SPECIAL REPAIR TO SNCOS MESS BLDG AT 17 FBSU UNDER GE AF TRIVANDRUM

Amount

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified & directed

M&L for RCC, 1:2:4, type B-1 (using 20mm graded aggregate) in slab supproted on walls, beam and columns in floor, roof etc complete all as specified & directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified & directed

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs etc complete all as specified & directed

Taking down the chowkat or frame and refixing in same position chowkhats of frames exc 1.5 Sqm But not exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified & directed

Taking down chowkhats or frames exc 1.5 Sqm But not exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified & directed

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each refixing in the same opening complete all as specified & directed

Taking down door shutters area exc 1 sq. m and n exc 2 sqm each complete all as specified & directed

M&L for miscellaneous repairs to Pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, joinery, etc. including painting or oiling to match, if required for 1st class hardwood complete all as specified & directed

S & F 12mm thick prelaminated particle board interrior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips and fixed in repairs complete all as specified & direced

S&F 100 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hing plate and fixed with screws complete all as specified & directed

M&L 2nd class hard wood plain, framed, panelled shutters 30mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted incl hinges, tower bolts etc complete all as specified & directed

M&L 2nd class hard wood glazed and skeleton shutters, 30mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, incl hinges, tower bolts etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified & directed

M&L Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side incl hinges , tower bolts etc as per specification and drawings complete all as specified & directed

S & F butt hinges 100mm mild steel hinges pin, bright polished and fixed, type B-21complete all as specified & directed

S & F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 150 mm long aluminium handles, cast type anodised all as specified and as directed.

S & F Floor door stopper of 150 mm length , aluminium alloy body and tongue, anodised, with hard drawn steel spring. fixed complete all as specified & directed

S & F powder coated aluminium anodised frames for doors/ windows/ ventilators with one or more rebates including anodised aluminium snap beading screws, joining cleat for fixing etc. complete all as specified.

S & F aluminium powder coated shutters for door / sliding window shutter, without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 4.8 mm thick sheet glass ordinary quality in square or rectangle not exc 0.5 sqm in each pane fixed to alluminium window frame including necessary jointing cleat, glazing clip,rubber neoprene tacking anodised snapbeading screw complete all as specified and directed.

S&F to repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples

S & F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in eac pane incl hacking out the old glass complete all as specified & directed

M & L for extra over brickwork for closing cavity between wall & roof sheet, cills and heads of opening etc. incl necessary scaffolding reqd complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M&L for Vitrified tiles 10mm thick (square / rectangular) polished, light shade , area of each tiles n exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl. 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Virified ceramic tiles 10mm thick (square / rectangular) polished,light shade as in skirting / dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl. 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Material & Labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified.

M&L for coloured glazed ceramic tiles in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 complete all as specified .

M&L 18-20 mm thick black granite stone as in platform slabs/ stairs (step or risers) of table rounded, edges mouldeing and polished in platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified.

Dismantling boarding, any description, fixed any position with nails complete all as specified and directed.

S&F 2nd class hardwood clean sawn boards on planks, eaves board 15mm thick width n exc. 20 cm fixed with nails in any situation specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

M & L framed work such as frames, grills, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars framework and similar work con- forming to Fe.290.Gde-E-165 to be fixed at any height from GL all as directed.

S&F collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Taking down cement plaster on brick or stone wall, including racking out joints, hacking for key scrubbing down with water etc.complete all as specified and directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick/concrete surfaces in CM 1:4 finished even & smooth without using extra cement.complete all as specified and directed.

M&L Rendering 10mm thick on other than fair faces of brick/concrete or stone masonary surfaces in CM 1:6 finished even & smooth without using extra cement.complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceiling concrete surfaces complete all as specified and directed.

M&L for preparation of new treated surfaces of walls and applying two coats of distemper oil emulsiont over a coat of chalk whitening .complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coat of weather proof coat paint over a coat of primer complete all as specified and directed.

M&L preparing of new plastered surface of ceiling and applying two coat of white wash on ceiling. complete all as specified and directed.

M&L for preparation of old treated surfaces of walls and applying two coats of oil bound distemper with complete removal of existing treatment , over a coat of one coat white cement wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment and preparation of old walls surfaces and apply two coats of weather proof coat paint all as specified and directed.

M&L for preparing old treated steel surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old untreated wood surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer directed by Engr-in-charge.

M & L for two coats of Synthetic Enamel paint on any surfaces of any description, n exc 10cm width or girth when connected with other painting or when painted in different tint complete all as specified & directed

Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 3-layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. outer dia of pipe 20mm as specified and directed by Engr-in-charge.

Material & Labour for PVC water storage tank 1000 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, tank nipple , high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of any description complete all as specified.

S&F vitreous china wash down water closet (EWC) , white including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified.

S&F in repair 10 litre capacity flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified.

S&F in repairs vitreous china half stall urinals,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe.

S&F Bib taps, chromium plated , cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm bore of pipe brass ferrule fixed in repair .complete all as specified & directed

S&F Pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure 15mm dia bore fixed in repair. complete all as specified & directed

S&F in repair vitreous china, white coloured, counter top wash hand basin, oval type, including cutting and pinning in, but excluding waste pipe complete all as directed

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed

S&F curtain rail ,20 mm dia anodised aluminium alloy ,chromium plated with fixing brackets,stops, rollers etc., incl taking down of old curtain rods, all as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S & F CP angle/ stop cock valve, high pressure screwed for iron pipe and fixed.complete all as specified and directed.

S&F Chromium plated shower roses in repair with or without swivel joints, any size, including fixing to steel pipe or union

M & L 50 mm thick plain cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays complete all as specified & directed

M&L for PCC 1:2:4, B-1 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.

Extra for forming fair finished to drain channel not exc 50 cm inner girth in cement concrete using extra cement complete all as specified and directed.

Dismantling ceiling boards incl cover fillets and snap grid framework complete as specified.

S&F Anodised aluminium snap grid size 600mm x600mm frame work for false ceiling all as specified and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

S & F PVC insulation panels with 10mm thick and EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium size 605mm x 605mm / G.I./M.S. as per specification and directed by Engr-in charge.

Demolition and breaking of drain pipes (Salt glazed ware, AC or reinforced concrete/cast iron) jointed in cement mortar and taking out of trenches incl dismantling of PCC bedding for 150 mm internal dia pipes complete all as specified & directed

M&L PVC (SWR) pipes 150 mm dia , single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed

Cutting into existing manholes for connecting new drains, making good to pipe 150mm thick and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors 110mm bore complete all as specified & directed

S&F PVC (SWR) bends any radius 110mm bore complete all as specified & directed

S&F PVC (SWR) couplers 110mm bore complete all as specified & directed

S&F PVC (SWR) reducers 110mm bore complete all as specified & directed

Dismantling plain or corrugated steel sheeting any gauge, thickness roof coverings complete all as specified & directed

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering , fixed with self tapping screws as specified.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof ridges/ cladding etc , fixed with self tapping screws as specified.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking creditand making good the disturbed plaster surfaces of wall, floor, ceiling and painting 2 coat of white wash/distamber to meet the existing surface and removing materials and debris to reinstate the premise neat and clean complete all as specified and directed.

M&L for point wiring with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multistranded copper conductor drawn in and including PVC conduit and all conduit accessories concealed and including provision of 1.5 sqmm PVC insulated copper cable FRLSH ISI marked as earth continuity conductor fabricated branded Modular metal flush box concealed in walls with Modular suitable pate with cover with suitable screws for housing switches socket outlets fan regulators etc. all as specified and as directed for the following: -

One light point controlled by one switch

All as per item No 86.01 here in before but for one bell point controlled by one bell push.

All as per item No 86.01 here in before but for one ceiling fan/exhaust fan/wall mounting fan point controlled by one switch/ceiling fan regulator.

All as per item No. 86.01 here in before but for one 3 pin socket out 5 amp on the same board

All as per item No. 86.01 here in before but for one switch socket outlet 3 pin 5 Amps on independent board

All as per Sl No 86 above but Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently

All as per Sl No 86 above but wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently.

M&L for sub main wiring with PVC insulated unsheathed FRLS 1100 volts grade multi stranded copper conductor cable 3 runs of 6 sqmm drawn through in and incl suitable size PVC rigid conduit and all accessories fixed concealed to wall/floors along with one run of 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size. Note: (a) 3 runs of 6 sqmm cable along with one run of 6 sqmm cable for earth conductor PVC conduit shall be measured as one length Make:- Havells/ Polycab/ Plaza.

M&L for Switch modular type one way 6 Amps , one module Make Legrand(Mylink)/equel to Anchor/SSK

M&L for Modular bell push 6A 1 module Make Legrand(Mylink)/equel to Anchor/SSK

M&L for Modular socket 2/3 pin multi purpose flush type 2 modular 6 Amps. Make Legrand(Mylink)/equal to Anchor/SSK

M&L for Switch modular type one way 16 Amps , one module Make Legrand(Mylink)/equel to Anchor/SSK

M&L for Modular socket flush type multi purpos 5A/16A-6 pin combined 2 module Make Legrand(Mylink)/equel to Anchor/SSK

Supply & fix modular type fan step regulator 360 Degree rotatable type 120W - 2 Module. Make : Legrand Mylink / Philips Sleek / Schneider Electric Opate or its equivalent

M&L for Ceiling rose 65x50mm surface PVC / Polycarbonate, isolated body with three terminals.Make Legrand/Anchor/SSK

M&L for bell AC 230 volts single pole Make Legrand/Anchor/SSK

Supply and fixing ceiling fans complete with blades,down rods,electronic regulator and accessories,230V,1200mm sweep. Min air delivery 210 CFM with service value 6.00BEE. Five star rated with brushless direct current motor (BLDC) Make : Orient/Usha/Bajaj

Supply and fix Wall mounting fan 400mm sweep with three modes of operation,corrossion resistant powder coated guards,plastic blade with silent operation,thermal overload protection for motor, Ocillating type all as specified. Make : Orient/Usha/Bajaj

S&F in repair LED lights fitting 1x 20W, 220V,AC box type extruded aluminium housing, high quality PC diffuser with inbuilt driver, including LED tube light of efficacy 125 Lumens/watt connecting up with flexible copper conductor cable of suitable size from ceiling rose complete. Make : Cropton BRIGHT LINEA Cat part No CCS-100-20-65-HL2-DP-NWH or equivalent make of Wipro/Havells

S&F in repair LED light fitting with high performance batten comprises of extruded channel in thermally conductive material, high translucent serrated milky white diffuser 2 feet, 10 watt 220 V AC with in built driver holder and LED lamp of efficacy 100 lumens/watt including connecting up with flexible copper conductor cable of suitable size complete. Make : Crompton TRIMLINE NEU Cat part No -CCS-103-10-30-SL-DP-NWH or equel make of Wipro/Havells

S&F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency full lit luminaire with glare free uniform illumination with longer life and less maintenance complete with driver, holders & LED lamp suitable for roof ceiling of efficacy 100 Lumens/watt including connecting up with three core flexible copper conductor cases of suitable size complete. Make : Crompton POLARIS NIO-I Cat part No LCTLRNE-36-FO-CDL or equivalent make of Wipro/Havells

S&F in repair MCB DB with sheet metal enclosure double door type concealed on wall single pole and neutral 8 way 240V with 200A rated bus bar all as specified and directed. Make : Legrand/Havells/Indo Asian

S&F in repair MCB DB with sheet metal enclosure double door type concealed on wall Triple pole and neutral 4 way 415V with 200A rated bus bar all as specified and directed. Make : Legrand/Havells/Indo Asian

S&F in repair Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket ,240V complete with one single pole MCB of 25 A all as specified and directed. Make : Legrand/Havells/Indo Asian

Supply and fixing 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole and Neutral in the MCB DB complete with connection testing and commissioning. Make : Legrand/Havells/Indo Asian

Supply and fixing 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning. Make : Legrand/Havells/Indo Asian

Supply and fixing 40 to 100 Amp rating 415V, 10KA 'C' curve miniature circuit breaker (MCB) of Trible pole and Neutral in the MCB DB complete with connection testing and commissioning. Make : Legrand/Havells/Indo Asian

Labour only for removing of ceiling fan from ceiling by disconnecting all electric conection and spray painting in situ with one coat of synthetic enamel white paint,filling cavities with filler after cleaning all dust/foreign materials and hanging only after competion of E/M and B&R works and connecting up including provision of three core copper cable of suitable size from ceiling rose or connector to fan and testing as directed by engr-in-charge.

M&L for Spary Painting of exhaust fan in situ with one coat of synthetic enamel paint,filling cavities with filler after cleaning all dusts/foreign materials all as directed and specified.

Supply and fix electronic meters tamper proof LCD Display with Polycarbonate cover 415volt, 10-60Amp,accuracy class 1-50Hz,conforming to IS 13779,IP-54 with parameters to show data ,time,current reading,load ,PF,Voltage and KWH all as specified.

Fixing only LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light obtained from Item No 85 here in before including connecting up by providing with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Fixing only LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

M&L for Sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 10 sqmm drawn through existing concealed 20mm/25mm/32mm dia rigid PVC conduit of medium grade with 10 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including connection with existing MDB/SMDB and taking down existing sub main wiring of any size. Note: (a) 2 runs of 10 sqmm cable along with one run of 10 sqmm cable for earth conductor PVC casing capping shall be measured as one length. Make:- Havells/ Polycab/ Plaza.

M&L for point wiring with 4 sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor drawn in and including rigid PVC rigid conduit of 20mm size medium grade with all conduit accessories including provision of 4 sqmm PVC insulated copper cable FRLS ISI marked as earth continuity conductor fabricated branded Modular metal flush box concealed in walls with Modular suitable pate with cover with suitable screws for AC point all as specified and as directed.

M&L for sheet metal enclosure with socket plug top and MCBs of single pole and neutral enclosure flush to wall with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp, 240Volt all as specified and directed.

Supply and fixing Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) Single pole and Neutral of current carrying capacity 40 to 63A in the MCB DB complete with connection testing and commissioning.

Supply and fixing Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) Single pole of current carrying capacity 40 to 63A in the MCB DB complete with connection testing and commissioning.

Supply and fixing Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) Single pole of current carrying capacity 5 to 32A in the MCB DB complete with connection testing and commissioning.

DEFT GROUP ELECTROMECHANICAL