Remaining work of Installation of micro solid waste management plant at Shri Naina Devi ji for TTSNDJI Distt Bilaspur (HP) Sub Head (a) Civil Work.

Amount

Brick work using common burnt clay F.P.S. ( Non modular) building bricks of class designation 7.5 in super structure above plinth level upto floor V in all shapes and sizes in (a) cement mortar 1:6 ( 1 cement : 6 sand ) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works i) ISI make

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer:-Using M.S. angels 40x40x6 mm for diagonal braces complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. ISI make

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete (a) With 2nd class teak wood beading 62X19 mm complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. ISI make

6 mm cement plaster of mix :-1:3 (1 cement : 3 fine sand) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

15 mm cement plaster on rough side of single or half brick wall of mix (a) 1:6 ( 1 cement : 6 coarse sand) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Finishing walls with water proofing cement paint of required shade : - New work (Two or more coats applied @ 3.84 kg/10 sqm) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. i ( Asian Paint)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :- complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. Two or more coats on new work i ( Asian Paint)

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. .( a) 110 mm diameter Finolex ISI make

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (a) All kinds of soil ( Item No 2.8 Page 69 )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : -1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:- 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Centering and shuttering including strutting, propping etc. and removal of form for :- Foundations, footings, bases of columns, etc. for mass concrete complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. ISI make

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever (a) 0.63 mm thick with zinc coating not less than 275 gm/ m² complete in all respect within all leads and lifts as per the direction and best satisfaction of Engineer- in charge. (a) Tata make

ankush kumar khanna (BID ID -515655)

Sanjeev Kumar Govt Contractor (BID ID -515876)