Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-AOC VILL POST BARANACHINA PS DINHATA DIST COOCH BEHAR 736135 | COOCHBEHAR | WEST BENGAL | 736135 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹33.7 L+₹1.1 L (3.32%)Rejected-Finance MINISTRY OF DEFENCE MES JALPAIGURI WEST BENGAL | L2 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER | |
| 3 | L3₹34.6 L+₹2.0 L (6.08%)Rejected-Finance MES CHOWPATTI HASIMARA DIST JALPAIGURI WB PIN 735215 | HASIMARA | JALPAIGURI | WEST BENGAL | 735215 | L3 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER | |
| 4 | L4₹36.4 L+₹3.8 L (11.5%)Rejected-Finance BHAGWATI BHAWAN PO HASIMARA DIST JALPAIGURI PIN 735215 | ALIPURDUAR | WEST BENGAL | 735215 | L4 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER | |
| 5 | L5₹38.1 L+₹5.5 L (16.8%)Rejected-Finance 234 4 JC BOSE ROAD KOLKATA | KOLKATA | WEST BENGAL | 700001 | L5 | Rejected-Finance BEING OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/S SARKAR BROTHERS L5 | M/S JAGDISH PRASAD AGARWALA L4 | BHARAT ELECTRIC L3 | M/S I P GROUP L6 | PULAK SAHA L1 | NARAYAN MAJUMDER L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlars facing dressed stonework & precast concrete articles complete all as specified and directed. | 62.4 | CUM | 300 ₹18,720 | 400 ₹24,960 | 501 ₹31,262.4 | 1,500 ₹93,600 | 227 ₹14,164.8 Lowest | 500 ₹31,200 |
| 2.00 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of roofs, floors (other than ground floors), beams, stair cases, landing, chajja and similar suspended work complete all as specified and directed. | 5.02 | CUM | 410 ₹2,058.2 Lowest | 500 ₹2,510 | 500 ₹2,510 | 1,300 ₹6,526 | 517 ₹2,595.34 | 600 ₹3,012 |
| 3.00 | S&F for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and
the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. with and including one shop coat of red oxide zinc chrome primer paint on structural steel surface including preparation of surfaces at contractor's workshop before febrication and similar small articles conforming to Fe-410-W, (Gde-E-250) quality-A complete all as specified and directed. (Note:- The rates given below allow for cutting to dead length where required, notching, drilling, fitting, riveting and/ or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gussets plates, etc. also for welding, plumbing, truing up and fixing complete.) | 21,762.07 | KG | 135 ₹29,37,879.45 | 129.99 ₹28,28,851.48 | 125 ₹27,20,258.75 | 142 ₹30,90,213.94 | 117 ₹25,46,162.19 Lowest | 120 ₹26,11,448.4 |
| 4.00 | S&F of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or forged into spikes; framed guard bars; barred iron doors; ladders, railings, framed brackets, walk ways, frame work of water tank and similar work conforming to Fe-290-0 Gde-E-165 complete all as specified and directed | 2,006.55 | KG | 152 ₹3,04,995.6 | 130 ₹2,60,851.5 | 140 ₹2,80,917 | 136 ₹2,72,890.8 | 127 ₹2,54,831.85 | 120 ₹2,40,786 Lowest |
| 5.00 | S&F for rolled mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment of Fe 410-W (Gde E-250) quality -A including painted one shop coat of zinc chrome primer paint including preparation of surface at Contractor's workshop complete all as specified and directed. (Note:- The rates given below allow for cutting to dead length where required, notching, drilling, fitting, riveting and/ or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gussets plates, etc. also for welding, plumbing, truing up and fixing complete.) | 2,363.96 | KG | 138 ₹3,26,226.48 | 140 ₹3,30,954.4 | 120 ₹2,83,675.2 Lowest | 142 ₹3,35,682.32 | 127 ₹3,00,222.92 | 120 ₹2,83,675.2 Lowest |
| 6.00 | S&F of Expanded metal weight per square meter not exceeding 4Kg cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. | 224.64 | KG | 138 ₹31,000.32 | 160 ₹35,942.4 | 70 ₹15,724.8 Lowest | 140 ₹31,449.6 | 147 ₹33,022.08 | 150 ₹33,696 |
| 7.00 | M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm width or girth complete all as specified and directed. | 993.84 | SQM | 110 ₹1,09,322.4 | 100 ₹99,384 | 65 ₹64,599.6 | 144 ₹1,43,112.96 | 47 ₹46,710.48 Lowest | 90 ₹89,445.6 |
| 8.00 | Excavating in post holes (or similar holes) in soft /loose soil each not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good the surface complete all as specified and directed. | 156 | EACH | 180 ₹28,080 | 125 ₹19,500 | 80 ₹12,480 Lowest | 400 ₹62,400 | 167 ₹26,052 | 250 ₹39,000 |
| 9.00 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. | 6.24 | CUM | 4,800 ₹29,952 | 4,000 ₹24,960 | 4,250 ₹26,520 | 6,000 ₹37,440 | 3,897 ₹24,317.28 Lowest | 4,000 ₹24,960 |
| 10.00 | Disconnecting existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed. | 39 | EACH | 300 ₹11,700 | 200 ₹7,800 | 450 ₹17,550 | 700 ₹27,300 | 127 ₹4,953 Lowest | 200 ₹7,800 |
Tender Value
₹41.0 L
EMD Value
₹82,040
Closing Date
17 Feb 2026, 6:00 pmClosed
CWE BINNAGURI
HQ CWE Binnaguri, Binnaguri Cantt
SPECIAL REPAIR OF WATER TANK STAGING FROM BRICK WORK TO FRAMED STEEL STRUCTURE AT CERTAIN BLDG OF 452 COY ASC AND JAK LI AND 15 SIKH LI AND 166 MTN BDE CAMP IN HASIMARA MIL STN UNDER GE SOUTH BINNAGURI
2026_MES_750127_1
8332/E8
Open Tender
Civil Works
Item Rate
180 days
GE SOUTH BINNAGURI
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (S) BINNAGURI
₹82,040
Yes
1 Apr 2026
27 Jan 2026
18 Feb 2026
27 Jan 2026
17 Feb 2026
10 Feb 2026
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlars facing dressed stonework & precast concrete articles complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of roofs, floors (other than ground floors), beams, stair cases, landing, chajja and similar suspended work complete all as specified and directed.
S&F for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. with and including one shop coat of red oxide zinc chrome primer paint on structural steel surface including preparation of surfaces at contractor's workshop before febrication and similar small articles conforming to Fe-410-W, (Gde-E-250) quality-A complete all as specified and directed. (Note:- The rates given below allow for cutting to dead length where required, notching, drilling, fitting, riveting and/ or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gussets plates, etc. also for welding, plumbing, truing up and fixing complete.)
S&F of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or forged into spikes; framed guard bars; barred iron doors; ladders, railings, framed brackets, walk ways, frame work of water tank and similar work conforming to Fe-290-0 Gde-E-165 complete all as specified and directed
S&F for rolled mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment of Fe 410-W (Gde E-250) quality -A including painted one shop coat of zinc chrome primer paint including preparation of surface at Contractor's workshop complete all as specified and directed. (Note:- The rates given below allow for cutting to dead length where required, notching, drilling, fitting, riveting and/ or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gussets plates, etc. also for welding, plumbing, truing up and fixing complete.)
S&F of Expanded metal weight per square meter not exceeding 4Kg cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm width or girth complete all as specified and directed.
Excavating in post holes (or similar holes) in soft /loose soil each not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good the surface complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Disconnecting existing water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.
M& L for only cleaning and removing all scale and dirt, etc, from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs of 20mm dia Nipple suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm-45gms /25mm- 65gms) complete all as specified and as directed. (1)The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
8332Tenderdocuments.pdf
Tender Documents • 1.34 MB
BOQ_840140.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .