REPAIRS AND PAINTING/ POLISHING TO VARIOUS TYPES OF STEEL/ WOODEN AND TP FURNITURE AT VARIOUS UNITS AT INS VALSURA, JAMNAGAR

Amount

Notes applicable to all items of BOQ :- (i) Removal of following existing unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discarded components as mentioned including tightening the joints, placing every part in-tact as applicable as per drgs. (ii) Work shall be executed where the furniture exist in different User Units of GE (I) Navy Jamnagar including BSO's Furniture Yard as directed by Engineer-in-Charge. (iii) Unless otherwise specified, all new exposed Wooden surfaces shall be finished with French Polish and quoted rates of respective items shall be inclusive of this provision. (iv) Unless otherwise specified, all new steel surfaces shall be painted with two coats of synthetic enamel paint of approved tint over a coat of zinc chromate primer and quoted rates of respective items shall be inclusive of this provision. (v) Unless otherwise specifically mentioned, all new Wood shall be 1st Class Hard wood (Teak).

1.00 Almirah Large Steel: Drg No. FD-1031, FD-67(M) Removing old unserviceable 6 Lever Lock and S&F new 6 Lever Lock with Duplicate Key as shown in drg.

Removing old unserviceable handle and S&F new handle 150mm long as shown in drg.

Removing old unserviceable hinges and S&F new hinges as shown in drg.

Removing old unserviceable Leg and S&F new Leg of Almirah Large Steel as shown in drg.

Removing of unserviceable shelves and S&F new shelves all as shown in drg.

Removing old unserviceable Locking assembly with iron plate & 02 rods 10mm dia & lock cover and S&F new locking assembly set as per drg.

Refixing loose shelves with spot welding of broken joints not exceeding 25mm in length.

Removing unserviceable existing door shutter of almirah large with shelves steel made out of PBI sheet 1mm thick complete as shown in drg.

2.00 Almirah Small Steel & Almirah Med Steel: Drg No. FD-67(M), FD-1032 Removing old unserviceable 6 Lever Lock and S&F new 6 Lever Lock with Duplicate Key as shown in drg.

Removing old unserviceable handle and S&F new handle 150mm long as shown in drg.

Removing old unserviceable hinges with S&F new hinges as shown in drg.

Removing old unserviceable Leg and S&F new Leg of Almirah Small Steel as shown in drg.

Removing old unserviceable Locking assembly with iron plate, 02 rods 10mm & lock cover and S&F new locking assembly set complete of Almirah Small Steel as per drg.

Refixing loose shelves with spot welding of broken joints not exceeding 25mm in length.

Removing of unserviceable shelves and S&F new shelves made out of 1 mm thick PBI sheet as per existing of size 650 mm of almirah medium with shelves complete all as per drg.

Removing unserviceable existing door shutter of almirah medium steel made out of 1 mm thick PBI sheet complete all as per drg.

3.00 Almirah Large Steel 1/2 Hanging & 1/2 Shelving : Drg No. FD-1033 Removing old unserviceable 6 Lever Lock and S&F new 6 Lever Lock with Duplicate Key as shown in drg.

Removing old unserviceable handle and S&F new handle 150mm long as shown in drg.

Removing old unserviceable hinges and S&F new hinges as shown in drg.

Removing old unserviceable Leg and S&F new Leg of Almirah Large 1/2H & 1/2S Steel as shown in drg.

Removing of unserviceable shelves of Almirah Large Steel 1/2 Hanging & 1/2 Shelving and S&F new shelves of Almirah Large Steel 1/2 Hanging & 1/2 Shelving all as shown in drg.

Removing old unserviceable Locking assembly with iron plate, 02 rods 10mm dia & lock cover and S&F new locking assembly set complete of Almirah Large Steel 1/2 Hanging & 1/2 Shelving as per drg.

Removing of loose shelves & refixing with suitable iron cleats 25mm width for each shelves all as shown in drg.

Removing unserviceable existing door shutter of Almirah Large Steel 1/2 Hanging & 1/2 Shelving with shelves steel made out of PBI sheet 1mm thick as shown in drg.

4.00 Almirah Small Steel 1/2 Hanging & 1/2 Shelving : Drg No. FD-1034 Removing old unserviceable 6 Lever Lock and S&F new 6 Lever Lock with Duplicate Key as shown in drg.

Removing old unserviceable handle and S&F new handle 150mm long as shown in drg.

Removing old unserviceable hinges and S&F new hinges as shown in drg.

Removing old unserviceable Leg and S&F new Leg of Almirah Small Steel as shown in drg.

Removing of unserviceable shelves of Almirah Med Steel and S&F new shelves of Almirah Small Steel all as shown in drg.

Removing old unserviceable Locking assembly with iron plate, 02 rods 10mm dia & lock cover and S&F new locking assembly set complete of Almirah Small Steel as per drg.

Refixing loose shelves with spot welding of broken joints not exceeding 25mm in length.

Removing unserviceable existing door shutter of almirah small steel made out of 1 mm thick PBI sheet complete all as per drg.

5.00 Chairs Writing MAP : Drg No. FD/E6/MAP/12 Removing of existing unserviceable seat ply including cushion foam and tapestry of chair writing MAP and S&F with new seat ply including cushion form and tapestry as shown in drg.

Removing of existing unserviceable back ply including cushion foam and tapestry of chair writing MAP and S&F with new back as shown in drg.

Removing of existing unserviceable tapestry of seat of chair writing MAP and S&F with new tapestry as shown in drg.

Removing of existing unserviceable tapestry of back of chair writing MAP and S&F with new tapestry as shown in drg.

Removing of existing unserviceable handle of chair writing MAP and S&F with new handle as shown in drg.

Rejoining the base of stiffener with spot welding of broken joints not exceeding 25mm in length as and where required as per drg.

Removing unserviceable PVC beading from seat and back of existing chair writing and S&F new PVC beading in seat and back of chair writing as per drg.

Removing unserviceable PVC shoe and S&F new PVC shoe as per drg.

M&L for applying one coat of synthetic enameled paint black colour or any other tint as approved by GE including preparation of all steel surfaces complete all as specified and shown on drg.

6.00 Chair Verandah: Drg No.FD-256, FD-359 Removing of unserviceable canning of seat of chair verandah and recanning of seat of chair verandah with new cane as per drg.

Removing of unserviceable canning of back of chair verandah and recanning of back of chair verandah with new cane as per drg.

Removing of unserviceable Rubber shoe Chair verandah and S&F new Rubber shoes as per existing size on drg and directed.

7.00 Chair CB Steel With Arms Drg No. FD-75(M) Removing old unserviceable Seat of Chair CB Steel with Arms and S&F new seat frame including cane work as per drg.

Removing old unserviceable Back of Chair CB Steel with Arms and S&F new back frame including cane work as per drg.

Removing of damaged MS flat cleat 25x3 mm for Chair CB Steel with Arms and S&F new MS flat cleat 25x3mm duly welded and painted with black paint as per drg.

Removing old unserviceable old Arm rest of Chair CB Steel and S&F new arm rest as per drg.

Removing old unserviceable Cap and S&F new cap as per drg.

Removing old unserviceable shoes and S&F new shoes as per drg.

8.00 Desk : Drg No. FD-107(M), FD-1021 Removing unserviceable 1mm thick plastic laminated from top of desk and S&F new plastic laminated sheet 1mm thick, teak finish of size 1220x530 mm on the top of the desk with glue including preparing the surface by scrapping and filling holes/ depressions properly complete all as specified.

Removing unserviceable 1mm thick plastic laminated sheet from front side of desk and S&F plastic laminated sheet 1mm thick, teak finish of size 1220x200 mm on the front side of the desk with glue including preparing the surface by scrapping and filling holes/ depressions properly complete all as specified.

Removing unserviceable 1mm thick plastic laminated sheet from side of desk and S&F plastic laminated sheet 1mm thick, teak finish of size 535x200 mm on the side of the desk with glue including preparing the surface by scrapping and filling holes/ depressions properly complete all as specified

Removing worn out complete wooden box frame from existing desk and S&F new complete wooden box frame as per drg.

M&L for preparation of surface of steel tubular frame and applying one coat of synthetic enameled paint silver grey colour of the desk complete all as specified and shown on drg.

Removing worn out plywood and S&F 12 mm thick BWR plywood, exterior grade of size 1220x200 mm on the front side of the desk complete all as specified.

9.00 Desk cum bench for two persons: Drg No. GE (I) N SK 29 of 2000 Removing existing back rest of desk and S&F new back rest of 18mm thick prelaminated particle board, one side decorative laminated finish and other side plain, exterior grade of size 1200x300 mm with 4 mm thick Teak wood beading duly French polished complete all as specified.

Removing existing seat of desk and S&F new seat of desk of 18 mm thick prelaminated particle board, one side decorative laminated finish and other side plain, exterior grade of size 1200x350 mm with 4 mm thick Teak wood beading duly French polished complete all as specified.

Removing worn out complete wooden box frame including top from existing desk and S&F new wooden box frame including top made of 18mm thick prelaminated particle board one side decorative laminated finish and other side plain exterior grade with teak wood beading of 4mm thick duly French polished complete all as specified and shown on drg.

Removing existing desk top of desk and S&F new top of desk of 18 mm thick prelaminated particle board, one side decorative laminated finish and other side plain, exterior grade of size 1200x400 mm with 4 mm thick Teak wood beading duly French polished complete all as specified.

Removing unserviceable MS square pipe 300mm long from side rail of back frame of desk and S&F new MS Square pipe 300mm long as per drg.

Removing unserviceable MS square pipe 1200mm long from side rail of back frame of desk and S&F new MS Square pipe 1200mm long as per drg.

Provision of 200 mm long MS clamps made of 3 mm thick MS flat by welding including bending complete all as specified and directed.

Rejoining the joints of MS square tube with spot welding of broken joints not exceeding 25mm in length as and where required as per drg.

M&L for applying one coat of synthetic enameled paint black colour including preparation of all steel surfaces complete all as specified and shown on drg.

Removing existing 4mm thick Teak wood beading and S&F new 4mm thick Teak wood beading duly French polished complete all wherever required as specified and shown on drg.

10.00 Table computer: Drg No. TP, FD/E6/MAP/03 Removing top of table computer and S&F 900x600 mm with 18mm thick pre-laminated particle board as per existing with pressed plastic beading all round edge of table.

Removing vertical of table computer and S&F 650x150 mm with 18mm thick pre-laminated particle board as per drg.

Removing unserviceable Key Board Tray including telescopic channel and S&F new Key Board tray with telescopic channels as per drg.

Removing unserviceable drawer including telescopic channel and S&F new drawer with telescopic channels as per drg.

Removing unserviceable pull out tray including telescopic channel and S&F new pull out tray with telescopic channels as per drg.

Removing unserviceable shelf of size 450x230mm including vertical partition support and S&F new shelf size 450x230mm including vertical partition support as per drg.

M&L for applying one coat of synthetic enameled paint black colour including preparation of all steel surfaces complete all as specified and shown on drg.

11.00 Tepoy Verandah: Drg No. FD-255 Removing of unserviceable TOP and S&F New TOP as per drg.

Removing of unserviceable Rubber Shoe and S&F New Rubber Shoe as per drg.

Taking out unserviceable MS flat iron supports and providing new flat iron support 25x3 mm to required length and shape complete all as specified in drg.

Rejoining the joints of MS tube with spot welding of broken joints not exceeding 25mm in length as and where required as per drg.

12.00 Locker Steel: Drg No. FD-1029, FD-257 Removing of unserviceable Hasp & Staple and S&F New Hasp and Staple as per drg.

Removing of unserviceable Handle and S&F New Handle as per drg.

Removing of unserviceable Leg and S&F New Leg as per drg.

Removing of unserviceable shelf and S&F new shelf as per drg.

Removing unserviceable existing door shutter of locker steel made out of 1mm thick PBI sheet complete all as specified.

Removing worn out unserviceable aluminium rod 20 mm dia and S&F new aluminium rod as per existing all as shown on drawing complete all as specified.

Refixing loose shelves with spot welding of broken joints not exceeding 25mm in length.

13.00 Chair School with Hand Board: Drg No. FD/E6/MAP/05 Removing of board top openable with PVC edging and screwed to 25mm dia hollow steel pipe and S&F new board top openable with PVC edging and screwed to 25mm dia hollow steel pipe as per Drg.

Removing of unserviceable one piece Seat and Back and S&F New one piece seat and back as per drg.

14.00 Table dining steel 900x900 mm: Drg No. FD-1009 Removing unserviceable table top and S&F new table top, 18mm thick prelaminated particle board, one side decorative lamination and other side balancing white lamination, Medium density, exterior grade with 4 mm thick Teak wood beading alround duly French polished complete all as specified.

Provision of 300 mm long MS clamps made of 3 mm thick MS flat by welding including bending complete all as specified.

Taking down unserviceable rubber shoes and S&F new rubber shoes to the legs of the table complete all as specified.

Rejoining the joints of MS square tube with spot welding of broken joints not exceeding 25mm in length as and where required as per drg.

15.00 Book Case steel: Drg No. FD - 1028, FD-1028A, FD-90(M) Removing of denting of shelves wherever required in rack steel complete all as specified.

Removing worn out shutter and S&F new shutter made out of MS Sheets as per existing and to made functional for opening by swing up the shutter which can be rolled in complete all as specified.

Replacement of unserviceable shelve of book case steel of existing size with new shelve as shown and specified in drg.

Removing of unserviceable locks and S&F new lock ISI Marked 75mm as per existing with duplicate keys complete all as specified.

Replacement of unserviceable broken glass of book case steel with new glass of existing size as shown in drg complete all as specified.

Removing of unserviceable handles S&F new 100mm long handle ISI Marked as per existing complete all as shown in drg and as specified.

16.00 Chair Computer Revolving with Arms: Drg No. FD/E6/MAP/01 Removing unserviceable star Base with castor wheels and S&F New star base including castor wheels as per drg.

Removing unserviceable castor wheel and S&F New castor wheel as per drg.

Removing unserviceable hydraulic gas pump and S&F new hydraulic gas pump as per drg.

Removing unserviceable handle and S&F new handle as per drg.

Removing old unserviceable upholstery of seat with cushion foam and S&F new good quality of upholstery of seat with cushion foam matching with existing as shown in drg.

Removing old unserviceable upholstery of Back with cushion foam and S&F new good quality of upholstery of Back with cushion foam matching with existing as shown in drg.

Removing of existing unserviceable tapestry of seat and S&F with new tapestry as shown in drg.

Removing of existing unserviceable tapestry of back and S&F with new tapestry as shown in drg.

17.00 Double Bunk Charpoy Hard Top : Drg No. FD-112 (M), FD-263 Welding of broken frame and provide nuts and bolts to fix as and where required to restructure the frame properly and applying one coat of synthetic enamel paint black to the complete frame of Double Bunk Charpoy complete as directed as per drg.

Removing existing unserviceable plywood top from the Double Bunk Charpoy and S&F new 12mm thick plywood ISI Marked BWR as per drg.

18.00 Charpoy IP with hard top: Drg No. FD/MAP-II/01 Removing of existing unserviceable long rail and S&F new long rail of 25x65mm (16 gauge) MS Tube as shown in drg.

Removing of existing unserviceable short rail and S&F new short rail of 25x65mm (16 gauge) MS Tube as shown in drg.

Removing of existing unserviceable leg and S&F new leg of 32x32mm (16 gauge) MS Tube as shown in drg.

Removing of existing unserviceable stiffener and S&F new stiffener of 25x25mm (16 gauge) MS Tube as shown in drg.

Removing of damaged MS flat cleat and S&F new MS flat cleat 25x60x6 mm duly welded and painted with black paint as per drg.

Removing of existing unserviceable rubber shoe and S&F new rubber shoe as shown in drg.

Removing existing unserviceable plywood top and S&F new 12 mm thick plywood ISI Marked BWR as per drg.

Rejoining the joints of MS tube with spot welding of broken joints not exceeding 25mm in length as and where required as per drg.

M&L for applying one coat of synthetic enameled paint black colour including preparation of all steel surfaces complete all as specified and shown on drg.

19.00 Table 900X600mm with / without Drawer: Drg No. FD-55(M)/284/224/41(M) Top with 18/19mm thick prelaminated Particle board Ext Gde of approved/ existing shade with 6mm thick teakwood beading as directed by Engineer-in-Charge.

Legs as per drg

Long rail as per drg.

Short rail as per drg.

Long Stiffener as per drg.

Short stiffener as per drg.

Drawer as per drg.

Knob as per drg.

20.00 Table Dining 6 Persons: Drg No. FD-273, 239 Top with 18/19mm thick prelaminated Particle board Ext Gde of approved/ existing shade with 6mm thick teakwood beading as directed by Engineer-in-Charge.

Triangular wooden bracket 100X100X20mm thick (1st class hardwood).

Legs as per drg.

Long Rail as per drg.

Short Rail as per drg.

21.00 Table Dining 8 Persons: Drg No. FD-273, 239 Top with 18/19mm thick prelaminated Particle board Ext Gde of approved/ existing shade with 6mm thick teakwood beading as directed by Engineer-in-Charge.

Legs as per drg.

Long Rail as per drg.

Short Rail as per drg.

Triangular wooden bracket 100X100X20mm thick.

22.00 Table Writing/ Medium/ Study: Drg No. FD-249 & FD-275 Top with 18/19mm thick prelaminated Particle board Ext Gde of approved/ existing shade with 6mm thick teakwood beading as directed by Engineer-in-Charge.

Legs as per drg.

Foot rest as per drg.

Stiffener as per drg.

Sides of cabinet with 18mm thick plywood with 1.5mm thick lamination as per drg.

Short Rail as per drg.

Front/Long Rail as per drg.

Drawer as per drg.

Ionized Aluminium Knob as per drg.

Cabinet Door with locking system.

Replacement of unserviceable veneer ply of cabinet i.e sides, back, front of cabinet with new veneer 4mm thick as shown in drg complete all as specified and as directed.

23.00 Peg Table: Drg No. FD-384/277/236 Top with 18/19mm thick prelaminated Particle board Ext Gde of approved/ existing shade with 6mm thick teakwood beading as directed by Engineer-in-Charge.

Legs as per drg.

Top batten stiffener short Rail as per drg.

Top batten stiffener long Rail as per drg.

24.00 Table Centre: Drg No. FD-274 / 235/29(M) Top with 18/19mm thick prelaminated Particle board Ext Gde of approved/ existing shade with 6mm thick teakwood beading as directed by Engineer-in-Charge.

Legs as per drg.

Top batten stiffener short Rail as per drg.

Top batten stiffener long Rail as per drg.

25.00 Teapoy: Drg No. FD-278, 232, 382, 343 Top with 18/19mm thick prelaminated Particle board Ext Gde of approved/ existing shade with 6mm thick teakwood beading as directed by Engineer-in-Charge.

Front Rail as per drg.

Legs as per drg.

Side Rail as per drg.

Stiffener as per drg.

26.00 Bed Plywood Top / Hard Bed: Drg No.FD-246/ 247 Long rail as per drg.

Short rail as per drg.

Foot Board as per drg.

Head Board as per drg.

Stiffeners as per drg.

Removing old damaged ply top & replacing with new 12mm thick BWR (IS-303) marked plywood as per drg.

Removing U/S veneer from foot board both side and S&F new veneer 4mm thick both side of foot board as per drg.

Removing U/S veneer from head board both side and S&F new veneer 4mm thick both side of head board as per drg.

Leg as per drg.

27.00 Charpoy GI hard top comprising of the following items: Drg No. FD-220 Removing of the existing unserviceable long rail and S&F new long rail with 32mm dia GI Pipe medium grade including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

Removing unserviceable broken short rail and fixing new short rail made out of old broken long rail obtained from Sl Item No. 27.01 here-in-above including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

Removing unserviceable broken Leg and fixing new leg made out of old broken long/ short rail obtained from Sl item No 27.01 & 27.02 here-in-above including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

Removing of unserviceable Elbow 3 way and supply and fix new GI Elbow 32mm dia ISI marked all as shown in drg as specified and directed.

Removing of unserviceable Checknut and S&F new checknut all as shown in drg as specified and directed.

Removing existing unserviceable plywood top from the Charpoy GI pipe and supplying & fixing new 12 mm thick plywood ISI Marked BWR type and including refixing of existing stiffener fixing with screw at equal distance to GI pipe frame of charpoy and fixing the plywood top with MS machine made screw bolts with counter sunk head at one end and other end screwed with washers and one hexagonal nut of 75 mm long, dia of neck 5 mm and applying two coats of synthetic enamel paint to stiffeners after one coat of paint primer complete as directed. Note : Plywood shall be in single piece in each charpoy.

Provision of MS angle iron 900 mm long of size 25mm x 25mm x 3mm, rest on both long rail and fixing the MS angle iron with 75mm long hexagonal nut of to fix the plywood complete all as specified and directed.

28.00 Table dressing ladies with mirror: Drg No. FD-378 & FD-251 Removing of broken rusted old looking mirror 5 mm thick and S&F of required size looking mirror as per existing.

Removing the broken shutter glass 4 mm with aluminium channel and S&F of same size as per drg.

Back of side of table with 6 mm thick plywood commercial as specified in drg.

Removing broken drawers and S&F new drawers with sides made with 12 mm thick and bottom with 6 mm thick commercial plywood as existing pattern complete all as specified and as directed.

Replacement of unserviceable knobs as per existing all as specified and as directed.

29.00 Table dressing gents with mirror: Drg No. FD-31(M) & FD-230 Removing of broken rusted old looking mirror and S&F of required size looking mirror as per FD.

Back side of table with 12 mm thick plywood commercial as specified in drg.

Removing broken drawers and S&F new drawers with sides made with 12 mm thick and bottom with 6 mm thick commercial plywood as per existing pattern complete all as specified and as directed.

30.00 Chair Dinning: Drg No. FD-228, 279 Canning as per drg.

Front Leg as per drg.

Back/Rear Leg as per drg.

Leg Stiffener as per drg.

Front/Rear/side Rail as per drg.

Back Stiffener as per drg.

S&F triangular bracket 60x60x25 mm as per drg.

Removing unserviceable canning Patti and S&F new canning Patti as per existing and as per drg.

31.00 Chair Dining Offrs long back: Drg No. FD/MAP-II/04 Front Leg as per drg.

Back/Rear Leg as per drg.

Leg Stiffener as per drg.

Back Rail as per drg.

75mm Thick, 40 density Foam with Fabric on seat of 12mm thick ply.

12mm thick BWR Phenol Bonded Plywood.

Nylon Buffers shoes.

S&F Teak Wood Stopper 75x75x25 mm as per drg.

32.00 Chair Writing: Drg No. FD-280 / 250 / 20(M) Canning as per drg.

Front Leg as per drg.

Back/Rear Leg as per drg.

Leg Stiffener as per drg.

Front/Rear/side Rail as per drg.

Back Stiffener as per drg.

Armrest as per drg.

Removing unserviceable canning Patti and S&F new canning Patti as per existing and asper drg.

S&F triangular bracket 60x60x25 mm as per drg.

33.00 Chair Easy: Drg No. FD-229/17(M) Canning including seat and back as per drg.

Front Leg as per drg.

Back/ Rear Leg as per drg.

Front/ Rear Rail of seat frame as per drg.

All types of rail of back frame as per drg.

Side Rail of seat frame as per drg.

Armrest as per drg.

Removing unserviceable canning Patti and S&F new canning Patti as per existing and as per drg.

34.00 Sofa set 5 seater with Arms: Drg No. FD-258, 281, 373 M&L replacement of un-serviceable cushion with new Foam cushion 100 mm thick 40 density as per drg.

Opening and Taking out old unserviceable Cushion cover and S&F new cushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stitched with fine thread all as specified and directed in respective drgs.

Front/Rear Leg as per Drg.

Batten of seat and back as per Drg.

Arm as per Drg.

Front/ rear/ side rail of single seater as per Drg.

Front/ rear rail of 3 seater as per Drg.

Side rail of 3 seater as per Drg.

35.00 Sofa set 4 seater with Arms: Drg No. FD-258, 281, 373 M&L replacement of un-serviceable cushion with new Foam cushion 100 mm thick 40 density as per drg.

Opening and taking out old unserviceable Cushion cover and S&F new cushion cover made out of approved tapestry cloth not less than Rs 250/-per mtr of 48" wide duly stitched with fine thread all as specified and directed in respective drgs.

Front/ Rear Leg as per Drg.

Seat ply of single seater as per Drg.

Arm as per Drg.

Front/ rear/ side rail of single seater as per Drg.

Preparing of old painted surfaces of the Almirah Large Steel. Drg No. FD-1031/ 67(M) and touching with red oxide primer where necessary, preparing surfaces and painting with one coat of synthetic enamel paint/ powder coated paint as per drg.

All same as per item No 36.00 here-in-above, but Almirah Small/ Medium Steel. Drg No.FD-1032/67(M)

All same as per item No 36.00 here-in-above, but Almirah Large Steel 1/2 Hanging & 1/2 Shelving. Drg No. FD-1033

All same as per item No 36.00 here-in-above, but Almirah Small/ Medium Steel 1/2 Hanging & 1/2 Shelving. Drg No. FD-1034

All same as per item No 36.00 here-in-above, but Locker Steel. Drg No. FD-1029, 257

All same as per item No 36.00 here-in-above, but Chair School with Hand Board. Drg No. FD/E6/MAP/05

All same as per item No 36.00 here-in-above, but Chair CB Steel With Arms. Drg No. FD-75(M)

All same as per item No 36.00 here-in-above, but Table Office Officer Steel. Drg No. FD-1003, 84(M)

All same as per item No 36.00 here-in-above, but Table Office Clerk Steel & Table Typist Steel: Drg No. FD-1004, 84(M)

All same as per item No 36.00 here-in-above, but Teapoy Verandah. Drg No. FD-255

All same as per item No 36.00 here-in-above, but Table dining steel 900 x 900mm. Drg No. FD-1009

All same as per item No 36.00 here-in-above, but Book Case steel. Drg No. FD - 1028, 1028A, 90(M)

All same as per item No 36.00 here-in-above, but Chair Verandah. Drg No.FD-256, 359

All same as per item No 36.00 here-in-above, but Stool steel. Drg No. FD-81M, FD-02

All same as per item No 36.00 here-in-above, but Book Shelf open Small Steel. Drg No. FD-69(M)

All same as per item No 36.00 here-in-above, but Rack Shoe Steel. Drg No. FD/E6/MAP/02(R)

M&L for applying wax for depressed surfaces and when the surfaces dries up then applying one or more coat of French polish until high glossy finish is obtained to Bed Plywood Top complete all as directed. Drg No. FD-246/247

All same as per item No 52.00 here-in-above, but Bin Soiled Linen. Drg No. FD-244 / 212/15(M)

All same as per item No 52.00 here-in-above, but Chair Dinning. Drg No. FD-228/ 279

All same as per item No 52.00 here-in-above, but Chair Writing. Drg No. FD-280 /250/20(M)

All same as per item No 52.00 here-in-above, but Chair Easy. Drg No. FD-229/17(M)

All same as per item No 52.000 here-in-above, but Chair Easy Cushioned. Drg No. FD-358.

All same as per item No 52.00 here-in-above, but Hat Stand with Mirror. Drg No. FD-233

All same as per item No 52.00 here-in-above, but Peg Table. Drg No. FD-384/ 277/ 236

All same as per item No 52.00 here-in-above, but Side Board. Drg No. FD-241/ 371/ 26(M)

All same as per item No 52.00 here-in-above, but Sofa Set 5 seater. Drg No. FD-281/ 258/ 373

All same as per item No 52.00 here-in-above, but Sofa Set 4 seater. Drg No. FD-281/ 258/ 373

All same as per item No 52.00 here-in-above, but Stool CB Dressing. Drg No. FD-282, 252

All same as per item No 52.00 here-in-above, but Stool dressing cushioned. Drg No. FD/E6/MAP/14

All same as per item No 52.00 here-in-above, but Table dining 6 pers. Drg No. FD-239 /273

All same as per item No 52.00 here-in-above, but Table dining 8 pers. Drg No. FD-239 /273

All same as per item No 52.00 here-in-above, but Table 900x600mm with/ without Drawer/ table 900x900. Drg No. FD-88(M)/ 224/ 231/ 291/ 284/ 283/ 41(M) / 55(M)

All same as per item No 52.00 here-in-above, but Table bed side. Drg No. FD-248/ 276

All same as per item No 52.00 here-in-above, but Table centre. Drg No. FD-235/ 274/ 29(M)

All same as per item No 52.00 here-in-above, but Table writing/ Table Medium. Drg No. FD-275, 249

All same as per item No 52.00 here-in-above, but Teapoy. Drg No. FD-278, 232, 382, 343

All same as per item No 52.00 here-in-above, but Table dressing gents. Drg No. FD-379, 31(M), 230

All same as per item No 52.00 here-in-above, but Table dressing ladies. Drg No. FD-378, FD-251

All same as per item No 52.00 here-in-above, but Chair Dining Offr long back. Drg No. FD/MAP-II/04

Replacement of unserviceable PVC Shoe for all types of wooden Chairs, Tables, Stool CB dressing, Sofa set, etc and Supply and Fix new PVC shoe as per drg. Drg Nos. FD-232/278, FD-275, FD-251, FD-230, FD-235/ 274, FD-248/ 276, FD-224/ 231/ 291/ 284/ 283, FD-282, FD-281/ 373, FD-384/ 277, FD-233, FD-229/ 201, FD-280/ 202, FD-225/ 228/ 279/ 285

Dhangot Brothers

M/S Super Steel Works

shreekalyanwoodworks