Construction Work Of GVP Points Development in As Per Various Location Chart, Dhrol. Under Nirmal Gujarat 2.0 (Second Call)

NAME OF WORK: CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT AS PER VARIOUS

LOCATION CHART. AT, DHROL

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

7 Schedule - "B"- 7

8 Schedule - "B"- 8

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should

be writen in figures and words) of the Estimated rates mentioned above amount of my / our Tender works

Estimated Amount Estimated Amount

Put to Tender Rs. 5,48,527=00 Put to Tender Rs. 5,48,527=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST. : JAMNAGAR

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT

LOCATION : VANAND STREET, At. DHROL

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

PROVIDING, FIXING, AND FITTING C.C.T.V CAMERA

Supply, Installation, Testing and Comissioning of 4G Solar 3MP PTZ Outdoor

Dual Lens Camera 128 GB SD card, 1 year warranty

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering site requirement.

and C.C.Foundation (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST. : JAMNAGAR

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT

LOCATION : COURT STREET, At. DHROL

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

PROVIDING, FIXING, AND FITTING C.C.T.V CAMERA

Supply, Installation, Testing and Comissioning of 4G Solar 3MP PTZ Outdoor Dual Lens

Camera 128 GB SD card, 1 year warranty 1.00 15150.00 No

Supplying and erecting approved make Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable termination to be erected

With Suitable foundation (Included) as per details given by manufacturer considering

site requirement. and C.C.Foundation (C) 5 Mtr. Long 70 mm Top X 130 mm bottom

dia, 3 mm thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

PAINTING WORK ON EXISTING WALL

drawing picture on existing wall including finishing surface and all paint, colour and

required material and as per guide nagarpalika engineer (Related swachchha bharat

mission, climate exchage and other save water etc) 12.50 848.40 Sqmt

PROVIDING, FIXING, AND FITTING BENCHES

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench, Capacity

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe 14 Gauge Back

Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters

Bench Type Integrated Seat and Back, Seating Capacity 3 Seater, Stand/Legs Design

Decorative, Finsh Powder Coating, Back Rest With Arm Rest With Colour of Seat and

Back As per buyer's Choice

Total Height 915 millimeter

Seat Height 400 millimeter

Width 450 millimeter

Total Area Required 1500 millimeter

Warranty 1 year

Weight Bearing Capacity 150 kilogram

Test reports to be furnished to buyer on demand NA

Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 6.00 8080.00 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST. : JAMNAGAR

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT

LOCATION : JODIYA NAKU,NEAR RADHIKA PAAN, At. DHROL

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

PROVIDING, FIXING, AND FITTING C.C.T.V CAMERA

Supply, Installation, Testing and Comissioning of 4G Solar 3MP PTZ Outdoor

Dual Lens Camera 128 GB SD card, 1 year warranty 1.00 15150.00 No

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering site requirement.

and C.C.Foundation (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

PROVIDING, FIXING, AND FITTING BENCHES

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe 14 Gauge

Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters

Bench Type Integrated Seat and Back, Seating Capacity 3 Seater, Stand/Legs

Design Decorative, Finsh Powder Coating, Back Rest With Arm Rest With

Colour of Seat and Back As per buyer's Choice

Total Height 915 millimeter

Seat Height 400 millimeter

Width 450 millimeter

Total Area Required 1500 millimeter

Warranty 1 year

Weight Bearing Capacity 150 kilogram

Test reports to be furnished to buyer on demand NA

Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 6.00 8080.00 No

PROVIDING, FIXING, AND FITTING OF SIGN BOARD

Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x

90cms. rectangle as per the design of IRC-67-1977 pre treated with phospheting

process & acid teching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint; reflectorised with retro refiective sheeting as per latest

M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with

best quality epoxy coatings in black and white bends. the details of symbol for

each board shall be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including

excavation curing tec. complete under the supervision of engineer in charge. (A)

Engineer Grade (VR)

PROVIDING, FIXING OF TWIN WASTE BIN

Providing & Fixing Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

3 Pole capacity 50 ltr

Material of Pole with stand and container (Bin) Stainless Steel Grade

Pole dia (in mm) - Must declare

Pole height (in mm) - Must declare

Pole pipe thickness (in mm) - Must declare

Generic Capacity of each bin (Liters) 80 Number of Bins

Material Plastic Material Grade HDPE Pole Mounted Yes Material of Pole Mild

Steel Rain Protection Roof provided with Pole No Colour Green Structure

Standing Plugged Outlet for Washing and Draining No

Shape and Size Shape of Bin Cuboidal Top Width (mm)

Bottom Width (mm) 200 Bin Height (mm) 100 Lid Width (mm) 200 Marking

Types of Waste mark indicated on Bin Yes Including of Required Excavation,

C.C. Foundation

Description of store Stainless Steel Pole Mounted SS Dust Bin

Type of Bin 2 Bin Mounted with 3 Pole

Shape of bin Round

Capacity of each Bin (container) (in Ltrs)

REPORTS AND CERTIFICATION

Availability of the Type Test Report from Central Govt. /NABL/ILAC Accredited

lab covering all technical requirements. No

Type Test Certificate No - Must declare NA

Type Test Certificate date - Must declare NA

and finishing & fixing as per instruction etc. complete. 1.00 8383.00 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST. : JAMNAGAR

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT

LOCATION : NEAR MANOKAMNA TEMPLE, At. DHROL

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

CONSTRUCTION WORK OF PAVING BLOCK FLOORING

Box cutting the road surface to proper slope and camber for making a base for road

work including ramming the excavated stuff and despositing on the road side slope as

directed up to all lead. 7.40 111.85 Cumt.

Providing and filling in foundation with ordinary Cement concrete M-100 mix and

providing necessary vertical pin headers including formwork, vibrating, ramming and

curing complete. 4.90 3362.25 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete block 60mm

thick with grade of concrete M-300 punmatic compressed by mechanically pressed and

as per approved design confirming to IS 15658:2006 including 35mm sand layer for

levelling and filling the joints with sand in proper line and level asper guidlines of IRC :

63-2018 etc Complete. 49.00 707.55 Sqmt

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line and level,filling the joint with C:M

1:3 (1cement:3fine sand) etc complete. 35.00 410.41 Rmt.

PROVIDING, FIXING, AND FITTING BENCHES

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench, Capacity

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe 14 Gauge Back

Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters

Bench Type Integrated Seat and Back, Seating Capacity 3 Seater, Stand/Legs Design

Decorative, Finsh Powder Coating, Back Rest With Arm Rest With Colour of Seat and

Back As per buyer's Choice

Total Height 915 millimeter

Seat Height 400 millimeter

Width 450 millimeter

Total Area Required 1500 millimeter

Warranty 1 year

Weight Bearing Capacity 150 kilogram

Test reports to be furnished to buyer on demand NA

Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST. : JAMNAGAR

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT

LOCATION : VIJANAND STREET NEAR SHILPAN VILLA, At. DHROL

SCHEDULE - "B-5"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

CONSTRUCTION WORK OF PAVING BLOCK FLOORING

Box cutting the road surface to proper slope and camber for making a base for road

work including ramming the excavated stuff and despositing on the road side slope as

directed up to all lead. 6.60 111.85 Cumt.

Providing and filling in foundation with ordinary Cement concrete M-100 mix and

providing necessary vertical pin headers including formwork, vibrating, ramming and

curing complete. 4.40 3362.25 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete block 60mm

thick with grade of concrete M-300 punmatic compressed by mechanically pressed and

as per approved design confirming to IS 15658:2006 including 35mm sand layer for

levelling and filling the joints with sand in proper line and level asper guidlines of IRC :

63-2018 etc Complete. 43.80 707.55 Sqmt

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of M200 grade concret as per approved

design and including excavation for fixing in proper line and level,filling the joint with C:M

1:3 (1cement:3fine sand) etc complete. 32.00 410.41 Rmt.

PROVIDING, FIXING, AND FITTING BENCHES

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench, Capacity

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe 14 Gauge Back

Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters

Bench Type Integrated Seat and Back, Seating Capacity 3 Seater, Stand/Legs Design

Decorative, Finsh Powder Coating, Back Rest With Arm Rest With Colour of Seat and

Back As per buyer's Choice

Total Height 915 millimeter

Seat Height 400 millimeter

Width 450 millimeter

Total Area Required 1500 millimeter

Warranty 1 year

Weight Bearing Capacity 150 kilogram

Test reports to be furnished to buyer on demand NA

Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST. : JAMNAGAR

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT

LOCATION : NEAR DEVKRUPA GENERAL STORE, At. DHROL

SCHEDULE - "B-6"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

PROVIDING, FIXING, AND FITTING C.C.T.V CAMERA

Supply, Installation, Testing and Comissioning of 4G Solar 3MP PTZ Outdoor

Dual Lens Camera 128 GB SD card, 1 year warranty 1.00 15150.00 No

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering site requirement.

and C.C.Foundation (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

PROVIDING, FIXING OF TWIN WASTE BIN

Providing & Fixing Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

3 Pole capacity 50 ltr

Material of Pole with stand and container (Bin) Stainless Steel Grade

Pole dia (in mm) - Must declare

Pole height (in mm) - Must declare

Pole pipe thickness (in mm) - Must declare

Generic Capacity of each bin (Liters) 80 Number of Bins

Material Plastic Material Grade HDPE Pole Mounted Yes Material of Pole Mild

Steel Rain Protection Roof provided with Pole No Colour Green Structure

Standing Plugged Outlet for Washing and Draining No

Shape and Size Shape of Bin Cuboidal Top Width (mm)

Bottom Width (mm) 200 Bin Height (mm) 100 Lid Width (mm) 200 Marking

Types of Waste mark indicated on Bin Yes Including of Required Excavation,

C.C. Foundation

Description of store Stainless Steel Pole Mounted SS Dust Bin

Type of Bin 2 Bin Mounted with 3 Pole

Shape of bin Round

Capacity of each Bin (container) (in Ltrs)

REPORTS AND CERTIFICATION

Availability of the Type Test Report from Central Govt. /NABL/ILAC Accredited

lab covering all technical requirements. No

Type Test Certificate No - Must declare NA

Type Test Certificate date - Must declare NA

and finishing & fixing as per instruction etc. complete. 1.00 8383.00 No

PROVIDING, FIXING, AND FITTING BENCHES

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe 14 Gauge

Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters

Bench Type Integrated Seat and Back, Seating Capacity 3 Seater, Stand/Legs

Design Decorative, Finsh Powder Coating, Back Rest With Arm Rest With

Colour of Seat and Back As per buyer's Choice

Total Height 915 millimeter

Seat Height 400 millimeter

Width 450 millimeter

Total Area Required 1500 millimeter

Warranty 1 year

Weight Bearing Capacity 150 kilogram

Test reports to be furnished to buyer on demand NA

Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 4.00 8080.00 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST. : JAMNAGAR

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT

LOCATION : NEAR ARVINDBHAI MOHANBHAI, At. DHROL

SCHEDULE - "B-7"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

PROVIDING, FIXING, AND FITTING C.C.T.V CAMERA

Supply, Installation, Testing and Comissioning of 4G Solar 3MP PTZ Outdoor

Dual Lens Camera 128 GB SD card, 1 year warranty 1.00 15150.00 No

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering site requirement.

and C.C.Foundation (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

PROVIDING, FIXING OF TWIN WASTE BIN

Providing & Fixing Unbranded Stainless Steel Dust Bin 2 Bin Mounted with

3 Pole capacity 50 ltr

Material of Pole with stand and container (Bin) Stainless Steel Grade

Pole dia (in mm) - Must declare

Pole height (in mm) - Must declare

Pole pipe thickness (in mm) - Must declare

Generic Capacity of each bin (Liters) 80 Number of Bins

Material Plastic Material Grade HDPE Pole Mounted Yes Material of Pole Mild

Steel Rain Protection Roof provided with Pole No Colour Green Structure

Standing Plugged Outlet for Washing and Draining No

Shape and Size Shape of Bin Cuboidal Top Width (mm)

Bottom Width (mm) 200 Bin Height (mm) 100 Lid Width (mm) 200 Marking

Types of Waste mark indicated on Bin Yes Including of Required Excavation,

C.C. Foundation

Description of store Stainless Steel Pole Mounted SS Dust Bin

Type of Bin 2 Bin Mounted with 3 Pole

Shape of bin Round

Capacity of each Bin (container) (in Ltrs)

REPORTS AND CERTIFICATION

Availability of the Type Test Report from Central Govt. /NABL/ILAC Accredited

lab covering all technical requirements. No

Type Test Certificate No - Must declare NA

Type Test Certificate date - Must declare NA

and finishing & fixing as per instruction etc. complete. 1.00 8383.00 No

PROVIDING, FIXING, AND FITTING BENCHES

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe 14 Gauge

Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters

Bench Type Integrated Seat and Back, Seating Capacity 3 Seater, Stand/Legs

Design Decorative, Finsh Powder Coating, Back Rest With Arm Rest With

Colour of Seat and Back As per buyer's Choice

Total Height 915 millimeter

Seat Height 400 millimeter

Width 450 millimeter

Total Area Required 1500 millimeter

Warranty 1 year

Weight Bearing Capacity 150 kilogram

Test reports to be furnished to buyer on demand NA

Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 4.00 8080.00 No

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika

DHROL NAGARPALIKA - DHROL

DIST. : JAMNAGAR

SCHEME :- NIRMAL GUJARAT

NAME OF WORK :- CONSTRUCTION WORK OF GVP POINTS DEVELOPMENT

LOCATION : GAYATRINAGAR, NEAR MELADI MA MANDIR, At. DHROL

SCHEDULE - "B-8"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

CONSTRUCTION WORK OF PAVING BLOCK FLOORING

Box cutting the road surface to proper slope and camber for making a base for

road work including ramming the excavated stuff and despositing on the road

side slope as directed up to all lead. 4.40 111.85 Cumt.

Providing and filling in foundation with ordinary Cement concrete M-100 mix and

providing necessary vertical pin headers including formwork, vibrating, ramming

and curing complete. 2.90 3362.25 Cumt.

Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete block

60mm thick with grade of concrete M-300 punmatic compressed by

mechanically pressed and as per approved design confirming to IS 15658:2006

including 35mm sand layer for levelling and filling the joints with sand in proper

line and level asper guidlines of IRC : 63-2018 etc Complete.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade concret

as per approved design and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

PROVIDING, FIXING, AND FITTING BENCHES

Providing & Fixing KRISHTHA Cast Iron Powder Coating Garden Bench,

Capacity 3 Seater

Material Side Frame Material Cast Iron Seat Material Mild Steel Pipe 14 Gauge

Back Rest Material Mild Steel Pipe 14 Gauge

Technical Parameters

Bench Type Integrated Seat and Back, Seating Capacity 3 Seater, Stand/Legs

Design Decorative, Finsh Powder Coating, Back Rest With Arm Rest With

Colour of Seat and Back As per buyer's Choice

Total Height 915 millimeter

Seat Height 400 millimeter

Width 450 millimeter

Total Area Required 1500 millimeter

Warranty 1 year

Weight Bearing Capacity 150 kilogram

Test reports to be furnished to buyer on demand NA

Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove

conformity to specification No

and finishing & fixing as per instruction etc. complete. 2.00 8080.00 No

PROVIDING, FIXING, AND FITTING C.C.T.V CAMERA

Supply, Installation, Testing and Comissioning of 4G Solar 3MP PTZ Outdoor

Dual Lens Camera 128 GB SD card, 1 year warranty 1.00 15150.00 No

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected With Suitable foundation

(Included) as per details given by manufacturer considering site requirement.

and C.C.Foundation (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts .Approx Pole weight 46 kg

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl.Engineer City Manager-SWM

"DESIGN POINT" Dhrol Nagarpalika

Chief Officer President

Dhrol Nagarpalika Dhrol Nagarpalika