E Tender No 70/EDC(Kashipur)/2023-24

Supply Item

Supply of L.T Connectors PG Clamp L-DB 120 sq mm to 25 sq mm. (As Per Specification & Drawing of UPCL)

Supply of Earth wire clamp made of M S Flat for SP-55 duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of PP & clamp made of M S Flat for SP-55 duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of PP & clamp made of M S Flat for SP-33 duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of PG Clamp Alu Alloy Dog to Dog conductor made of best Quality Pore Line and without Defeets ISI Standard with Nut and Bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of Suspension Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of Stay clamp for SP Pole duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of Bracing clamp for SP-33 Pole duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of PG Clamp Alu Alloy Rabbit to Rabbit conductor made of best Quality Pore Line and without Defeets ISI Standard with Nut and Bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of Earth wire clamp made of M S Flat for SP-33 duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of M.S Clamp for Dead End Clamp with nut and bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of Dead End Clamps With I Hook. (As Per Specification & Drawing of UPCL)

Supply of Nut Bolts (100x20 mm) (As per Specification of UPCL.

Supply of Shear Head type Insulated Piercing Connector body moulded from high quality mechanical Climate and UV resistant glass reinforced polyamide hot dipped galvanized bolts & contact teeth ABC size 125 Sq mm to 25 sq mm. MAKE- (TYCO/RPG/3M/SICAME/ENSTO)

Supply of GI Pipe 6 Mtr Long (as per IS Norms)

Supply of Bracing clamp Top for SP-55 Pole duly Red Oxide Painted with Nut and Bolts and washer. (As per Specification & Drawing of UPCL)

Supply of M.S Clamp for Suspension Clamp with nut and bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of LT Distribution box holding clamp with nut and bolts and washer. (As Per Specification & Drawing of UPCL)

Supply of SMC Three Phase L.T. Distribution Box for connection of LT consumer With in built Panel Lock with key, Al bus bar RYB 25x6 mm & Al bus bar N 40x6 mm. MAKE- (SINTEX/Other IS Complied Reputed Company)

Supply of HDPE Pipe (140 mm). (As Per Specification & Drawing of UPCL)

Supply of MCCB Distribution Box with LT Distribution Box 400A. MAKE- (IS Complied Reputed Company)

Supply of MCCB with Accessories 630 KVA W/O Box. MAKE- (IS Complied Reputed Company)

Supply of MCCB Distribution Box 400 KVA. MAKE- (IS Complied Reputed Company)

Supply of MCCB 4 Pole 100 Amp. MAKE- (IS Complied Reputed Company)

Supply of 125 Amp MCCB 4 Pole. MAKE- (IS Complied Reputed Company)

Supply of MCCB 4 Pole 200 amp. MAKE- (IS Complied Reputed Company)

Supply of Aluminium Crimpping Lug Size 150 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As Per Specification & Drawing of UPCL)

Supply of Aluminium Lug Size 95 sq mm. (As Per Specification & Drawing of UPCL)

Supply of Aluminium Lug Long Barrel Size 630 sq mm. (As Per Specification & Drawing of UPCL)

Supply of Aluminium Crimpping Lug Size 400 sq mm made of best Quality Pore Line and Without Defeets ISI Standerd. (As Per Specification & Drawing of UPCL)

Supply of Aluminium Lug Size 25 sq mm. (As Per Specification & Drawing of UPCL)

Pole/Line/TF & Other Work

Cartage of the following material from store centre Kashipur/Rudarpur/ Haldwani by private truck including safely loading, unloading proper stacking at road/worksite. Complete in all respact. approximate distance (0-20 KM)

PCC Pole

ST Pole SP-33

ST Pole SP-55

Other Small Line Material with Conductor

16/25 KVA DTR

63 KVA DTR

100 KVA DTR

250 KVA DTR

400/500 KVA DTR

630/1000 KVA DTR

Providing and Installation of Chemical Earthing of distribution transformer including digging of pit of size 2.5Mtr depth and make hole of size 150mm. Placing of earthing electrode (to be supplied by contractor as per upcl norms connecting the same with GI strip (to be supplied by contractor) of size 35X6 mm as per norms minimam length 6M, treated of soil with highly conductive substance in all respect, result of earthing resistance to be recorded before abd after instollation of earthing. The earth resistance after earthing should be less then 1Ohm. Each Transformer by 2 No (1No for Neutral and 1No for Body)

Erection of M.S. earthing rod 20×2500 mm for earthing of support as per RESPO drawing No. RES-12 including digging earth rod 0.3 m deep below ground level connected to support with earth wire 16 swg fixing of all accessories in all respect as per Specification of UPCL.

Fabrication of Single Pole, Double pole Straight Cross arm T off Top and Dropper, Brecing Channel of M.S. Channel & M S Angle mm Cutting and Holling Complete Work as per Specification of UPCL.

Excavation of earth for Stay pit of size 0.6x0.6x1.2 mtr in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Fixing, Erection of 11 KV Stay Set with pole and stay rod on required tension as per drawing / RESSPO manual.

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of Following Pole Structure after digging of pit size 0.6×0.6 mtrs & 1/6 length of support on 300×300×75 mm stone pad including fixing with all accessories complete in all respect as per Specification of UPCL.

Single Structure of PCC Pole

Single Structure of ST Pole SP-33

Single Structure of ST Pole SP-55

Double Structure of ST Pole SP-55

Grouting of pole in size 0.45x0.45x1/9 of the support in CC ratio 1:4:8 (1 cement : 4 graded stone 20 mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO construction Manual.

Muffing of poles of size 45 cm above ground level with CC ratio 1:4:8 (1 cement : 4 graded stone 10mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO construction Manual.

Dismantling of Following Pole Structure complete in all respect as per Specification of UPCL.

Single Structure of PCC Pole

Single Structure of ST Pole SP-33

Single Structure of ST Pole SP-55

Double Structure of PCC Pole

Double Structure of SP-33

Double Structure of SP-55

Double Structure of Rail Pole

Dismantling of Following HT Line complete in all respect as per Specification of UPCL.

11 KV Line in weaseal

11 KV Line in Dog

Dismantling of Following DTR Structure complete in all respect as per Specification of UPCL.

25 KVA DTR

63 KVA DTR

100 KVA DTR

250 KVA DTR

400 KVA DTR

630 KVA DTR

Painting of following steel tubular poles with two coats of Aluminum paint Berger Luxol quality over one coat of red oxide primer and P.O. red on top above guarding angle in all respect as per Specification of UPCL.

ST-SP-33 Pole

ST-SP-55 Pole

Laying of LT PVC Cables up to 150 Sqmm.

Laying of LT PVC Cables above 150 Sqmm.

Laying of under ground LT Cable in Trench complete in all respect.

Laying of under ground 11 KV Cable in Trench complete in all respect.

Construction of Transformer Plinth with size 2x2x1.1 meter above ground level and 0.6 mtr below level including the cost of material such as cement brick, ballast, sand etc complete work and tests as per standard.

Cement Concreting work on DTR Plinth

Brick work in 1:4 Ratio DTR Plinth

Cement Plaster on DTR Plinth

Providing and fixing of wire mesh of size 50x35mm around plinth and toe wall duly welded with frame of MS angle iron 35x35x6 mm and strip of size 35x6 mm in mid of each side along with wire mesh (width of wire mesh 1.5 meter) with the height of 0.5meter above the plinth 2meter above the toe wall with 01No gate and locking arrangement in the toe wall size including grouting of 6Nos, legs in the ratio in block of size 0.25x0.25x0.45 meter including gravilling of single of size 20 to 40 mm and complete painting of wire mesh with aluminium. paint with two coat. (including the cost of cement and all material)

Mounting and Installation of of following Capacity Transformer/Plinth/Double Pole Structure with the help of Chain Pulley/Crain Depending upon the nature of Job at work complete in all respect and Energisation of Transformer

25 KVA DTR

63 KVA DTR

100 KVA DTR

250 KVA DTR

400/500 KVA DTR

1000 KVA DTR

Mounting and Fixing of Fuse set on D/P including fixing with all accessories complete in all respect as per Specification of UPCL.

Fixing of Lightning Arrestor complete in all respect as per Specification of UPCL.

Erection of Bracket in 11 KV Line

Laying, Stringing and sagging of HT line including fixing of all accessories complete in all respect as per specification of UPCL.

ACSR Rabbit Conductor

ACSR Dog Conductor

T-off Connection complete 11 KV Line

Laying of LT AB Cable including fixing of all accessories complete in all respect as per specification of UPCL.

Disconnection and Reconnection of Consumer

Dismantling and Re-Installation of Street Light

Dismantling of AB Cables

Digging of Pit Through Hammer at CC, DAM

Back Cartage of Petty Material 0-20 KM

Installation of MCCB With Box at DTRs

Laying of O/H 11 KV Cable 3Cx150 Sqmm

Installation of ACB LT Distribution Box.

Dismantling & Relaying of 11 KV AB Cable

Fixing of 11 KV Termination Kit For AAAC CC

SHIKHAR ENTERPRISES