IIP-Maintenance and upkeep of Division office at Angamaly for the year 2024-25

Amount

MAINTENANCE AND UPKEEP

OD16558/2024-2025:Engaging labour for various works inside IIP office compound.( periodical clearing of grass /jungle, cleaning of drain, ground water tank, over head water tank, compound wall strut cutting, and other general works)

50.2.33.5:Cutting branches of trees overhanging above any structures of girth between 40cm to 60cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete.

OD42496/2023-2024:Engaging plumber for repairing sanitary works and all other incidental charges etc complete

OD42497/2023-2024:Engaging carpenter for rectifying furniture & easing of doors and windows

OD16928/2024-2025:Supplying and fixing of PVC toilet doors including frames, necessary hinges, tower bolt, handle and all.

9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm

9.101.2:Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

OD16652/2024-2025:Providing and fixing office name board of size 2.4m X 0.90 m made out of 3mm thick ACP sheet of required colour approved by Engineer-in-charge. Letters, symbols, borders etc. shall be of vinyl sticker fixed on the board as per approved design. Board shall be fixed rigidly to the RCC/Masonry/ Structural steel framework of building structure using stainless steel anchor fastners /bolt/gum of required size. The rate shall include cost of all material, Labour and scaffolding charges

OD16763/2024-2025:Supplying name board 4mm thick PVC with HP latex vinyl /print name/designation board of size 0.5 x 0.3 over wall / partition/ table as per the instruction of engineer in charge

OD3067/2024-2025:1.50 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 1.50.1 Upto 450 mm sweep

OD3068/2024-2025:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

OD3069/2024-2025:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A

14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface

OD16564/2024-2025:Supplying of 40 cm dia PVC cover for sintex water tank,

12.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter

12.42.1.1:Coupler75 mm

OD16931/2024-2025:Providing and fixing half swing door shutter of size 1.20m X 0.80m using 12mm thick prelaminated particle board with mild steel double action spring hinges(100mm) with necessary screws all complete as per the direction of the Engineer in Charge.

OD16654/2024-2025:Engaging electrician for various work

50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD16933/2024-2025:Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished machine cut single piece granite slab for kitchen platform of required size and shade over structural steel frame work all complete.

8.3.2:Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work

OD17161/2024-2025:Supplying of stainless steel kitchen sink with drain board and all accessories such as stainless steel sink cock, waste coupling, connection hose, drain hose and necessary screws. Kitchen sink with drain board of size 510 x 1040 mm bowl depth 178 mm

REPAIR AND MAINTENANCE OF ROOFING

OD16116/2024-2025:Engaging labour for scrapping and cleaning of roof top and prepare surface free from algae before the application of water proofing cement paint.

14.64.1:Finishing walls with water proofing cement paint of required shade:Old work ( one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat

22.23A:Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

OD16578/2024-2025:Providing and fixing 0.50 mm TCT Precoated galvanised flashing for FF toilet ventilator

OD16119/2024-2025:Engaging scavenger for removing waste materials from Toilets, Office compound, Roof top and disposal of the same as per the direction of department officers at site.

Bidder Name

P O Thomas