Madathilkadavu Mahilasamajam Kandathilpalli Road in Thiruvarpp GP, Ettumanoor LAC, Kottayam

Amount

Road work and structures

11.1.1.1 : Excavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.I.Ordinary soil(i)Upto 3 m depth

2.5.1.C : Dismantling of StructuresDismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.(I) By Manual Means(C) Reinforced Cement Concrete

2.7.B : Dismantling Stone Masonry as per Technical Specification Clause 202.Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202.(B)Rubble Stone Masonry in Cement Mortar

od586586/2020_2021 : Coconut Pile - Supplying and stacking well matured straight coconut post for driving down throug various strata bellow bed level including cost coveyance labour charges etc complete. (Derived from DAR 60.64.1)

od586587/2020_2021 : Coconut Pile - Driving down coconut pile to lines and levels through variuos strata including all hire charges and labour for fixing , staging platform and all other appliances necessary for pile driving down after pointing the bottom end (Derived From DAR 60.64.4)

od586589/2020_2021 : Cutting and removing the excess length of wooden piles to lines and levels and removing the cut end of piles and stacking within 150m (Derived from DAR 60.64.6)

11.2.1 : Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9I. Sand filling

14.8 : Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3

od799449/2020_2021 : Random rubble dry stone masonry using departmental stone modified (Mord 8.7..2)

od586594/2020_2021 : Random rubble dry stone masonry (Derived from 8.7.2 MoRD)

od586585/2020_2021 : RING BUND Type II Putting up ring bund with earth fille gunny bags of top width<br>1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to<br>form ring bund and maintaining the same leak proof till the completion of the<br>work and clearing the site by dismantling the bund after completion of the<br>work.etc.complete.

od586588/2020_2021 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump<br>set including conveyance to site and erection,cost of fuel, lubrication oil and other<br>stores, pay of staff etc complete

od801515/2020_2021 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br><br>I.P.C.C grade M 10<br><br>(i)Nominal mix 1:3:6

11.4.4 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203IV.R.C.C grade M 20

11.4.5 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203V. R.C.C. grade M 25

11.8 : Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202

12.5.4 : Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204For height upto 5 mIV.R.C.C. grade M 25

12.7 : Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

13.1.2 : Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5R.C.C M 25

13.3 : Supplying, fitting and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002,1010 and 1202

3.4 : Construction of Embankment with Material Obtained from Borrow Pits <br> Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

od797512/2020_2021 : Mechanical Stabilisation for Improving Subgrade&lt;br&gt;Construction of subgrade and earthen shoulders with approved material obtained from borrow pits mixed&lt;br&gt;with aggregate of certain percentage with all lifts and leads, transporting to site, spreading, mixing the spread soil in place with rotavator, grading with motor grader and compacting with the smooth wheel road roller at OMC to the desired density to form a layer of improved Sub-grade as per Technical Specification Clause 403.&lt;br&gt;&lt;br&gt;(B) By Mechanical Means Modified item (4.4.B)

od799986/2020_2021 : Mechanical Stabilisation for Improving Subgrade&lt;br&gt;Construction of subgrade and earthen shoulders by loosening the existing surface and mixing with aggregate of certain percentage with all lifts and leads, spreading, mixing the spread soil in place with rotavator, grading with motor grader and compacting with the smooth wheel road roller at OMC to the desired density to form a layer of improved Sub-grade as per Technical Specification Clause 403 and with lead upto 1000 m as per Technical Specification Clause 303.1&lt;br&gt;(B) By Mechanical Means Modified item (4.4.B)

od780409/2020_2021 : Supplying, providing and laying woven coir Geotextile fabric of type H2M5 (900gm/sqm, opening size 9 x 12, thickness 7.16 mm as per IS 15869 and IS 15872 with suitable laps, nails and trenches(as required) as directed by the departmental officers at site.

od800177/2020_2021 : Fillling above reinforced subgrade(coir geo textile reinforce subgrade etc.) as per drawing and technical specification Clause 305.3.9&lt;br&gt;&lt;br&gt;I. Sand filling modified Mord item 1.2.1

4.1.A.1 : Granular Sub-base with Well Graded Material (Table 400.1) <br> (A) By Mix in Place Method <br> Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. <br> (i) For Grading I Material

4.9 : Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

od791877/2020_2021 : Construction of un-reinforced plain cement concrete pavement ,thickness as per&lt;br&gt;design,over a prepared sub base,with 43 grade&lt;br&gt;cement or any other type as per clause 1501.2.2 M 30 (grade),coarse and fine aggregates conforming to IS&lt;br&gt;383,maximum size of coarse aggregate not exceeding 25 mm,mixed in a concrete mixer of not less than 0.2&lt;br&gt;cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side&lt;br&gt;formwork(steel channel, laying and fixing of 125 micron thick polythene film, wedges,steel plates including&lt;br&gt;levelling the formwork as per drawing),spreading the concrete with showels,rakes,compacted using&lt;br&gt;needle,screed, and plate vibrators and finished in continuous operation including provision of admixtures as&lt;br&gt;approved,curing of concrete slabs for 14 days,using&lt;br&gt;curing compound(where specified) and water finishing to lines and grade as per drawing and Technical&lt;br&gt;Specifications clause 1501. Short panelled of size 0.75m x 0.75m (Modified item 6.4). Extra labour and&lt;br&gt;machinery added for close joint cutting

3.14 : Construction of Subgrade and Earthen Shoulders<br> Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

13.6 : Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3

10.2.A.1.2 : Traffic Signs<br>A. Retro-reflectorised Traffic Signs <br> 1 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 <br> 2 600 mm Equilateral Triangle

10.2.A.1.3 : Traffic Signs<br>A. Retro-reflectorised Traffic Signs<br>1 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 <br> 3 600 mm Circular

10.4.A.2 : Direction and Place Identification signs with size more than 0.9 sqm size board<br> A. Retro-reflectorised Traffic Signs <br>2 Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

od797522/2020_2021 : Supplying and installation of delineator (Road way indicators) posts 80- 100cm&lt;br&gt;high above ground level, painted black and white in 15 cm wide strips, fitted with&lt;br&gt;min. 80 x 100 mm rectangular or 75 mm dia circular retro reflectorised panels at&lt;br&gt;the top with minimum visibility of 300m with provisions to prevent edge lifting and&lt;br&gt;vandalisam, and conforming to clause 806 , IRC-79 and the drawings including&lt;br&gt;fixing to ground (The deleniator shall be of approved type as per specification) firmly fixed in position by means of foundation of size 0.3mx0.3mx0.45m in M15 ( Modified item 8.15 from MORTH Roads)&lt;br&gt;grade concrete below ground level&lt;br&gt;

od797523/2020_2021 : Providing and erecting retro-reflectorised Object Hazard Marker 300mm x&lt;br&gt;900mm&lt;br&gt;Providing and erecting retro-reflectorised Object Hazard Marker sign with 07&lt;br&gt;years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09&lt;br&gt;micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick&lt;br&gt;/ aluminium composit material sheeting 4 mm thick with suitable back support&lt;br&gt;frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly&lt;br&gt;fixed 30cm above ground level by means of properly designed foundation with M&lt;br&gt;15 grade cement concrete 30cmx30x45cm, 45cm below ground level including&lt;br&gt;painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as&lt;br&gt;per approved drawing and clause 801.&lt;br&gt;300 mm x 900 mm(Data from MORTH 55.10.1)

od799385/2020_2021 : Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (Derived from 8.13 MoRTH Roads)

10.10.2 : Kilometre Stone Kilometre StoneReinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 2Ordinary Kilometer Stone (Precast)

10.10.3 : Kilometre StoneKilometre StoneReinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703iii)200 m stone (precast)

od990816/2020_2021 : Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserviceable materials as per direction of officer in charge Bamboo Modified item DAR 30.2.57.1

od990808/2020_2021 : Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserviceable materials as per direction of officer in charge &lt;br&gt;vetiver modified item DAR 30.2.57.1

od801557/2020_2021 : Grassing with &apos;Doobs&apos; grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed&lt;br&gt;In rows 7.5 cm apart in either direction (Derived item MORTH 11.2.2)

VANGUARD CONSTRUCTIONS

Bidder Name

T.D CHANDRASEKHARAN

VANGUARD CONSTRUCTIONS