PROVN OF HARDSTANDING VEH PARKING SHED WITH GARRAGE SURROUNDING WALL AT 161 MH AND PROVN OF FUEL INJECTION EQPT ROOM IN WKSP AREA AT 313 (I) FD WKSP COY PROVN OF PARKING AT P-22/10 FAFA AND PROVN OF 01 IRON GATE AT MH AT PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil)

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material (Soil) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in chajjas/shelfs complete all as specified and as directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for Fair finished surface of concrete

M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified.

M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified.

M&L form work to chullah hoods, chajjas/shelfs and similar items incl edges rough finished surfaces of concrete flat all as specified.

M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete.

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, and setting in cement mortar 1:6 complete all as specified and directed .

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, in half brick thick walls built in setting in cement mortar 1:4 complete all as specified and directed .

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finished fair and even complete all as specified and directed. (WPC measured separately)

M & L 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

M&L for 15mm thick screed bed in CM 1:4 mixed with water proofing compound as per manufacturer instruction , finishing the surface should be even and fair with out using extra cement , complete all as specified and directed. (WPC measured separately)

Supply only water proofing compound, complete all as specified and directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified.

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in floors finished rough and uneven complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

Forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A"

S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-12 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6., type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S & F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 35mm thick second class hard wood glazed and skeleton door shutters (three panels), open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framming plain, chamfered or rounded fitted with cut and mitred beads or securing glass etc, size of members of shutters all as per clause No 8.20 (a) of SSR Part-I (2009).

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 150 mm extruded aluminum alloy handles, fabricated type anodised.

M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

M&L for two coat OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine. Application to be done through the authorised applicator of manufacturer complete all as specified and directed.

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

M&L for Kota stone slab for stair case flooring 20-25 mm thick and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing in complete all as specified.

M&L for kota stone slab 20-25 mm thick in riser and tred single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified.

S&F SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples

S&F heavy duty outdoor tiles 600x600mm 12-14 mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

M&L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M & L for sand filling under floors or in foundation including watering and consolidation.

S & F machine pressed rubber moulded coloured precast conctete interlocking paver block/ Concrete cobble stones of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as specified and directed.

M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed .

M&L for preperation of plastered surface previously untreated of walls applying two coat of cement base paint over a coat of primer on walls complete all as specified and directed.

M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC concealed conduit 20 mm or higher dia, medium grade ISI marked complete with required size of modular sunken box and Modular cover plate for mounting Modular switch, socket and regulator & all PVC conduit accessories / fittings and including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.

Ditto as per Item No 52 but, (c) One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

Ditto as per Item No 52 but, (d) One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

Ditto as per Item No 52 but, (f) With 4.0 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 4.0 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F ,Modular Switch flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S&F Modular Switch, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F Modular Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps with sutter, complete all as specified and directed.

S&F Modular Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), with shutters, complete all as specified and directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&F Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

S&f white cover plate with frame modular type of 02 module complete all as specified and directed.

S&f white cover plate with frame modular type of 03 module complete all as specified and directed.

S&f white cover plate with frame modular type of 04 module complete all as specified and directed.

S&f white cover plate with frame modular type of 06 module complete all as specified and directed.

S&f white cover plate with frame modular type of 08 module complete all as specified and directed.

S&f metal flush box modular type of 02 module complete all as specified and directed.

S&f metal flush box modular type of 03 module complete all as specified and directed.

S&f metal flush box modular type of 04 module complete all as specified and directed.

S&f metal flush box modular type of 06 module complete all as specified and directed.

S&f metal flush box modular type of 08 module complete all as specified and directed.

S&f fans ceiling BLDC complete with electronic type regulator and accessories 230V, 1200 mm sweep min air delivery 210 CMM, BEE 5 star rated.

Supply and Fixing modular bell push 1 Module 240 volts flush type 5/6 Amps, single pole one way complete as all specified and directed.

Supply and Fixing bell electric multi music type, AC, SP 240 volts, sound as approved, complete as all specified and directed.

Supply and Fixing LED Bulk head Fitting environment friendly , IP-65/66, ultra modern,energy saving,surface mounting,decorative oval comprising of high brightness LED 10 Watt,6000 K complete all as specified and directed.

S&F inverter LED lamp, 6500K, 900lm in white colour of 12 Watt, base cap B-22 with polycarbonate diffuser and aluminium heat sink complete all as specified and directed.

S&f LED highbay light, 90 watt, complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x20 Watt,four feet long) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S & F 1x60 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

S&F Sub main wiring with two single run (with proper colour code as per IE rule) of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia medium grade ISI marked with and including necessary conduit accessories, concealed type including 6 Sqmm multi stranded copper conductor PVC insulated cable as earth wire(Green in colour) connected to common earth dolly, complete all as specified and directed.

S&F Sub main wiring with four single run (with proper colour code as per IE rule) of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia medium grade ISI marked with and including necessary conduit accessories, concealed type including 6 Sqmm multi stranded copper conductor PVC insulated cable as earth wire(Green in colour) connected to common earth dolly, complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

S&f sheet metal enclosure with socket plug top and MCb with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&f sheet metal enclosure with triple pole socket plug top and triple pole MCB with a three pin earth plug and socket complete with one single pole MCB 63 Amp complete all as specifieed and directed.

.S&F Socket residual current device with socket plug top and MCB with a three pin earth plug and socket complete with on DP MCB 25 Amp complete all as specified and directed.

Supply and Fixing MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 415 volts, made out of 16 guage sheet steel double door including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

S&F MCB DB sheet metal enclosure for DB, DP, 12 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA C Curve complete all as specified and directed.

Supply and Fix MCB DP 240 volts, 40 amps, C Curve of 10 KA complete all as specified and directed.

S&F MCB Triple pole & Neutral 415 volts, 63 amps, C Curve of 10 KA complete all as specified and directed.

S&f air curtain of 5 ft with air inlet 3200 cubic meter per hour, heating power range 2-25 KW complete all as specified and directed.

Supply, install, testing and commissioning of Hot & cold type split air conditioner complete unit, electric driven, single phase 230V, 50 Hz with copper pipe duly insulated and electrical cable of suitable size, mounting bracket and required accessories for installation and commissioning with following specification complete: (a) Capacity-1.5 TR/4500 K-Cal/Hr (b) Technology- Variable speed dual inverter technology. (c) Compressor Type- High EER Twin ratory compressor (d) Condenser coil-100% copper. (e) Operating voltage range-145V-270V (Without Stabilizer) (f) Star rating- 3 star (g) Air Filter- Anti dust, anti bacteria (h) 4 KVA Capacity voltage stabilizer, for 1.5 TR inverter type split AC, automatic operation, single phase naturally air cooled, indoor type & disigned for input variation between 140 volt to 290 volts, with output voltage stabilized at 230 volts with acuracy of =2.5%, and speed of correction 8 volts per second.

Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminium conductor of cross sectional area 4 core x 25 Sqmm including laying testing and commissioning complete all as specified and directed.

M&l for sand cushioning with dry and clean sand over and uhnder the cable in trench, duct for cable protection including levelling and consolidation complete all as specified and directed.

M&l for laying well burnt bricks, as in protection of cable laid dry, flat aboutting each other wide wise all as directed.

M&l for GI tubing 40mm dia light grade for cable protection all as specified and directed.

S&f surface mounting downlight LED round luminaire 10W, 6500K slim with celing with all as specified and directed.

S&f collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M&l for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surface complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard/dense soil all as specified and directed.

M&l for cement concrete 1:3:6, type C2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&l for PCC 100mm thick 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floors footings etc complete all as specified and directed.

S&f steel work as in tubular truss incl special shaped washer etc complete using erw or induction butt welded tubes confirming to IS

M&l plates (plain or chequerred) channels FE 410-W (Gde E-250) quality B, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&f mild steel as in plain angle cleats for securing purlins to wood trusses or rafters knee piece inserts two way and three way straps plate washers and similar work confirming to FE 410-0 or FE 310-0 complete all as specified and directed.

S&f mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long and 16 to 20mm diameter of neck.

S & F Pre-painted Trapezoidal profile galvalume aluminium zinc coating steel sheet 0.50mm thick (base metal thickness) of any colour having tensile strength of 550 Mpa minimum yield strength conforming to IS - 513 (1994) coated with hot dip alloy of 55% aluminium + 43.50%Zinc +1.50% silicon and finished with resin coat ( of thickness not less than 35 micron) on both surface @150gm/sqm of coating (total both surfaces) of approved colour as in roof covering/cladding, fixed with self tapping screws (make hilty/fissers), neoprene and epdm washers class 3 of AS-3566(5.5-14X5 for crest and 5.5-14X25 for valley fixed) with 150mm end lap and one corrogation side lap whereever required penetrations and lap in sheet shall be sealed by using proper sealant profile/HDPE fillers shall be provided whereever required to close voids between sheets and fastners etc. as in roof covering/ cladding in straight or curved surface in any height complete all as specified and directed. Note : The colour of sheet for bldg shall be approved by GE.

S & F machine pressed rubber moulded coloured precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade all as specified and directed.

M/s Rana Enterprises (BID ID -3479261)

M/S RAMESH SINGH ADHIKARI (BID ID -3481761)

m/s RC punetha (BID ID -3477611)

M/S KS Shahi and Sons (BID ID -3481129)

G R INFRATEH (BID ID -3483328)

basant ballabh punetha (BID ID -3477773)