Annual Plan-DPEKM - Pro.No.240/26 -DP Project-Renovation of Sports Pavilion in Chottanikkara GVHSS-Chottanikkara GP-General Civil Work

Amount

Renovation works

50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

OD102586/2025-2026: Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including

OD139788/2025-2026:14.53.1 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

OD391071/2024-2025:Translucent Acrylic Plastic sheet :-- Providing and fixing Translucent Acrylic Plastic sheet in panelling fixed in aluminium doors, window shutters and partition frames with CP brass/stainless screws etc complete as per architectural drawings and directions of Engineer in charge ( data from Estimate No.2021/100002 Translucent Acrylic Plastic sheet used instead of Hylum sheet)

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

OD397706/2024-2025:Providing and laying EUROCON FLOOT TILES of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in all colours, shades except white, ivory, gray, Fume red, Brown laid on 20mm thick mortar (1-cement :4- coarse sand )including pointing the oints with white cement and matching pigments etc complete

OD397324/2024-2025:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade one or more coats on old work. for painting existing roof truss truss work (labour provided double of specification No.14.54.1)

OD397356/2024-2025:Man coolies engaged for various works

OD397719/2024-2025:Carpenter engaged for various works

50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall

50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

OD442559/2024-2025: Supply and installation of ITF certified 5 layers acrylic system with thickness upto 2mm. 2. the flooring should have application as first layer of primer (% 100 acrylic latex based emulsion to improve bond of acrylic court system to the asphalt swface having consumption ratio of 0.014kg/sqft), second layer of acrylic Resurface (Filling and smoothing asphalt or concrete smface in preparation of Acrylic Volley ball Court/Badminton Court system. And also fills the surface chips, voids and conceals repairs whi le providing a smooth surface for colour coating. It should have a consumption ration of 0.046kg/sqft), 3. thi rd and fourth layer of Precoat (Quartz filled % 100 acrylic latex based textured Volley ball Court/Badminton Court with total consumption ratio of 0.078kg/sqft) and Fifth layer of Topcoat (100% acrylic latex polymer & color coat for the textured tennis coat with total consumption ratio of 0.078kg/sqft) and Fifth layer of Topcoat (100% acrylic latex polymer & color coat for the finished surface to protect from UV. It should have consumption ratio of 0.023kg/sft). On top of these 5 layers, the line 1nark:ing should be done with Overline paint (100% acrylic latex based high hiding line paints. It should have consumption ratio of 4 kg/court). 4. The acrylic resurfacer must have silica sand infill to be embedded into it with consumption ratio of 0.065 kg/sqft.

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

17.19.1:Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush) capacity- white

18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore

18.16.2:Providing and fixing brass stop cock of approved quality :20 mm nominal bore

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

12.48:Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

OD149023/2025-2026:11.36 Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

KURUVILLA K REJI (BID ID -2276250)

Bidder Name

C P Ajish

KURUVILLA K REJI