SPECIAL REPAIRS TO BLDG NO. T-8A (PATIENT CUM UNIT PERSONNEL COOK HOUSE AND DINING HALL) AT MILITARY HOSPITAL VADODARA UNDER GE (A) BARODA.

Amount

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing from site all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors and aprons etc. laid, bedded and pointed in any mortar and removing from site all as specified and directed.

M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular) in floors etc. area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 (Tile pattern and decoration shall be as directed by Engineer-in-charge).

M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, double charged, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor fiishes with CM 1:4 complete.

M&L for glazed ceramic tiles, coloured, 450x300x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on stone masonry surface/brick work or concrete surface. (Tile pattern and decoration shall be as directed by Engineer in-Charge.)

M & L for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade

M&L for Granite (of any type) work,slab 20-25 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete all as specified

M&L for machine cut kota stone slab 20-25 mm thick in flooring over and including 15 mm thick cement screed bed or bedding layer in CM 1:4 mixed with high performance adhesive as per manufacturers instructions, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for brick work with sub class 'B’ bricks using old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM 1:6.

M&L for rendering 10 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement.

M&L for rendering 15 mm thick in two layers, 5 mm thick in CM 1:4 mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement, over and including 10 mm thick rendering in CM 1:6 on brick work or concrete surfaces. Note:- Liquid water proofing compound shall be measured and paid for separately as “Supply only”

Supply only liquid water proofing compound.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over and including a coat of 3 mm thick wall care putty and a coat of primer all as directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling/false ceiling and applying two coats of distemper oil emulsion, white or tinted, over and including a coat of 3 mm thick wall care putty and a coat of primer all as directed.

M& L for applying Two coats of damp proof waterproofing coating @ 2.7–3.2 m2/L/coat over new plastered surface of exterior wall complete all as per manufacturer instuctions. (Make: Nerolac, Berger or equivalent) (Note: Damp proof coat applied to wall surface before exterior emulsion paint)

M & L for preparation of newly plastered surfaces of walls/ceilings of roof projection and chajjas etc. and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each . Note - Quoted rate shall be deemed to be include for cutting holes/demolition of PCC block/brick work etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each. Note - Quoted rate shall be deemed to be include for cutting holes/demolition of PCC block/brick work etc for taking down chowkats and making good the damaged surfaces in CM 1:3 all as directed.

M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE.

S & F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut ,mitered and moulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F aluminium powder coated of any colour (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden beads supplied with shutters.

S&F mild steel of grade Fe-290 (Grade E-165) in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, clamps, hold fasts and similar small articles.

M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts, filling back of chowkats etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed.

S&F 200 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized.

S&F hasp and staple of size 75 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S&F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor.

S&F in repairs mild steel helical door spring 200mm ordinary rat tail rod pattern springs including roller plate, bolting, welding etc. complete.

S&F 100 mm Pull door handles, chrome finish, Stainless steel of SS 304 grade all as per specified and directed by Engr-in-charge. Note: sample as approved by EIC/GE.

S&F magnet door stopper of rectangular size for PVC cabinets including all fittings fixed complete all as specified and directed.

S&F in repairs 22 to 25 mm dia stainless steel curtain rod, fancy type/decorative type, fixed to walls complete all as directed.

S&F in repairs, stainless steel decorative finials (round type with mirror optic finish trade/standard pattern suitable for 22 to 25 mm dia decorative/fancy type curtain rods.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.

S&F rolled mild steel of grade Fe-410w (Grade E-250,quality A) in rolled section as in roof truss, frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, AZ150 as in roof covering/cladding ridge or hips, valley gutter to wall, fixed with self tapping screws as specified.

S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders; ramed balusters; walk ways; railings; framework of water tanks and similar works.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Taking up or down steel tubing 15 mm bore and connections .

S & F 20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

Taking up or down steel tubing 20 mm bore and connections.

Supply and laying 20 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections.

Supply and laying 25 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S & F 32 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S & F in repairs 110mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs 110 mm bore UPVC (SWR) bend, suitable for type ‘B’ pipes, any radius.

S&F in repairs 110 mm bore UPVC (SWR) bend, suitable for type ‘B’ pipes, any radius with oval access door.

S&F 75 mm bore UPVC (SWR) pipes type ‘B’, single socketed, in any length, with rubber ring joints, laid in trenches or in floors.

S&F in repairs 75 mm bore UPVC (SWR) bend, suitable for type ‘B’ pipes, any radius.

S&F in repairs 75 mm bore UPVC (SWR) bend, suitable for type ‘B’ pipes, any radius with oval access door.

M&L in repairs for UPVC (SWR) floor trap, suitable for type ‘B’ pipes, 75 mm dia of outlet, plain with grating including jointing with solvent cement.

S&F in repairs 15 mm bore bib taps (long body), cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule as per Cat part No. CON-107KN of Make-Jaquar or techno commercially equivalent of any make specified.

S&F in repairs 15 mm bore stop valve/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

S&F in repairs 25 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

Dismantling water tanks of any description, exc. 500 & n. exc. 1000 litres capacity and removing from site.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes.

S&F in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed. Make : Prayag & equivalent.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever bracket, necessary chromium plated watse coupling, waste pipe and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified.

M&L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia, roof bands etc and making good with RCC (1:1½:3) type A0 (nominal mix) (using 12.5 mm graded stone aggregate) in RCC roof projection,chajja, fins,facia, roof bands etc and finished surface even and smooth with out using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete as directed by the Engr-in-Charge. (Reiforcement will be measured and paid saperately under respective item)

M&L in repairs precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

M&L for RCC 1:2:4 type B-1 (Nominal mix) using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like and chajjah including necessary form work all as directed

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding/roof kerb/sunken floor etc.) . and removing from site all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing cone surface even and smooth without using extra cement. (Note: Plinth protection shall be laid in bays with suitable filling material in between).

M&L of Anti termiteTreatment of surface under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

Dismantling wall and ceiling boards or insulation board any thickness including cover fillets.

S&F non asbestos acoustic false ceiling 12mm thick with aluminum anodized snap grids of 60x60cm in ceiling with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger including three coats of white wash in ceiling boards or match the shed of existing surface to a true surface complete. Make: Armstrong or equivalent

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.

S&F in repairs CP soap dish fixed to wall with brass chromium plated screws complete all as specified and directed. Make : Prayag & equivalent

M&L for sand filling, spread, levelled as in cushioning to interlocking blocks, complete all as specified and directed

M&L 75mm thick plain cement concrete (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base complete, all as specified & directed.

M&L Machine pressed, precast plain cement concrete Interlocking paver block, factoty made( with grey cement and pigment) conforming to IS-15658-2006, 80 mm thickness laid over sand cushioning layer & joints filled with sand in hardstanding etc, fabricated with M-40 grade concrete, complete all as specified and directed.

Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, etc (except tube light fittings), removing materials for taking credit and making good disturbed surface of wall, floors, etc complete all as directed by Eng-in-Charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit and all accessories, concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc complete including cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed for the following:-

One light point controlled by one switch.

One ceiling fan point controlled by one switch and fan regulator.

One exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps independent board.

One 3 pin socket outlet 5 Amps on the same board with other switch.

All as per item No. 88 here-inbefore but with 2.5 sqmm PVC insulated multistranded flexible unsheathed copper conductor inclusive of 2.5 sqmm PVC insulated multistranded flexible copper conductor for one independent 6 pin 16 Amp socket.

S & F switch piano flush type SP one way 6 Amp.

S & F switch socket combination 2 in 1, 3 pin, 6 and 16 amp flush type universal.

S & F switch socket combination 2 in in 1, 5 A flush type.

S & F ceiling rose surface polycarbonate body three terminal.

S & F stepped type electronic fan regulator flush type on the laminated sheet complete.

S & F ceiling fan complete with blades, down rod from existing roof / trus to fall ceiling, and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM , star rated including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed. Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard .

Supply and fix electric water heater, storage type ABS body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and directed Note : 1) Old electric water heater shall be deposited to AGE E/M store yard .

Supply and fix LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old unserviceable existing light fitting complete all as specified and directed.

S & F LED ceiling light fitting of size 600mm X 600mm, 36 Watt, 220 Volt AC recessed type with high efficiency PMMA diffuser with soft glare free light complete with drivers, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete including taking down old unserviceable existing light fitting complete all as specified and directed.

Taking down old existing fitting any type and S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copperconductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of sturdy engineering steel body complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of 450 mm sweep heavy duty including cutting of suitable size holes on existing wall and making good disturbed work to match the existing surfaces and exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed Note : 1) Old Exhaust fans shall be deposited to AGE E/M store yard .

Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. Note : Two runs of single core 6.0 sqmm and one run of 6.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S & F MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete all as directed by Engr-incharge.

S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 12 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed

S & F incl connecting MCB single pole, having rupturing 10KA, 6 amps to 32 amps as ordered 240 Volts

S & F MCB Single pole and neutral (SPN), having rupturing 10KA, 240 V 63 amps as ordered.

S & F MCB Triple pole and neutral (TPN), having rupturing 10KA, 240 V 63 amps as ordered.

S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket made out of GI pipe light grade 32mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete complete all as specified and directed

Taking down existing earthing and M & L Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level,connected to galvanised earth lead wire 4.0mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes etc and getting out in soft/loose soil complete

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete

Returning filling in excavated approved soil including spreading, leveling, watering and well ramming in layers n.exc 25cm in soil completed all as specified and directed

Supply and laying dry sand as cushioning to UG cable 8 cm thick before laying and 15cm thick after laying, punned as specified complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be measured and paid.

M & L Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks as protection cover of cable laid, complete all as specified and directed.

Supply and laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 25 sq. mm 4 Core nominal cross sectional area complete all as specified and directed

M & L for galvanized steel tubing light Grade of 40 mm dia protection of cable fixed to pole/walls or laid in floors, road crossing ducts with all necessary fittings and fittings and fixed with clamps, bolts, nuts and washers etc complete all as specified and directed.

Supply and laying in trenches of GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc , 25 mm bore of pipe complete all as specified.

Supply and laying in trenches of GI steel tubing medium grade including all fittings such as Tees, elbow, bends etc, 20 mm bore of pipe complete all as specified.

S & F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

M & L for cutting existing steel tubing for alterations or additions (Each cut measured) and inserting new Tee, bend, elbow etc up to 50 mm dia

Badri Electricals

City Light

Aggarwal brothers and company

Chanda Construction Co.