Watt , Lumen Output-950, Color Temp (K) (lm)-6500K.Complete all as directed. Make :Havells/HPL/Asian.

S& F New generation, post-top 25 watt, energy saving, environmental friendly, long life aesthetically designed with Symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source Model:- RUBYPT25WLED757PSYMTOPC. Make: Havells/Bajaj

S& F Symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source Model:- RUBYPT25WLED757PSYMTOPC. Make: Havells/Bajaj

Om Sai Enterprises

SHAILENDRA B TULSANI

Santhi Enterprises