DEPOSIT-MSN/WS/LI/ KOZHA-NABARD- MSN/WS/LI/2022-23 MVIP Irrigation providing water from Kuravilangad distributory to district agricultural farm state seed farm Kozha Kottayam dist- Supply and commissioning of 100HP pump and pipe laying work

Amount

Supplyof 1 Nos 100 HP motor pumps and 1 No.3 HP vacuum pump set

OD7935/2025-2026:Supply of Horizontal multistage Centrifugal pump with CI impeller and standard fittings capable of discharging 32 lps water against a total head of 129 mtrs with efficiency not less than 70%, NPSHR less than 3.3 mtrs coupled to an electric motor, 100 HP, TEFC, squirrel cage induction type, energy efficient IE2, max 1500 rpm working on 415 Volt, 3 phase, 50 Hz, AC supply continuous rating with class F insulation confirming to lS 12615:2018 with following accessories like base plate, mounting bolt with nut, foundation bolt with nut, coupling, coupling bolt with nut and coupling guard etc, from the original manufacturer.(The pump outlets to be coupled with a 200 mm diameter suction pipe and a 200 mm diameter delivery pipe).

OD7934/2025-2026:Supply of Fully automatic star delta starter for the above 100 HP Squirrel cage induction motor.

OD7936/2025-2026:Supply of vacuum pump set 3 HP, 3 phase, with common base plate, foundation bolt and nut with DOL starter

Erection and commissioning of 1 No 100 HP motor pumps with 1 No.3HP vacuum pump set and related pipe line works

OD7920/2025-2026:Erection of 100HP Motor with pump set in correct alignment after leading them from outside of pump house to the respective foundations including cost of labour, leading charge, hire charge of equipment, tools and plants etc. complete.

OD7921/2025-2026:Erecting 3 HP vacuum pump with motor set on suitable base plate by using suitable foundation bolt and nut

OD9306/2025-2026:Supply of S & S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:200m dia Ductile Iron Class K - 9 pipes

18.23:Laying in positing centrifugally cast (spun) iron S & S or flanged pipes (excluding cost of pipe)

18.73.3:Providing and laying Double Flanged ( Screwed / Welded ) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS: 8329 :200 mm dia Ductile Iron Double Flanged

18.26.1:Providing and laying flanged C.I. Standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :Upto 300 mm dia

18.68.1:Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 :Upt 600 mm dia

18.67.1:Providing and laying S & S C.I. Standard specials suitable for mechanical jointing as per IS 13382:Upto 300 mm dia

OD7928/2025-2026:Cost for transportation charge of delivery pipe from road to site ,including cost of man power,machinery,tools and plants etc.. complete but excluding cost of materials and laying charges.

18.83.5:Labour for cutting C.I. pipe with steel saw.200 mm diameter C.I. pipe

OD7925/2025-2026:Fabricating and Fixing MS flanges for connecting pipe lines to bends, reducers etc. including cost of material, labour , machinery, conveyance, painting, incidental and handling charges etc complete. (Conforming to PN 16 pressure rating standard).

18.70.3:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:200 mm dia pipes

18.30.5:Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:200 mm diameter pipe

OD7922/2025-2026:Providing and fixing C.I. double flanged Non Return valves conforming to IS 5312 part 1-1984, with complete with bolts, nuts, rubber insertion etc. 200 mm diameter (Conforming to PN 16 pressure rating standard)

18.31.4.2:Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 200 mm diameterClass II

18.12.3:Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work25 mm dia nominal bore

OD7923/2025-2026:Supply and fitting of strainer (SS) at suction side of pipe including painting as per the direction of the department officer at site(200mm)

OD7926/2025-2026:Commissioning of the pumps and motor and trial running as per the direction of the departmental officers at site including materials labour and conveyance

OD7927/2025-2026:supply and fixing manual pressure gauge upto 400 psi

OD7924/2025-2026:Supply and fixing of CI air valve confirming to IS 14848-2000,single orifice,small orifice type S1,size 40mm

OD7930/2025-2026:Supply of MS flats including cost of conveyance charges

OD7929/2025-2026:Fabrication and strapping of MS flat over bed as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD7931/2025-2026:Painting all the surfaces of the bends and strap with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD7932/2025-2026: Testing 200mm DI/CI pipeline with potable water to the required test pressure 200 mm dia Observed Data derived from item no.1020 of PHED DATA

OD7933/2025-2026:Conducting DP test for the longitudinal/circumferential welding of of MS/DI joints as per the specification and instructions of departmental officers including cost of all material, hire charges, conveyance etc. complete

Fabrication, painting and erection of new regulator shutter

OD7939/2025-2026:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD7940/2025-2026:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD7937/2025-2026:Supply of MS round bar including cost of conveyance charges

OD7942/2025-2026:Fabrication and erection of Embedded Parts for canal shutters(Up To 2 tonne weight) and accessories as per approved specifications, drawing and direction of deptl. officer at site including cost of labour, machinery all leads and lifts,incidental and handling charges etc complete but excluding cost of material already supplied.

OD7941/2025-2026:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platfurm and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD7945/2025-2026:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD7938/2025-2026:Erection of the canal shutter (Up to 2 Tonne weight) /Hoist Bridge /Platform including hand rails . lader etc for the same including, alignment correcting and setting complete including cost of all labour, machinery , incidental and conveyance, lead and lift charges etc complete but excluding cost of material already supplied

OD7944/2025-2026:provinding EN Screw rod 7.50ton capacity 4M lift screw hoist having one number of EN8 screw shaft having a lifting speed of around 5.00cm/Min for 24rpm of hand operation including cost of all materials, labour, hire charges and conveyance

OD7943/2025-2026:Providing base and nut arrangement for hoisting the shutter including cost of all materials labour etc

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Bidder Name

MOHAMMED MUSTHAFA V