Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹16.2 LAccepted-AOC R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹18.1 L+₹1.9 L (11.8%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L-2 | Rejected-Finance Higher side quoted amount | |
| 3 | L-3₹18.8 L+₹2.6 L (16.2%)Rejected-Finance | L-3 | Rejected-Finance Higher side quoted amount |
Tender Value
₹17.1 L
EMD Value
₹34,140
Closing Date
8 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHUMBATHANG
CWE KHUMBATHANG
SPL REPAIR TO BLDG NO T-97 AND 10 X SECURITY LIGHTS OF 145 FD WKSP COY EME, PROVN OF 01 X DEEP REFRIGERATOR 500 LTRS CAPACITY AND 01 X REFRIGERATOR 300 LTRS CAPACITY AT 408 FD HOSP AT ACHINATHANG AND SPL REPAIR TO BLDG NO T-13 UNDER GE KHUMBATHANG
2022_MES_544707_1
80051/67/E8
Open Tender
Civil Works
Item Rate
180 days
GE KHUMBATHANG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE KHUMBATHANG
₹34,140
29 Sept 2022
11 Aug 2022
9 Sept 2022
11 Aug 2022
8 Sept 2022
25 Aug 2022
Amount
Schedule 'A' Part-I (B/R Portion) Dismantling plain or corrugated steel sheeting any guage, thickness including nainital or similar pattern roof covering and wall cladding complete all as specified and directed by Engr-in-Charge.
S&F of 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L and J type or cranked hook bolt as in roofs, walls etc with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge .
All as per Srl Item No. 2.00 above but except sheeting complete all as specified and directed by Engr-in-Charge.
S&F of 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
M&L for prepration of new steel & iron surfaces of any description, not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide/ zinc chrome complete all as specified and directed by Engr-in-Charge.
M&L for prepration of old steel & iron surfaces of any description, not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Dismantling of wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.
M&L for 12 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails to timber frame work in wall portion complete all as specified and directed by Engr-in-charge.
M&L for 9 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/ nails to timber frame work in ceiling portion complete all as specified and directed by Engr-in-charge.
Dismantling timber scantling in fillets,posts,rafters,purlins etc under 40 Sqcm in section in any position unframed work complete all as specified and directed by Engr-in-Charge.
M & L for 2nd class soft wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25 sqcm clean sawn secured with nails complete all as specified and directed by Engr-in-Charge.
M & L for 2nd class soft wood timber scantling plain fillets square, rectangular in section area exc 3 Sqcm and not exc 6 sqcm clean sawn secured with nails or brands as in lipping/beading complete all as specified and directed by Engr-in-Charge.
M&L for 1st class soft wood timber moulding sectional area not exc 6 sqcm as in cornices, rails, picture and the like complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame)exceeding 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and directed by Engr--n-Charge.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified and directed by Engr-in-Charge.
Taking down Shutters of any description exc 1 sq. m but n.exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.
S&F of Aluminium door window frame for door,window / ventilaror/partitions with one or more rebate including joining cleat for fixing etc (for double glazing shutter), complete all as specified and directed by Engr-in-Charge.
S&F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles (150mm) 02 Nos in each door, hinges (100 mm) 03 Nos in each door, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr-in-Charge.
S&F of Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, crews etc. complete all as specified and directed by Engr-in-Charge.
M&L for 9 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to aluminium frame work complete all as specified and directed by Engr-in-charge.
M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain printed colour PVC 'C' channel having a PVC sheet strip of 20mm width suck inside with solvent cement for tiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail& bottom rail; Paneling of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame and 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x10 mm (90 degree) used instead of exposed portion of PVC sheet beading as per specification ( including supply and fixing of fittings like PVC bow handles (150mm -2 Nos) ,sliding door bolts (200mm -1Nos), tower bolts (150mm -2Nos) etc complete all as specified and directed by Engr-in-charge.
S&F of 2nd class softwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.
M & L for preparation of new wooden surfaces and on new or previously untreated wooden surfaces of any description or girth exc 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
S&F of 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F of 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
S&F of Floor door stopper 150 mm (overall length of cover plate) of aluminium alloy body and tongue, nodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.
S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
S&F 150 mm aluminium anodised barral tower bolt of extruded section fixed with screws complete all as specified and directed by Engr-in-Charge.
S&F 100 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F 100 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F 100 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed by Engr-in-Charge.
S&F 75 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed by Engr-in-Charge.
S&F in repair for 25 mm dia mild steel (PVC coated decorative fancy type) curtain rod including brackets to hold rod in position ABS finials of approval quality etc, complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match the existing surface laid over 15mm thick avg screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beddeed and pointed in any mortar complete all as specified and directed by Engr-in-Charge.
M&L 20-25 mm thick machine cut kota stone slab flooring jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed of CM 1:4 over neat cement slurry @ 3 Kg/Sqm over sub base including rubbing and polishing complete all as specified and directed by Engr -in Charge.
S&F solid PVC door frame of size 50mm x47 mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed sheets reinforced with MS square tube, supplying and fixing in opening as per specification including fixing of fittings like hinges, holdfast etc.complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm bore size pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15 mm bore size Bib taps, cost copper alloy with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed complete all as specified and directed by Engr -in Charge.
S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding taps, wastes, chain and plug but including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge.
S&F in repairs wash down water closet white (Pedestal Pattern) with 'P' or 'S' trap including seat cover complete all as specified and directed by Engr-in-Charge.
S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern dual type,white low level with inlet, ball valve float handle including bracket with 32 mm bore PVC flush pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs Plastic water closet seat black closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge.
S&F in repair Chromium plated toilet paper holder of standard size complete all as specified and directed by engr-in-Charge.
S&F in repair Towel rail 20 mm dia, 600 mm long, D type brass chromium plated with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engr-in-Charge.
S&F of 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed by Engr -in Charge.
S&F of 110 mm PVC (SWR) bend complete all as specified and directed by Engr -in Charge.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F 3-layer PP-R Polypropylene random copolymer) concealed pipes of outer diameter 20 mm SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc compklete all as specified and directed by Engr-in-Charge.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed by Engr-in-Charge.
S & F in repairs 15 mm dia Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by engr-in-Charge.
S&F in repair PVC waste pipe 32mm dia for WHB, Urinal etc completed all as specifed and directed by Engr-in-Charge.
S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engr-in-Charge.
Schedule 'A' Part-II (E/M Portion) Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes complete all as specified and directed by Engr-in-Charge.
Material & Labour for point wiring with 1.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including PVC casing caping with fittings/accessories and PVC insulated, FRLS, 1100 volt grade un sheathed copper conductor of 1.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified for the following:-
(a) One light point/fan point/buzzer point Exhaust fan point controlled by one switch.
(b) One socket outlet 5 Amp on independent board complete
(c) One socket outlet 5 Amp on same board with other switch complete
All as per item No 61.00 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earth wire for 15 Amp socket outlet on independent board all as specified and directed by Engr-in-Charge.
Supply and Fixing switch piano flush button type 6 Amp single pole one way all as specified and directed by Engr-in-Charge.
Supply and Fixing switch piano flush type 16 Amp single pole one way ISI marked complete all as specified and directed by Engr-in-Charge.
Supply and Fixing socket out let multipurpose three pin 5 Amp and 2 pin 5 Amp flush type complete all as specified and directed by Engr-in-Charge.
Supply and Fixing socket outlet 2 in 1, three pin 5 Amp and 6 pin 15 Amp flush type (multi purpose) ISI marked complete all as specified and directed by Engr-in-charge.
Supply and Fixing lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fitting (angle /plain) complete all as specified and directed by Engr-in-Charge.
Supply and fixing MCB 40 Amp SPN 240 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed by Engr-in-Charge.
Supply and fixing MCB 6 to 40 Amp SP 240 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed by Engr-in-Charge.
Taking down existing light fittings and refixing the same complete all as specified and directed by Engr-in-Charge.
Supply and fixing of High power LED street light 120 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 65/66 roadway luminaire with high power LEDs as light source and heat resistant with electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated with impact and corrosion resistant complete all as specified and directed by Engr-in-Charge.
Supply and fixing hot pressure moduled SMC junction Box single door fixed with hinge of size 35x25x15cm,with closing arrangement with 10 Amp three phase and netural bus bar, internally wired nut bolts with suitable size of copper conductor and one No MCB SP 6 Amp mounted on din rail complete all as specified and directed by Engr-in-Charge.
Supply and Fixing of Street light fitting service bracket complete with 1.2m long G.I pipe 25mm dia med grade,45 degree bending making fixing arrangements with angle iron clamp as per the steel tublar pole dia ,incl nuts bolts,washer and painting with one coat of red oxide and one coat of silver paints complete all as specified and directed by Engr-in-Charge.
Supply, laying, jointing & testing in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor of size 10 Sqmm 2 core,1100 volt grade laid in trenches,ducts,drawn through pipes across the road/path/along poles/floors/equipment etc of following sizes complete all as specified and directed by Engr-in-Charge.
Supply and Fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 240 volt 20 Amps cap complete socket outlet 2 in 1, three pin 5 Amp and 6 pin 15 Amp flush type (multi purpose) ISI marked complete all as specified and directed by Engr-in-Charge.
Earthing complete with GI earth plate electrode of size 60cm X 60cm X 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including GI strip of size 32x6 mm up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of brass and protected by light grade 40mm dia upto 7.5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover 50mm thick and PCC chamber pit with PCC 1:2:4 type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing making test point and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old unserviceable complete all as specified & directed by Engr-in-charge.
Excavation in trenches not exceeding 1.5m in wide and not exceeding 1.5 m in depth for laying of pipe, cable, foundation of electric pole etc and getting out in hard/ dense soil, complete all as specified and directed by Engr-in-Charge.
M & L for removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed by Engr-in-Charge.
M & L for returning, filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed by Engr-in-Charge. Note:- Surplus soil if any shall not be removed but left over the trench.
M & L for sand cushioning with clean dry sand to cables with layer of sand 8 cm before laying of cable and 15 cm thick after laying of cable complete all as specified and directed by Engr-in-Charge Note:- For payment purpose punned thickness of 18 cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR part-I.
M & L for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other complete all as specified and directed by Engr-in-Charge.
Supply and fixing of Refrigirator fully automatic elect driven single phase 240 volt 50 Hz double door cap up to 300 ltr,complete all as specified and directed complete all as specified and directed by Engr-in-Charge.
Supply and fixing of deep freezer fully automatic elect driven single phase 240 volt 50 Hz double door cap up to 500 ltr,complete all as specified and directed complete all as specified and directed by Engr-in-Charge.
Dedcuct Credit for Demolished/Dismantled material Rs (-) 31,590.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.
KASHMIR FAIR DEAL SERVICES
M/S DUTTA ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .