Deposited Work

Item Quantities Item of work Tendered Rate

No. estimated but Total amount

No. estimated but Total amount

Unit according to

In Figures In Word estiamted

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of following Rupees FourtySix

size to be erected as directed. Paise FourtySix Only

e) 1.50 Sq.mm 3 core round PVC sheathed

Providing and erecting Miniature circuit breaker single pole

Rupees One Hundred

6A to 25A suitable to operate on 240 V A.C. system and having

2 15 Ea 112.11 Twelve Paise Eleven

breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for

Rupees Two Hundred

lighting Load (B Curve) having 10 KA breaking capacity &

3 2 Ea 278.76 SeventyEight Paise

confirms to IS : 8828 in existing box having following capacity

SeventySix Only

(A) 32 Amp. Cat.III

Providing & erecting 415V MCB Four Pole Switch for

Rupees Six Hundred

Lighting Load (B curve) having 10KA breaking capacity &

4 2 Ea 638.32 ThirtyEight Paise

confirms to IS :8828 in existing box having following capacity

(b)40 Amp. Cat.III

Rupees SeventySeven

Providing and erecting HOT deep Galvanised iron strip wire

5 15 Kg 77.77 Paise SeventySeven

Providing and erecting Pipe type earthing having

Rupees Three Hundred

cms.long and 2.5 cms. dia. galvanised iron pipe with coupling

6 15 Ea 368.65 SixtyEight Paise

and buch buried in specially prepared earth pit complete with

necessary 8 SWG earth wire.

Rupees One Hundred

For using salt and charcoal / coke as required for pipe type

7 15 Ea 171.70 SeventyOne Paise

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV. Rupees One Hundred

8 391 Mtr to be laid on wall with necessary clamps or in existing trench / 117.16 Seventeen Paise

pipe of following size of cables (A) 4 Sixteen Only

Making trench(removal & re erction charges of paver

block/stone including) in soft soil of suitable width of 90 cm Rupees FiftyFive Paise

deep for laying cable or locating the fault all over the run and FiftyFive Only

back filling the same and making the surface as normal ground.

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required Rupees SixtyTwo

depth in existing trench for laying of cable. below ground / Paise SixtyTwo Only

road surface for enclosing cable

(A)50 mm outer dia

Supplying & erecting Galvanized M.S pipe post “B” class

Rupees Four Thousand

mm O.D 6 mtr. Long duly painted with two coats of aluminium

Four Hundred Fourty

11 15 Ea paint complete with metallic base- plate of 300 mm x 300 mm x 4440.97

Paise NinetySeven

4mm thick for using as a compound light pole with approx.

Providing 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 45 x 45 x

100 cm. Deep in below ground level with plinth of 45 cm x 45 Rupees Eight Hundred

cm (or 45 cm dia x 45 cm) high upper ground level with Nine Paise One Only

necessary curing and finishing in approved manner.

( for 4 & 6 mtr pole)

Supplying & erecting approved make SMC press moulded

composite FRP . loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

Rupees Four Hundred

rail for mounting mob & hinged doors as per requirement

13 15 Ea 476.72 SeventySix Paise

having locking arrangements with mounting clamp with nuts,

SeventyTwo Only

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (C)150mm x

125mm x 100mm [deep]

Supplying and erecting Street light pole bracket comprising

main B Class MS pipe of 4.2 cm/require outside dia. complete

with suitable B Class M.S. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size of

Rupees Four Hundred

pole top having nuts and bolts for fixing the brackets and having

14 15 Ea 450.46 Fifty Paise FourtySix

spread of 0.5 mtr. Length with 110 deg.with vertical plane and

suitable welded stiffener reducer and nipple with check nut

complete painted with one coat.of Red oxide / PU base primer

and two coats of Aluminium / PU paint. paint with following

nos of arms. [A] Single Arm bracket 0.5 Mtr

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

15 aluminium with diffuser and Polycarbonate optics/ lenses, with 0

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80 certificates)

(A) Street Light (IP-65), Surge protection -4KV integral, Light

must have 440VAC line supply over voltage

protection.(Phillips, Wipro, Surya, Orient, Pyrotech, Bajaj,

Havells, Jaquare, Osram, Greatwhite & Ensave make )( with

Two year complete replacement warranty & Bidder has to

submit of letest testing Certificte of NABL approve

Laboratry /ERDA testing certificate for quality of fitting if

any charges for testing ceritificate will be paid by bidder)

15 Ea (i) 48 watts Cat-lll (Additional 10KV Non integral) 3345.12

Hundred FourtyFive

Paise Twelve Only

Rupees Two Lakh FourtyEight Thousand Two Hundred Sixty Paise Two Only

Note The Credit of dismentalled materials for Rs. 00.00 shall be recovered from the First R.A. bill payable to the contrator and there after

:- the dismentalled materials shall be the property of the contractor.

I/We am/are willing to carry out the work at__________________% above/below (in figures)_____________________________________percent

Above / below (in words) the estimated rates mentioned above amount of my\our tender works out as under :-

Estimated amount put to Tender Rs. _________

Deduct________% below Rs. _________

Net Amount Rs. _________

Estimated amount put to Tender Rs. _________

Net Amount Rs. _________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding

material,labour and other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender

documents of this work and agree to execute the same accordingly.

C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out work on the instruction of Competant

Authority on Tender Submitted rate,No Excuse will be Accepted.Hence Contractor are Requested to quote the rate considering this

D Contractor are requested to quote the Tender by considering that payment will be made after availibility of grant.Contractor has to

start the work immediately after issue of Work Order and as per instruction of Engineer-in-Charge irrespective of availibility of grant.

This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid to the agency as per

E existing guidelines.

(Signature of the Contractor) Deputy Executive Engineer

Electrical R&B Sub Division

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered as final.