Renovation Work in Assistant Director Of Aggriculture Office Modasa, Dist.Arvalli.

Bill of Quantities

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

1 Removing and scraping of old deteriorated plaster of any 2649.00 Sq.Mt 19.92

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

2 Dismentling doors, windows, ventilators etc. (wood or 49.00 Each 191.85

steel) shutters including chowkhats architraves, holdfasts

and other attachment etc. complete and stacking them

within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

3 Excavation for foundation upto 1.5 m depth including 18.00 Cumt 122.99

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

4 Anti Termite System 362.00 Sqmt 134.33

P/L of Permenent piping technology Anti Termite treatment

before flooring work by installing LLDP (Low linear

density Polyethylene) tube of 8 mm O.D.& 6.4 mm

I.D.With in Built Pressure Compenstaion chif every 30 cm

interval in the tube, having working pressure of 2 kg/cm

and realese rate of 1.9 ltr/Hour fixed by P-Clip and nails .

The LLDP pipe shall be installed at the entire periphery of

the building and at internal network of building depth of

to 200 mm under floor every 2 to 3 mtr.c/c distance

(adjustble as per building layout ) & Ends of loop pass

through a PVC Elbow of minmum 32 mm ID at junction

box of wall and floor level, entring into a steel reinforcmed

grooved flexible pipe mini.22 mm LD leading into junction

box and during injecting chemicls for termite control

tretment. The anti-termite chemical Lmidcloprid 30.5% SC

Mix as per IS 6313(part-III) shall be injected by the pressure

pump diluted with water @ 10.5 ml/5ltr of water at the rate

of 2 kg/sq,cm.@ 5 ltr /Smt .the contractor shall submit

approved line plan for piping system and junction boxes

dully approved By Engineer -in-charge with bond of

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

5 Providing and laying cement concrete 1:3:6 (1-Cement : 3- 8.00 Cumt 3095.25

coarse sand : 6- machine cut stone aggregates 40 mm

nominal size) and curing complete excluding cost of

formwork in (A) Foundation and Plinth

6 Providing and laying controlled cement concrete M250 and 9.00 Cumt 4594.87

curing complete including the cost of formwork and

excluding reinforcement for reinforced concrete work in (A)

Foundations, footings and Mass concrete.

7 Providing IS Mark TMT FE 550D bar reinforcement for 315.00 Kg 95.04

RCC work including bending & placing in position

complete up to All floor Level

8 Brick work using common burnt clay building bricks having 11.00 Cumt 4214.33

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6. (1- Cement : 6 -fine sand)

(B) Conventional Floor Two Level

9 Providing 15 mm thick double coat mala cement plaster on 719.00 Sqmt 290.39

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar

(1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse

sand) finished with trovel including scaffolding curing,

10x10 mm grooves etc. complete. For Floor Two Level

10 Providing 10 mm. Thick cement plaster in single coat for 230.00 Sqmt 151.38

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand)

including Mala troveled finish etc. complete. Floor Two

11 20 mm thick Sand faced cement plaster with 18x8 mm 562.00 Sqmt 333.20

grooves as suggested by this office consisting of 12 mm

thick backing coat of C.M. 1:3 ( 1 cement : 3 coarse sand )

and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement :

coarse sand) for all heights as directed etc. complete. and

as per pattern sample aprroved by the architect or directed

engineer in-charge

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

12 Applying two coats of Acrylic lapy (putty) & two coats of 949.00 Sqmt 40.59

primer of approved brand and manufacture on new wall

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

13 Wall painting (two coats) with plastic emulsion paint of 719.00 Sqmt 52.19

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

14 Painting (two coats) with plastic emulsion paint of approved 230.00 Sqmt 88.47

brand and manufacture on undecorated ceiling surface to

give an even shade including throughly brushing the surface

free from mortar droppings and other foreign matter and

sand papered smooth.

15 Wall Painting (Two coats) with weather proof acraylic 868.00 Sqmt 73.75

emulsion paint of approved brand and manufacture and of

required shade on exterior wall surface to give an even

shade over and including primery coat with Alkaly

resistance primer of approved brand after thoroughly

brushing surface to remove all dust and remains of loose

powdered material etc. copm. for all height

16 Providing and fixing 1 mosquito net shutterand 2 shutter 3 30.24 Sqmt 3592.57

track window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24.10mm x 1.17mm

@ wt.of 0.738 Kg/mt , horizontal two track member size

92mm x 31.75mm x 1.50mm,@ Wt.1.07 Kg/mt , vertical

member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size

mmx18mm x1.29mm @ wt.of 0.547 Kg/mt, vertical

member of size 40mm x 18mm x 1.29 mm @ wt.of

0.547Kg/mt, Beading clip 19mmx 17.30mmx0.90mm @

wt. of 0.124 Kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc

17 Providing & Fixing in position standard extruded approved 1.80 Sqmt 2724.07

colour anodised Aluminum Ventilation with outer frame

x 25 x 1.50 mm Stander Box Frame @ Wt 0.833 kg/Rmt

with 5mm thick fixed ground glass and Mosquito net jali

fixed to alluminium strip blade fixed or adjestable

ventilation including all required materials, fixtures,

fastenning, labours and equipments as per detailed living as

directed. For Ventilators

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

18 Providing and fixing Single shuttered door having green 20.00 Sqmt 3477.43

marble frame with all open edges machine cut & machine

polished, fixed by zinc coated hinges with double shutter

of factory made & stamped I.S 12823 grade one, type one

35 mm thick solid core, melamine faced, three layered

resin, flushed door , having decorative lamination on both

sides & 12 mm thick teak wood beading fixed around the

door, Durable Grip shall be providing with both side 15cm

long stainless steel handle and necessary Locking system,

S.S. fixtures & fastenings etc. directed by engineer in

charge. Door from "NOVAPAN" OR Equivalent company

holding Licence for Minimum 5 years.

19 Providing and laying Ceramic tiles 6mm thick in flooring 18.50 Sqmt 994.37

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

20 Providing and laying coloured glazed tiles of the size 300 76.00 Sqmt 1487.88

skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

21 Providing and laying machine cut free edge machine 5.00 Sqmt 2023.03

Double polished granite stone 18mm thick finished treads

and risers in with 1cm projecting, nozing rounded moulding

in tread laid over 12 mm (av.) thick bases of cement mortar

1:6 (1-cement : 6-coarse sand) jointed with grey or colour

cement slurry including rubbing and polishing incl. making

Three No.s of grooves of size 3mm X 3mm along the length

of treads etc. complete

22 Providing and fixing mirror polished 14/18 mm thick Green 44.00 Sqmt 2012.93

Marble stone with full round edge and polished of approved

quality in clading on sill and around the doors/ windows/

ventilation with 12 mm thick cement mortor CM (1:4) and

fixing with cement slurry & adhesive including moulding of

exposed edges as directed by engineering in charge etc.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

23 Providinfg and fixing Safty grills of required pattern for 1318.00 Kg 112.11

windows/ Door using necessary 16x16 mm M.S. Square

bar, M.S flats and other structural steel at required spacing

including cutting, welding and fabriction etc. including one

coat of primer of approved quality and two coats of oil

painting as per detail living etc complete.

24 Providing erecting and fixing double coated Syntex PVC. 1500.00 Litre 3.95

(ISI) water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

25 Providing laying and jointing in true line and level 50mm 45.00 Rmt 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

26 Providing laying and jointing in true line and level 40mm 40.00 Rmt 148.12

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

27 Providing laying and jointing in true line and level 25mm 50.00 Rmt 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

28 Providing laying and jointing in true line and level 15mm 65.00 Rmt 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

29 Providing, laying and jointing in true line and level 110 27.00 Rmt 876.11

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp of the size 110 mm diametre x 149 mm

length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

30 Providing and fixing in PVC SWR cowel went 110mm dia 4.00 No 29.29

to pipes.(B) 110mm dia.

31 Providing and fixing wash down water closet (European 3.00 No 3055.25

type W C pan) with integral P and S trap including jointing

the trap with soil pipe in cement mortar 1:1 (1 cement five

sand) including providing and fixing plastic seat cover for

wash down WC with CP brass hinges and rubber buffers

back plastic seat and including providing and fixing PVC

flushing tank with a pair of C I or MS bracket with

complete fitting such as lead valve siphon 15 mm dia brass

ball valve with polythene float CP brass handle unions and

couplings for connection with inlet out let and over flow

pipes 40 mm dia porcelain enameled flush bend including

cutting holes in walls and making good the same connection

the flush bend with cistern and closet vitreous china.

32 Providing and fixing brass screw down stop tap.(A) 15mm 4.00 No 205.83

33 Providing and fixing ball cock of approved. quality as 4.00 No 189.84

directed.(A) Copper Metal (ii) 50mm dia.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

34 Providing and fixing pillar tap, capstan head, screw down 3.00 No 308.73

high pressure with screws, shanks and back nuts. (i) 15mm

35 Providing and fixing chromium plated brass half trun flush 4.00 No 263.77

cock of approved quality including fixing in pipe line etc.

complete (ii) 25mm dia.

36 Constructing brick masonry chamber for underground C.I. 6.00 No 3933.95

Inspection C.I. Inspection chamber and bends with briocks

having croshing strength not less than 35Kg. Cm2 in C.M.

1:5 precast RCC cover 500mmx 700mm intenal dimensions

with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with

cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete (i)

Inside dimensions 500mmx 700mm and 450mm deep for

single pipe line.

37 Providing and fixing in position 150 mm high, English 40.00 No 404.00

letters made from 1.0 mm thick stainless steel sheet as

directed by Engineer in charge with all necessary tools &

plants etc. complete.

38 Providing and fixing pre-cast Rubber Dye / steel Dye inter 93.00 Sq.Mt 706.93

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the

joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

39 Providing and laying water proofing treatment with china 326.00 Sq.Mt 1160.49

mosaic tiles flooring over avg 50 mm C.C. 1:2:4 bedding

for maintaining slope for plain and curve surface & 12 mm

to 20 mm of broken piece not more than 2.5CM of ceramic

/ glazed tiles ( one for more colour as directed ) to be laid

over cement mortar bedding of C M 1:3 (1 cement : 3 sand )

contain water proofing materials per bag of cement useas

specified by manufactured and slops to be tempered to bring

mortar up to surface with using white cement and colour

pigment including rounding of junctions and extending

them up to 15 cm along the wall and curing with bends any

patens or design as per living and cleaning by using oxalic

acid etc. complete.

40 Seminar Chair /Chair with desk board. Providing and 60.00 No 5226.75

supplying chair with side desk (foldable mechanism) made

with 19 mm Thk MDF board (M7) fixed with M.S structure

armrest fixed with required necessary fixtures and fastening

(Hardware) (M24).Top part of desk finished with 1.00 mm

Thk decorative laminate (M24). Back and side part of desk

finished with enamel paint (M31) as per architect’s selection.

Seat & back portion of chair are made of 12mm thk. hot

pressed plywood upholstered with changeable fabric

upholstery covers (as per requirement) and molded PU foam,

together with molded seat & back covers. The back foam

should be designed with contoured

lumber support for extra comfort. The size of chair 45cm x

38cm (Back side) and 45cm x 43cm (seat size). The PU foam

should be molded with density =45 ± 2 kg/m3. The armrests

with Leg made with Powder coated MS structure as per

architect selection. The Seat and back fixed with MS structure

with required necessary hardware. As per Instruction of EIC &

User Department.

41 Conference Hall Table 5.00 Rmt 5544.90

Size : 1 Rmt x 700D x 750H

supplying & providing conference Hall table of 700mm

depth & 750mm hight TOP to be made of 25 mm thick

Plywood board with 1mm thick Laminate from both side,

MODESTY PANEL @ 600H to be made of 18 mm thick

Plywood board with 1mm thick Laminate from both side,

METAL understructure to be made of Metal powder coated

4. 1 Tier Cable Tray, Access Falp & Snake :- For Wire

Manager etc. complete as per drawing & direction given by

Engineer in charge.

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

42 Providing,fixing CRCA two Shutter for Fixed cupboard . 35.00 Sq.mt 1818.00

Door Shutter should have thickness of 0.8mm (high yield

strength) and all other components shall have a thickness of

0.9mm. These components shall be made of CRCA ‘D’

grade high yield strength as per IS:513. The Shuuter have a

Mazak handle and Three way locking mechanism with

Shooting Bolts. The finishing shall include Epoxy powder

coated to the thickness of 50 microns (+/- 10). as per

Instrcution Of Enginer Incharge

43 Supplying and placing of Work Stations (computer Table) 6.00 No 6767.00

consisting 80 mm th. & 1.2 m high modular partition, Magnetic

board,marker board,cable raceway with metal covers,provision to

pass cables inside partition, 25 mm thk.

& 600 mm deep PLB worktop, Key board Frames :- Partition

thickness is 80mm for stability and with the inside gap between two

tile is approximately 50mm for higher wire carrying capacity. Frame

Horizontals are made of 1mm thick CRCA sheets & the verticals are

made of Aluminium Extrusions of 1.5mm thick Frame Horizontals

are made of 1mm thick CRCA sheets & the verticals are made of

Aluminium Extrusions of 1.5mm thick All the frames will be duly

powder coated based on the choice of the Powder Coat colour , as

per Customers choice, which will be inline with the Top trims & end

trims All the frames are fastened together by means of M6 NUTS &

BOLTS . Galss Seprator of 12mm Glass with Diamond polish and

contoured cutting to be fixed. They can be attached to form a 2-way,

3-way or a 4-way configuration. All the Caps viz end, inline &

universal & raceway caps are made out of Die-cast Aluminum.

These caps also are finished in an epoxy powder coating finish in the

same color. All the frames are fitted with M10 leveling bolts. Table

tops and Gable ends Should of 25mm thk Pre-laminated

particleboards conforming to IS : 12823 Interior Grade. Specially

designed powder coated M.S. brackets fixed to the partition frame

support the tabletops. Gable ends are of 25mm thk. both side

laminate (BSL) with 2mm PVC imported edge banding on front

side. Sealed edge in table top and gable ends are with 0.8mm PVC

imported edge banding. PVC edge banding are imported from

Rehau or Dolken of Germany. SIZE: 1200 x 600 x 740mm(Rate

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

44 Providing and fixing powder coated alluminium standared 9.00 No 2589.64

extruded section partely panelled and partly glazed fixed

type partition with single or Double Shutter door of

alluminium section of 63.5 x 38.10 x 1.95 mm avg. thick

having weight 1.094 kg / Rmt inclg. single cabin door with

frame of powder coated all.sec of size 63.50 mm x

mm x 1.95 mm (wt. 1.094 kg/mt ) and Vertical Rail section

size 47.60mm X 44.50mm X 1.52mm ( wt. 0.881 Kg/Rmt)

Top & Bottom Rail 114.30mm X 44.50mm X 1.50mm (wt.

1.367 Kg/ Rmt), middle rail 83.50mm X 44.50mm X

1.50mm (wt. 1.139kg/Rmt) including 12 mm thick both

side exterior grade prelaminated particle board of approved

quality and shade including fixing in true line and level at

bottom pannel and 5 mm thick glass at top pannel

including all fixtures and fastening like Mortice lock,

glazing clips,rubbers,gaskets and hardware and labour as

required etc complete.

45 Medium back revolving & tilting chairProviding and 5.00 No 9019.30

supplying Medium back chair HOF make Z406 model or

equivalent for conference with M.S. frame work.

Upholstered with changeable fabric upholstery covers

(as per quirement) andmolded PU foam, together

with molded seat & back covers. The back foam

should be designed with contoured lumber support

for extra comfort. Caster of high durability & hydraulic.

The chair should have cylinder with 5 years warranty. The

size of chair 47.5cm x 58cm (Back side) and 49cm x

48cm (seat size). The PU foam should be molded with

density = 45 ± 2 kg/m3 with One-piece armrests. The

armrests are scratch and weather resistant. The permanent

contact mechanisms are designed with 360°

revolving type, with pneumatic height adjustment &

17° maximum tilt only & tilt tension adjustment facility.

46 Dismentaling tiled of stone floors laid in mortar including 326.00 Sq.Mt 49.18

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

47 Steel work, welded in built up sections framed work 26.00 Quintal 9108.49

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

Rates Total Amount

Rates Total Amount

Item of work Quantity Unit to estimated

48 Providing corrugated G.I. sheet of class-3 roofing fixed with 36.00 Sqmt. 734.19

glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding the cost

of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Total Cost of Construction Cost

(Rupees Twenty Seven lakh Fifty One Thousand Two Hundred Fifty Three and Eighty Eight Paise Only)

I/We am/are willing to carry out the work at ………………………………………………..% above/below (percent

should be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out

*Estimated amount *Estimated amount

Put to tender Rs…2751253.88 Put to tender Rs.2751253.88

Deduct ……. % below Rs……………………..…. Add ……. % Avove Rs…………..….

Net Rs. …………………….… Total Rs. ………….…

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

4 there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5 Dismentalling of Credit materials amounting of Rs. -3800.00/- must be recovered from Contractor's respective

Deputy Executive Engineer Executive Engineer

(R&B) Sub Division (R&B) Division