ADDN ALTN TO STORE SHED NO CS 8 AND 52 A AT COD DEHU ROAD UNDER GE DEHU ROAD

Amount

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheet including fibre sheet etc as in roof covering etc complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including, Nain ital or similar pattern in roof covering including from ridge and valley gutters etc complete all as specified and directed

Dismantling wooden trusses upto 11.00 mtr span etc complete all as specified and directed

Dismantling unframed timber scantling 40 Sq.cm and over in section in any position etc complete all as specified and directed

Dismantling timber in fillets, rafters, purlins, etc. under 40 sq.cm in section unframed work etc complete all as specified and directed

Demolition wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl cover fillets of any description.including aluminium snap grids and hanging arrangements etc complete all as specified and directed

Dismantling Wrought iron MS work of any description and any position etc complete all as specified and directed

Demolition of brick work built in cement mortar complete and removing the rubbish outside MD land complete all as specified and as directed by Engr-in-Charge

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc and removing the rubbish outside MD land complete all as specified and as directed by Engr-in-Charge

Dismantling wall/ floor tiles incl cm bedding but not backing and removing the rubbish outside MD land complete all as specified and as directed by Engr-in-Charge

Taking down chowkhats or frames not exc 1.50 Sq.M (without taking off shutters from the frame).

Demolition of plain cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing the rubbish outside MD land complete all as specified and as directed by Engr-in-Charge

S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framings (beam, tee,angle, channel or flat sections) inclduing distance pieces, cleats etc.confirming to Fe-410-w(Gde-E-250)quality -B

S & F plates (plain or chequred) channels, square, cut or notched (ordinary and countersunk) forming holes complete confirming to Fe-410-w(Gde-E-250)quality -B

S & F for MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed end to be fitted with washers and one hexagoanl or square nuts, not exc 30 cm long, diameter of neck 16 to 20mm etc complete all as specified and directed

S & F 0.5 mm thick pre painted/coloured galvalum Al zinc coating GI based corrugated steel sheet of any colour having tensile strenth of 550 Mpa as in roofing fixing all as per manufactures instructions fixed on roof with all fittings and accessories.

Ditto as per item- 16 above but plain sheet as in ridge etc Make for Item No. 16 & 17- (i) TATA (ii) JSW (iii) ESSAR (iv) HINDALCO (v) INDALCO (vi) ASSOCIATED PROFILES AND ALUMINIUM LT

M & L for preparation of new or proviously untreated steel surfaces of any description over 10 cm width or girth & applying 2 coats of synthetic enamel paint over a coat of red oxide primer. Make-(a) LUXOL (Berger paint) (b) BROLAC (Johnson & Nicholson) (c) SUPERLAC (Shalimar Paints) (d) NEROLAC (Goodlass Nerolac) (e) APCOLITE (Asian Paints)

S & F band, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angles cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-290 Gde-E-165.

S & F 1.00 mm thick plain, galvanised, mild steel sheeting in valley gutters, drips and straight flashings (length and girth fixed) with grade of zinc coating 275.

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit complete as specified & directed by Engineer-in-charge.

S & F for 9MM Thick Pre-painted decorative accoustical board insulatin and accoustic purpose, 60x60cm to size, fixed in ceiling to snap grid frame work complete. Make for Item No. 21 & 22- Everest/Armstrong

S & F Framed work such as grills etc with ends of bar shouldered or revetted or forged into spikes framed guard bars including framed flat iron of any size and section for window grills/similar places confirming to Fe-290 gde E-165 complete all as directed by Engineer-in-Charge.

S & F steel ventilators/windows with centre hung shutters including two pairs of brass cup pivots, catch spring and pully wheel , complete. Make- (a) M/s Madhu Industries (b) Jangid Engineering Jaipur (c) Decan Structural Pvt Ltd Bangaluru (d) Chandni Industries (e)Ashwani & Sons (f) Anoop Industries (g) Trisul Industries (h) Ashish Industries

S & F 3mm thick sheet glass ordinery quality with oil putty nexc 0.50 sqm in each pane Make -(a) Saint Gobin (b) Asahi (c) Atul Glass Industries (iv) GOld unserviceableen Fish (v) Modi Guard (vi)Hindustan Pilkington Glass

Cutting holes into or through brick walls built in cement mortar of superficial area n. exc 150 sq.cm

M & L for brick work with sub class "B" brick straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6

ditto all as above but except bricks complete all as specified

M & L for rendering 10 mm thick in cement mortar 1:6 on Brick / conc. surfaces Even and fair

Preparation of newly plastered surfaces of wall and appling three coats of white wash complete.

M & L rendering 15mm thick in cm 1:4 on Brick / conc. surfaces or surfaces other than fairface of brickwork with incl admixture of WPC 3% by wt of cement. (WPC to be measured separately) including finished even and fair.

Supply only integral water proofing compound.

M & L for prep of newly plastered surface of wall and applying two coats cement base paint over one coat of white wash complete all as specified and as directed Make- (i)Super Snowcem (ii) Duracem (iii) Aquacem (iv) Shalimar (v) Berger

S & F Vitrified tiles 10 mm thk area of each tile 600x600x10 mm thk light shade as in flooring set and jointed in neat cement slurry and pointed in coloured cement laid over 15 mm thk screed bed in cm 1: 6 complete.

Ditto- As item 34 above but as in skirting / vertical surface on wall 10 mm thk in CM 1 : 4 Make for Item No. 34 & 35: M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for granite (of any type ) machine cut, , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of grqanite stone including and polishing including 15mm thick scread bed in CM 1:6 complete.

M & L PCC 1:2:4 mix, type B-1 (20 mm graded stone aggregate) as in bed blocks copling , etc including necessary form work complete.

M & L for PCC 75 mm thk Cement conc type D-2, 1:4:8 (40 mm gr agg) as in sub base for laying tiles complete.

M & L for PCC 75mm thick concrete 1:3:6 Type C2 for plinth protection,at every 3.0 Mtr intervals and turning , with joints shall with between sand Mix or bituminous mastic

S & F for 1.00 mm thick steel rolling shutters, gear operated with bevel gear box and crank handle, as specified including top covers, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete. Make- (i) Shree Lakshmi Engg Wks, Bangalore (ii) M/S Prakash & Co, New Delhi (iii) M/S Senthil Rolling Shutters & Engg Co, Chennai (iv) M/S Swastik Rolling Shutters, Mumbai (v) M/S Jayaraj Industries, Chennai (vi) M/S Darshan Rolling Shutters, Nasik (vii) M/S Shalimar Rolling Shutters & Co. (viii) M/S Ganesh Rolling Shutters Hyderabad (ix) M/S Shaparia Dock & Steel

Preparation of newly steel rolling shutters and appling two coats of aluminium paint complete. Make- (i) Asian Paints (ii) Nerolac Paints (iii) Berger Paints (iv) ICI Paints (v) Dulux

S & F for 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side laps fixed with coach screw and washer in roof , wall etc. Make- Lotus/ MG Polyplast Industries Pvt Ltd

M & L for Demolition of Concrete of any description and in any position not otherwise specifically provided for and removing the rubbish outside MD land complete all as specified and as directed by Engr-in-Charge

M & L Hardcore of broken stone of guage nexc. 63 mm deposited spread and levelled in layers nexc. 15 cm thk watered and rammed to true surface

M & L for cement concrete work in pavement /hard-standing of flexural strenth 40kg/per square centimetre in field using 400kg of cement per cubic metre, thickness of concrete 100mm all as specified

M & L for forming construction joints 65mm deep x 10mm wide filled with sealing compound Grade "A".

M & L for turbo ventilator fan propeller type to provide in aultarnet bays of the shed installation and fixing as specified by manufacturer instrutions.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for and removing the rubbish outside MD land complete all as specified and as directed by Engr-in-Charge

M & L for reinforcement cement concrete type B1, mix 1:2:4, (using 20mm graded aggregate) in lintels , beam, cantilevers, etc over 1.5m span including necessary form work etc complete all as specified

M & L for providing cement concrete type B1, mix 1:2:4, (using 20mm graded aggregate) in columns , pillars , boundary pillars and posts etc all as specified

Demolition of stone slabs and tiles of any description or thickness in floors, aprons (like chequered tile , Interlocking tile , granite , kota stone) etc, laid dry and pointed all as specified

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish outside MD land complete all as specified and as directed by Engr-in-Charge

M & L for 100mm thick PCC type D2, mix 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooring, paver blocks etc all as specified

M & L for 80mm thick Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006, M-50 grade, with gray cement and pigment including 30mm thick sand cushion below paver blocks all as specified

M & L for cement concrete in surface channels and drains with cement concrete (1:2:4) type B-2, using 40mm graded crushed stone aggregate complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and as directed.

Taking down carefully aluminium/copper point wiring (Light/Fan/Socket or power) complete including fitting fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting main switch/MCB DB BY disconnecting the electric supply including MCB/MCCB/Cut out etc and making good disturbed surface of wall/ceiling etc all as specified and directed.

M & L for Point wiring complete with and including 1.5 sq. mm single core multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade FRLS, ISI marked drawn through stove enammelled PVC conduit suitable size with accessories such as bend ,tees, junction boxes etc. incl. 1.5 Sqmm PVC insulated and unsheathed multi stranded copper conductor as earth wire including PVC premoulded switch board ISI marked suitable size for housing switch, socket and fan regulators etc . for (a)One light /fan/exhaust fan point controlled by one way 5 Amp switch.

As per Sr no 56 but for One 3 pin / 5 pin socket outlet 5 Amp on independent board but not below the switch in same vertical plane.

As per Sr no 56 but fo one 3 pin socket outlet 5 amps on the same board with other switches with cables 1.5 sq mm size

As per Sr no 56 but fo One 3 pin Socket outlet 15 amps on Independent board with switches but with cable 2.5 sq mm size. Make for Item No. 56 to 59- Make for Cable :Havells/Finolex/ Nicco/Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral

Taking down ceiling fan 1200/1400 mm sweep / exhaust fans including disconnection of electric connection and removing the blades in safe for reinstalling

Supply & fix ceiling fans BLDC complete with accessories 230 V,1200 mm sweep. BEE 5 star rated Make- Bajaj/Havells/Crompton Greaves/Orient

S & F ceiling rose surface PVC 50 mm dia three terminals including PVC mounting block, white/lvoury /Urea finish.

S&F switch piano, flush type 5 Amp single pole one way all as specified.

S&F Switch socket out let, flush type 5 pin 5 Amp all as specified.

S&Fswitch & socket out let, flush type 5 pin 15 Amp all as specified. Make for Item No. 62 to 65- (a) Anchor Roma (b) Legrand (c) Crabtree (d) Havells (e) Indo Asian (f) Polycab

S&F well glass in pdc Aluminium housing with fineless design and supierior performance with energy saving and having effiency of 110 Lm/wlngress protection of IP66 CAT PART NO LWV 12-40( CDL) of Crompton

M & L MCB DB TPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB TPN and MCB SPN ,415 Volts , 4 way

M & L MCB DB SPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 230 Volts , 8 way

supply and fix in repair isolator TPN 63 Amps 415 volts

supply and fix in repair isolator SPN 40 Amps 240 volts

supply and fix in repair MCB SP 240 volts 40 Amps

supply and fix in repair MCB SP 240 volts 6-32 Amps Make for Item No.67 to 72 : (i) Larsen & Toubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard

M & L submain wiring with 2 single core PVC insulated multistranded flexible copper conductor 1100Volts grade (FR) cables 4 sqmm and 1 run 2.5 Sq mm PVC insulated multistrand cu conductor cable (FR) of green colour for continious earthing drawn through PVC Casing caping/Conduit suitable size and with all accessories all as directed and specified by Engr-In-charge.( Note: Two runs of 4 sqmm, one run of 2.5 sqmm copper conductor and one run of surface/concealed PVC conduit of suitable size and with all necessary fixing accessories and making good disturbed surface area shall be measured as one length.) Make for Cable :Havells/Finolex/ Nicco/Plaza/ Anchor/ Polycab/ RPG/ GLOSTER/ RR Kabel/ KEI Make for PVC Conduit : (i) Anchor (ii) Modi (iii) Pressfit (iv) Precision (v) Astral Make for Casing caping : Precision/ Modi/Presto Plast/ Supreme/ Polycab/ Plaza/Pressfit

M & L for earthing complete with galvanised steel earth plate electrode 60cm ×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,earth wire protected by GI pipe 15 mm dia 'light grade' including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1, 40 mm thick RCC cover in 1:2:4 type B-1 reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe 'light grade' 20 mm bore all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

supply & Laying in repair cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter of following sizes:- Make :- Havells/ Polycab/ Gloster . for (a) 25 Sqmm x 4 Core Make- (i) Cable Corporation of India, Mumbai (ii) Asian Cable Co, Chattisgarh (iii) Finolex Cable Ltd, Pune (iv) Polycab (v) Gloster (vi) Universal (vii) RPG Cables Ltd , Thane (viii) Havells india ltd, Alwar (ix). RR Kabel (x) KEI Industries Ltd(KEI)

M & L in repair for 50 mm DWC HDPE pipe for UG cable protection through out from panel to all as specified and directed by Engineer-in-Charge. Make- (a) Rex Polyextrusion Ltd (b) Finolex (c) Prince Pipes and fittings ltd (d) Kisan (e) Supreme (f) JAIN IRRIGATION SYS (g) Astral

Taking out of old Panel & Supply instal testing and commissioning of CPRI approved factory make LT panel board outdoor type pedelstal mounted dust proof, weather proof, vermin proof front side double door hinge type with locking arrangement rear side single door hinge type with locking arangement, sheet steel cubical type with slanting roof made out of 3.00mm thick CRCA sheet with powder coated finished suitable length and size. High conductivity 3 phase and neutral Aluminium bus bar of 300 Amps capacity duly mounted on pre cast insulators including earth work excavation, PCC foundation necessary coping work, nuts and bolts and connecting electrically with suitable copper cable lug, cable glands etc complete all as specified and directed to accomodate the following items. Incoming:- (a) MCCB 100 amps 4 pole 16 KA - 1 Nos. (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of L&/Seimens/Schiender (c) LED type indication lamp for RYB. Outgoing: (a) MCCB 63 amps 4 pole 16 KA - 01Nos. (b) MCCB 40 amps 4 pole 16 KA - 02 Nos Make for MCCB : (i) Larsen & Toubro (ii) Siemens (iii) Schneider (iv) ABB (v) Havells (vi) Legrand (vii) Indo ASIAN (viii) C & S Electric (ix) Standard Make for meter- (i) IMP (ii) Automatic Electrical (iii) L&T (iv) Havells (v) MECO (vi)C & S Electric Ltd

M & L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3 ) mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth strip 25 X 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work inany strata,PCC Chamber with cover,Charcoal and Salt as required in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge .

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed : in Soft / loose soil

As per Sr No 79 but one in Hard / dense soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M & L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

H S TAKHI

SHAILENDRA B TULSANI

Shetty Construction Co

SLB Enterprises

M/s L. K. Agarwal

L.K.R.TIWARI CONSTRUCTION

Shree Constructions