Hon CM ano No 370 2024 Work for repairing the statues of martyrs and the memorial at the Memorial site

Earth work in excavation by mechanical / manual means in foundation trenches or drains i/c lift upto 1.5 m, i/c disposal of surplus excavated soil within a lead of 50 m.

Filling available excavated earth in trenches, plinth in layers consolidating by ramming and watering, lead up to 50 m and lift upto 1.5 m.

P/L in position CC 1:4:8 (1 Cement : 4 c/sand : 8 st. agg. 40 mm size) excluding the cost of c/shuttering - All work upto plinth level.

P/L in position RCC 1:1.5:3 (1 cement : 1.5 c/sand : 3 stone agg. 20 mm size) ex. the cost of c/shuttering, finishing and reinf. - All work upto plinth level (in foundation).

RCC work 1:1.5:3 (1 cement : 1.5 c/sand :3 stone agg. 20 mm size) in walls (any thickness), all work above i.e. columns, etc. ex. cost of c/shuttering, finishing and reinf.

RCC work 1:1.5:3 beams,s/shades,shelf ,stair case,door bend and suspended slabs etc. ex. cost of c/shuttering, finishing and reinf.

Centering and shuttering i/c strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering i/c strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering i/c strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering i/c strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.

Reinforcement for R.C.C. work i/c straightening, cutting, bending, placing in position and binding all complete --TMT - bars.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 c/sand).

Brick work with F.P.S. bricks of class designation 75 in super structure above plinth level upto floor V level in cement mortar 1:6 (1 cement : 6 c/sand).

Half brick masonry with F.P.S. bricks of class designation 75 in super structure above plinth level upto floor V level in cement mortar 1:4 (1 cement :4 c/sand)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with U beading

Providing and fixing ISI marked flush door shutters non-decorative type35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, i/c cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete.

Providing and fixing pressed steel door frames manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb,lock jamb,bead and if required angle threshold of mild steel angle of section 50x25 mm,

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including ecessary excavation, levelling & dressing & finishing the top smooth.

P/F glass strips in joints of terrazo/ CC floors. -- 40 mm wide and 4 mm th.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade,

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

12 mm cement plaster of mix. 1:6 cement and coarse sand mortar.

12 mm cement plaster finished with a floating coat of neat cement of mix :

15 mm cement plaster of mix. 1:6 cement and coarse sand mortar in rough side of brick wall .

Distempering with oil bound washable distemper of app.brand (two or more coats) to give an even shade on new work over and i/c priming coat with cement primer.

Providing and applying white cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting wood work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand.

Painting Steel work with Deluxe Multi Surface Paint of req. shade (Two or more coats) applied over an under coat of primer approved brand.

P/F 4mm thick float glass panes with putty & nails.

Providing and fixing aluminium sliding door bolts, transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked,transparent or dyed to required colour or shade, with necessary screws etc. complete200x10 mm

Providing and fixing aluminium handles, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing Coupler 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing Bend 87.5° 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing Shoe (Plain) 110 mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

P/L Ceramic glazed floor tiles 300x300 mm 1st quality of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm th. cement mortar 1:4 (1 Cement : 4 c/sand) i/c pointing with white cement and pigment etc.

P/F 1st quality ceramic glazed wall tiles of approved make in all colours, shades except burgundy, bottle green, black of any size in skirting, risers of steps and dados over 12 mm th. bed of cement mortar 1:3 (1 cement : 3 c/sand) and jointing with grey cement slurry i/c pointing with white cement and pigment.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) in all colours and shades,laid on 20mm thick cement mortar 1:4 Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 Size of Tile 600x600 mm

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design..With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75 mm diameter

110 mm diameter

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing mirror of superior glass of ractengular shape (Approved Quality) size 435x357

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.20 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia

Providing and fixing brass bib cock of approved quality :15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality 15mm nominal bore

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm

Ridges plain (500 - 600mm)

Flashings/ Aprons.(Upto 600 mm)

Gutter (600 mm over all girth)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses et., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern

Pointing Stone work with cement mortar 1:3(1 cement:3 fine sand):Flush/Riled Pointing

Excavation in hilly area in soil by manual means i/c cutting and timbering of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20m.

Excavation in foundation for retaining & breast walls in alltypes of soils and rocks i/c lead, lift and disposal of surplus material.

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc.

H.P.Stone filling behind retaining wall/breast wall in back of walls i/c supply of all materials, labour T&P etc. required for proper completion of work.

RR stone masonary laid dry in breast wall, retaining wall i/c supply of all materials,labour etc. complete.

Providing and placing Ramnagar/Local patal over 20 mm thick cement mortar of mix 1:4(1 cement and 4 coarce sand including complete of all respects.