Rectification of Navolimattom Check dam in ward No. 2 of Thirumarady panchayathin Piravom Constituency.

Amount

Reconstruction of pier

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

60.5.1 : DOWEL BARS - Supplying and providing MS dowel bars of size 20 mm dia , 1.5m long (1m in rock and 0.5 m in concrete ) including drilling holes of 25mm dia and filling the gap with cement grout ( 0.25kg/each) etc complete

4.1.4 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

13.9.1 : Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster

10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Supply of MS materials and MS rod for anchoring sill beam, seal track and roller track

10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Fabrication and erection of embedded part

od22764/2019_2020/IA : Fabrication, erection and commissioning of Structural steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied

Supply and fabrication of shutters using 10mm MS plate with stiffners as ISMC 100x50 and ISA 75x75x6

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od22773/2019_2020/IA : Fabrication and supply of Structural steel shutters and accessories as per approved specifications and deptl officers at site including cost of labour ,machinery , all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied Rate analysis for 9.6qtl fabrication

Fixing of Cast Steel wheel assembly consisit of 125mm dia.,100mm thk. with 32mm roller axle etc

od70227/2019_2020/IA : Supplying and Fixing of Cast Steel wheel assembly consisit of 125mm dia.,100mm thk. with 32mm roller axle etc.including cost of all materials,conveyance and labour charges etc.complete as directed by the departmental officer at site.

Supplying and fabrication of Hoisting mechanism cover using 6mm MS plate

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

od22771/2019_2020/IA : :Fabrication and supply of Hoisting mechanism cover structural steel confirming to IS2062Gras per approved specifications and directions of deptl officer at site including cost of labour, machinery,incidental and handling charges and allied works etc complete but excluding materialalready supplied.Rate analysis for 10Qtl fabrication

Supply and Machining of screw rod of outer dia 50mm, pitch of 12.70mm, root diam 37.30mm and Overhauling of Hoisting mechanism

od22767/2019_2020/IA : Overhauling the hoisting mechanism consisting of drive gears,driven gears. including remove, recondition, assembling etc including cost of allmaterials, machinery, labour, all lift and lead, incidental and conveyance charges etc. complete.

Fixing of shutter , operating mechnism,newly fabricated screw rod, platform and hoisting girder

od22768/2019_2020/IA : Erecting the canal shutter , operating mechanism ,hoisting girder and platform involving the work of lifting andplacing them, setting, aligning etc. including labour, hire and conveyance charge of tools.

Bidder Name

Saji O M