Construction and Furnishing of New Conference Hall of ADO Office, Umerkote, Dist - Nabarangpur

Earth work in excavation of foundation in all kinds of soil including moorum, stony earth mixed with boulders (except sheet rocks and boulders requiring blasting) with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the works etc. complete as directed by the Engineer-in-charge.

Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will betaken on finished compacted section only).

C.C.( 1:3:6) in foundation and floors using 4cm (1½”) size HGCB metal with all labour,cess and T&P required for the work etc. complete in all respect.

Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties and excluding GST of all materials with labour, cess and T&P etc. required for the work complete.

R.C.C. work M-20 grade using 20mm and 10mm size black hard crusher broken granite chips including hoisting lowering laying and centring shuttering and finishing the exposed surface smooth providing groves or beds wherever necessary including cost, conveyance, royalties and excluding GST and cost of all materials and labour with T & P required for the work etc. complete in all respect excluding the cost of M.S. Rods or Tor steel and binding wires and labour charge for bending binding and tying grills as directed by the Engineer – in charge.

(a) Column base, frustum

(b)plinth band

(c) Column and beam

(d) Stair case

(e)Lintel

(f)Chajja/fin Drop

(g)Roof Slab

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification including cost, conveyance and excluding GST of all materials with labour, cess and T&P etc. required for the work complete.

Fly Ash brick masonry in cement mortar (1:6) in Plinth & Foundation work using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and excluding GST of all materials with all labour, cess and T&P required for the work complete in all respect in all floors.

Fly Ash brick masonry in cement mortar (1:6) in Super strucutre work using fly ash bricks of 23cm x 11cm x8cm size having a crushing strength of not less than 75kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similarsuch type of works with all necessary projections watering and curing including cost, conveyance, royalties and excluding GST of all materials with all labour, cess and T&P required for thework complete in all respect in all floors.

20mm. thick grading plaster in c.m. 1:4 over roof slab and chujja including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

6mm. thick cement plaster (1:4) to R.C.C. surfaces finished smooth including closed deep chipping and slury treatment, cost , conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge .

16 mm (5/8”) thick cement plaster (1:6) finished smooth to inside rough surface of 9”/10” thick brick walls after rakingout the joints including watering and curing with cost withcost, conveyance, royalties and excluding GST of all materialswith all labour, T&P required for the work etc. complete.

12 mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the jointincluding watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&Prequired for the work etc. complete in all respect.

Supply fitting and fixing MS grill with Iron work wrought and put up in window grating including drilling holes in choukathas etc. complete as per direction of Engg-in-Charge . Data for 9.30 Sqm..

Fixing colour Vitrified tiles in floors (Printed Series) of size 600mm x600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar (1:1)and filling joints with white cement of approved quality including cost of all materials, labour T&P etc rrequired for the work all completeas per direction of Engineer-in-charge.

Fixing Vitrified tiles in dados (Printed Series) skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.

Fixing Floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge .

Fixing Ceramic Glazed wall tiles in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.

Fixing industrial Chequred tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge .

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151- 155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge.

Providing, fitting,fixing of Al.door with anodised Al.door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section no 9221 and 6 mm black glass in top portion with 12 mm thick prelaminated board in bottom portion fixed on door framed by means of tappered clip No-4660 and the frame to be completed by means of jointing angle No-1855 including all cost of labour,T&P ,hire charges of drilling machine,labour charges etc. complete as per direction of Engg-in-Charge .

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete including Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement , including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge.

Painting two coats with enamel paint one coat of primer of approved quality etc. complete as per direction of Engg-in-Charge .

Wall painting two coats with plastic emulsion paint of approved shade as per direction of Engg-in-Charge .

Wall painting two coats with weather coat paint of approved shade as per direction of Engg-in-Charge .

Supplying,fitting & fixing of stainless steel of 304 grade in Hand Railing using 50mm. Dia of 2mm. thick circular pipe with Balustrade of size 32mm.x32mm.x2mm. @ 0.90m. C/C and stainless square pipe bracing of size 32mm.x32mm.x2mm. In 3 rows in stair case as per approved design and specification,buffing,polishing etc. with cost, conveyance, taxes of all materials labour T & P etc. required for the completion in all respect etc. complete as per direction of Engg-in-Charge .

Borewell

Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination drilling rigs ( 1200 cfm/300psi) as required to suit to the site condition as per direction of Engineer-in-charge including use of own rig with its accessories, tools and plant, and consumables etc., for lowering of 200mm dia PVC/ GI Pipes for housing , fitted with socket and with or without well screen as per the necessity for soft, medium hard and boulder formation (GI/ PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well ).

Labour for drilling to accommodate 200 mm x 150 mm size vertical bore hole (0.00 to 100.00 mtr ). (0.00 to 30.00 mtr )

Lowering the following size GI/ PVC pipes with or without slotted pipes as per the necessity from ground level fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc., complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.

0 to 30 mtrs or more

Cleaning and developing the tube wells using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of Engineer-in-charge.

Supplying all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition .

With drawing of 150 mm dia PVC/GI casing pipe. 0 to 30 mtrs or more.

Filter Media (Gravel) with size varying from 40 to 60 mm at bottom to 2 to 5 mm (S/R 2022 Pg 240)

Cost of 150 mm dia Sch 80 PVC casing pipe ( As Per S/22 Page 141)

150mm diaPVC (C.S) END CAP 1 No@Rs 550.00/each

Cost of 1 no. 1.5 H.P Submersible Pump set having discharge 300 LPM with operating head of 40 mtr (12 Stage) 1Stage Head ,=,4 mt. (Kirloskar / Lubi) with Control Pannel

Electrical Flat CableCable (Electrical 4 mm Squre mm thickness)

Fittings such as Nipple,Reducer,Socket,NR valve,Sluice valve,8 mm² PVC coated wire rope.

Labour charges for installation of pump,pipe,panel,cable &other electrical equipments etc. including all material Cost & transportation of materials.

40 mm HDPE pipe

Electrification

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with one 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Group A

Group B

Group C

Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (For light plugs to be used in non residential buildings)

5 / 6 amp switch

3 pin 5 / 6 amp socket outlet

15 / 16 amp switch

5 pin 15 / 16 amp socket outlet

Providing & Recessed wiring to submain in 2 X following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

(2 x 1.5 sq.mm + 1 x 1.5 sq.mm)

(3 x 2.5 sq.mm + 1 x 1.5 sq.mm) (2.5 mm inverter line included)

(2 x 4 sq.mm + 1 x 1.5 sq.mm)

(2 x 6 sq.mm + 1 x 2.5 sq.mm)

Providing, Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Providing, Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply and fixing of Single 5 amp to 32 amp rating 240 V "B" series miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply and fixing of Single pole 5 amp to 32 amp rating 240 V "C" series miniature circuit breaker suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. Make- SEIMENS /HPL /ANCHOR /L&T /HAVELS /C & S/ RK

Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supplying and fixing of LED Light (Bulb/Tube Light)/Street Light/Flood Light of ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (Havells/Bajaj/Crompton/Phillips)

15 Watt LED Light Bulb

20 Watt LED Tube Light

30 Watt LED Light

50 Watt LED Flood Light

Supply, Installation, Testing and Commissioning of 48” AC ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (Bajaj, Usha, Khatian,Havells, orient)

Supply, Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Installation, testing and commissioning of exhaust fan upto 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC. (Bajaj, Usha, Khatian)

Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation , filling the trench etc. as required but excluding and cushioning , protective covering complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

PH Work

Laying of 110mm nominal diameter UPVC sewer line including cost of materials.

Fitting and fixing of 110 mm dia, 3.00 m long SWR ventilating pipe including cost of all materials

Supplying, fitting and fixing of 2000 liter capacity water storage tank along with construction of appropriate staging for fixing of the same as per specification and direction of engineer in charge.

Providing & Fixing to walls/floor the following nominal diameter pipe, fittings including cost of pipe, making good the damage, etc.

25mm dia PVC pipe in ground floor

20mm dia PVC pipe in ground floor

15mm dia PVC pipe in ground floor

Supply, fitting and fixing of CP concealed screw down stop cock of 15mm diameter.

Supply, fitting and fixing of chromium plated brass towel rail 25mmdiax450mm long complete including cost of all materials

Fixing 600 x 600 mm Bevelled edge mirror of superior glass mounted on wall tile and fixed to PVC plugs with Chromium Plated Brass Screws & Cap all complete as per specification.

Supply, fitting and fixing of brass or G.M.fullway valve of following nominal diameter etc. complete including cost of all materials.

Supply, fitting and fixing of C.P. screw down bib cock (tap) of 15mm diameter in ground floor

Supply, fitting and fixing of wash hand basin with hole (size 550x400mm)including fixing CP brass waste, fixing of 32mm PVC waste pipe, fixing 15mm dia CP pillar cocks, fixing 12mm dia connection pipe & water connection etc. complete including cost of all materials in ground floor and first floor as per specification and direction of engineer in charge.

Fitting and fixing of european closet in CC(1:5:10)using 40mm size cbhg metal including cost of materials in ground floor and first floor as per specification and direction of engineer in charge as per specification and direction of engineer in charge.

Supply, fitting and fixing of Parryware make PVC low level 10l capacity cistern with complete fixtures, all complete in ground floor and first floor as per specification and direction of engineer in charge.

Supply, fitting and fixing of following components at proper places, all complete in ground floor and first floor as per specification and direction of engineer in charge.

110mm single junction with door

110mm plain tee with door

110mm pipe clip

110mm PVC vent cowl

Please Enable Macros to View BoQ information