Repair works in room at fire Hydraulics Lab in CSIR-CBRI

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour : Old work (Two or more coats)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing to be paid for separately) :For fixed portion, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing aluminium handles, ISI marked, Powder coated, required colour or shade, with necessary screws etc. complete : 125 mm

Providing and fixing aluminium tower bolts, ISI marked, Powder coated,required colour or shade, with necessary screws etc. complete : 150x10 mm.

Demolishing brick works including stacking of serviceable materials and disposal of unserviceable materials with in 50 mtr lead in cement mortar

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping groundwithin 50 metres lead :With cement mortar 1:4 (1 cement : 4 fine sand)

Finishing wall with Premium Acrylic smooth exterior paint with silicone additives of required shade on old work– two or more coats applied @ 0.83 litre per 10 sqm over existing cement paint surface.

Providing and fixing vertical venation blinds(Regular) 100mm size of MAC or equivalent in required colour as approved by the Engineer-in-charge complete in all respect including operating sysyem, carriage and wastage etc. complete in all respect at site as per direction of engineer in-charge.

Wiring for light Point /fan point /exhaust fan /call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit with modular switch of Legrand Myrius/ Havells crabtree Athena make ISI marked, modular plate suitable G.I Box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable Havell’s/ Finolex/Polycab/ KEI make including ceiling rose,etc as required. Group C

Wiring for circuit /sub-main wiring along with earthwire with the following size of FRLS PVC Insulated copper conductor single core cable of Havell’s/ Finolex / Polycab make ISI Marked in surface/ recessed steel conduit as required

2 x 4 sq mm + 1 x 4 sq mm earth wire

2 x 6 sq mm + 1 x 6sq mm earth wire

Supplying and fixing Following Modular Switch/ Socket on the existing modular plate and switch box of Havell’s /Legrand make ISI marked including connection but excluding modular plate etc. as required.

5/6A Switch

15/16 A switch

5pin 5/6 A Socket Outlet

6pin 15/16 A Socket Outlet

Supplying & Fixing of modular blanking plate on the existing modular plate & switch box excluding modular plate. As required.

Supplying & Fixing following size / modules, GI box of Havells / L&T make ISI marked alongwith modular base & cover plate for modular switches in recess etc. as required.

8 Module (125mm×125mm)

12 Module (200 mm×150mm)

Supplying and fixing of Wall Mounted Fan 400mm sweep for Orient/Havells/ Bajaj/ Philips or its equivalent make.

Supplying and fixing of 50W Gleam LED Flood Light-CDL IP66 rating for Crompton/ Havells/ Bajaj/ Philips or its equivalent make.

Supplying and fixing of 30W LED batten square light of Havells/ Orient/ Philips or its equivalent make.

S/F following rating, double pole, 240V isolator in the existing MCB DB complete with connections testing and commissioning etc. as required: 63A

Supplying and fixing 2 + 6 way,double door single pole and neutral, sheet steel, MCB distribution board, Havells/ Legrand/ L&T, 240V make on surface/ recess, complete with tinned copper bus bar,Neutral bus bar, Earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator)

Supplying and fixing 5A to 32A rating, 240V/415V , 10kA,"C" curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required: 16A SP 02 MCB & 32A SP 04 MCB

Supplying and Fixing 32A, 240V ,SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 32A "C" curve, SP,MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. of Havells make or its equivalent of Legrand/ L&T Make.

Please Enable Macros to View BoQ information