WORK SERVICES FOR IMPROVEMENT OF CERTAIN SMQS AT AF STN SAMANA UNDER GE (AF) NO 1 JAMNAGAR.

Amount

Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 2 km complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:4 on stone masonry surfaces for skirting/dado etc, complete all as specified and as directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for Non skid, ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc laid over and pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L, Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections complete all as specified and as directed.

Cutting chases, pinning in, making good to facings on stone concrete, block or slab wall, where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth ccomplete all as specified and as directed.

S&F 20mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 32mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F in repair 15mm size chromium plated angular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs fancy type chromium plated, long shank & cup (concealed type) 15mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15mm dia size chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs two way bib cock brass chromium plated, fancy type complete all as specified and as directed.

S&F in repairs two way angle valve brass chromium plated, fancy type complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union ccomplete all as specified and as directed.

S&F in repair Vitreous China wash basin, angle back, size 400 x 400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32 mm dia brass waste coupling and, waste fitting and union complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F in repair Low density polyethylene pipes (LDPE) 32mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc

S&F in repair brass chromium plated shower rose 100 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed.

S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as specified and as directed.

S&F in repair Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and as directed.

S&F in repair Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 600mm x 250 mm complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and as directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed.

S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern, duel flush type (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and as directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and as directed.

S&F in repair chromium plated grating 100mm size with or w/o waste hole complete all as specified and directed

Dismantling and disconnecting of existing cast iron or reinforced concrete drain pipes, jointed in cement mortar 75/100 mm dia bore fixed to wall, laid in trenches complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door in repair complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) branch piece, double (double Y) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.

M&L for 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door in reapir complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) junction single, (Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and as directed.

S & F 110 mm bore of pipe PVC vent cowl fixed to PVC pipes in repair complete all as specified and as directed.

Demolition of brick / stone / PCC block masonry / RCC Jalli fixed in cement mortar including all quoins, pillars, arches etc. all as specified and as directed.

M & L for precast cement concrete (1:5:8) (using 20mm graded stone aggregate) solid building blocks exe 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars complete all as specified and as directed.

Demolition of RCC of any descrition such as Kitchen chimniy, chajja, shelves, OHT Tanks,Pilar,wall, column.beam etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L Reinforcement cement concrete type B-1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel and similar wks complete all as specified and as directed.

M&L for mild steel corrosion resistence steel (CRS) TMT reinforcement bars of grade Fe-500 D / 550D, 10 mm dia and over cut to length and bent to shape required or in sturrups etc including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specified and as directed.

M&L for mild steel corrosion resistence steel (CRS) TMT reinforcement bars of grade Fe-500 D / 550D, 6mm to 8mm dia and over cut to length and bent to shape required including cranking, bending spirally for hoping for columns, hooking end and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specified and as directed.

Use and waste of Form work to sofites of suspended slab such as roof slab, floor slab , landing, chajjas, lintel and similar work for rough finish surface.complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for plastering 10mm thick on concrete surface in CM 1:4, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacture instruction complete all as specified and directed. (Note: WPC will be measured & paid separately.)

Supply only liquid water proofing chemical mixed @ 200ml/Bag of cement complete all as specified and directed.

Applying coating (02 coats) of Pidifin 2k (of Make Dr Fixit or equivalant) @ (not less than) 1.54 kg/ Sqm in two coats on sunken surfaces of toilet & bathroom and similar situation all as recommended by manufacturers complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in fdn filling and mass concrete etc complete all as specified and as directed.

S&F for 60cm long, 40mm dia bore GI Tubes medium grade galvanised with all fitting laid in wall for suken floor complete all as specified and as directed.

Taking down cement plaster of any thickness in cement or cement lime mortar on brick or stone or PCC block walls etc including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, complete all as specified and as directed. Note :Quoted rates deemed to includude to carry out work at height up to 8m including provision of scafolding and safety arrangements.

M&L for two coats of wall care putty over plastered surface of wall including rubbing with sand paper to prepare the surface even and smooth complete all as specified and as directed.

M&L for two coats of wall care putty over plastered surface of ceiling including rubbing with sand paper to prepare the surface even and smooth complete all as specified and as directed.

M&L for rendering 15 mm thick or more on stone masonary / brick / concrete surface of walls in cement mortar 1:6 finished even & smooth without extra cement complete all as specified and as directed.

M &L for 2 coats of oil bound distemper on new surfaces of walls including preparation to distempering to match with existing work complete all as specified and as directed.

M & L for rendering 10 mm thick in patches on fair faces of brick or concrete surfaces in CM 1:3 as on ceiling, facia roof projection etc finished even and smooth without using extra cement complete all as specified and as directed.

M &L for 2 coats of oil bound distemper on new surfaces of ceiling including preparation to distempering to match with existing work complete all as specified and directed

M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement mortar 1:4 finished even & smooth without extra cement complete all as specified and as directed. Note for item No 74 &75 :Quoted rates deemed to includude to carry out work at height up to 8m including provision of scafolding and safety arrangements.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for Preparation of old distempered / decorated surfaces of walls by Washing, rubbing down and stopping of distempered and painted surfaces and applying Two coat of Distemper oil emulsion complete as specified and directed.

M&L for Preparation of old distempered / decorated surfaces of ceiling Washing, rubbing down and stopping of distempered and painted surfaces and applying Two coat of Distemper oil emulsion complete as specified and as directed.

S&F in repair aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm) and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket beading and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and as directed.

S&F powder coated anodised Aluminium ventilator with fixed aluminium frame of size 60mmx40mmx1.2mm fixed in horizontal / vertical position with aluminium vertical members and half portion to be provided with aluminum heavy duty adjustable loovers and 4mm thick pinhead glass and remaining portion to be louvered using 4mm thick pinhead glass and louvered portion covered with stainless wire cloth 0.45mm dia of wire and average width of aperture 1.40mm incl Aluminium grill (decogrill Design no 20) and F/h type frame, rubber neoprene packing, anodised aluminium snap beading, screws, complete all as specified and as shown on drawing Note : Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium beading grill loovers etc

S&F sheet glass 3 mm thick ordinary quality(sheet glass is ground or obscured or frosted, on one side) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed.

S&F prelaminated medium density fibre board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F Prelaminated medium density fibre board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F 18 mm thick, BWR Plywood fixed with screws to timber frame-work complete all as specified and as directed.

M & L Second class hard wood (hollock) plain fillets of Sectional area not exceeding 3 Sq. cm, square, rectangular or triangular in section, wrought, secured with head less nails or brads, complete all as specified

S & F Continuous (piano) hinges, stainless steel, width of flaps (when open) is 30 mm bright finish or electrogalvanised

S& F for magnetic catcher of plastic body with striking plate etc and fixed complete

S& F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished

S&F 75 mm in size aluminium handles cast type anodized complete all as specified & directed.

S&F Hasp and staple, safety type 100 mm, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge

S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters of any description (W/out taking off shutters from the frames) and removal from site complete all as specified and directed Engineer-in-Charge

Taking down shutter of any description n exc 1.00 sqm each and removal from site complete all as specified and as directed.

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site complete all as specified and as directed.

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and Refixing of shutters in same opening after resecuring or easing & adjusting, complete all as specified and as directed.

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates,Fe-290 (Gde E 165) etc as door frame, steel gate,sink, hand wash basin and cooler stand etc complete all as specified and directed Engineer-in-Charge

S&F 35 mm thick second class hardwood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fitted to chowkats complete all as specified and as directed.

S&F 2nd class HW 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed Engineer-in-Charge

S&F 100 mm size Butt hinges, medium weight stainless steel complete all as specified & directed.

S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.

S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed.

S & F 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and as directed.

S & F galvanised stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and as directed.

M&L in repair Curtain rod, mild steel, chromium plated with and incl fixing brackets , stops, rollers etc complete all as specified & directed.

M&L for preparing new surfaces of wood or wood based materials of any description not other wise described over 10 CM width or girth new or previously un treated wooden surfaces and applying one coat of pink primer and two coat of synthetic enamel paint complete all as specified & directed.

S&F in repair 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F in repair 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.

S&F in repair 125 mm in size aluminium handles cast type anodized complete all as specified & directed.

S & F in repair 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and as directed.

S & F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and as directed.

S&F in repair Hasp and staple, safety type 100 mm, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S & F in repair Continuous (piano) hinges, stainless steel, width of flaps (when open) is 30 mm bright finish or electrogalvanised

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed

M&L for Cement concrete 1:3:6 type C-2 as in foundations, filling and mass concrete complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165

M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide.

M&L for prepration of old painted steel surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint etc. all as specified and as directed by Engineer-In-Charge.

M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.

M&L for precast cement concrete Type B0 1:2:4 (12.5mm graded aggregate) louvres and jallies, 50mm thick (measured solid),set in cement mortar 1:4, including all mouldings etc in repair complete all as specified and as directed.

Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as specified and as directed.

S&F 500 ltrs capacity triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

S&F in repair 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F gun metal gate valves with iron wheel head 25mm complete all as specified and as directed.

S&F in repair 200mm, ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

Taking down carefully any type of point wiring (light / fan / socket or power) along with old conduit/ cassing capping complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors and making good disturbed surfaces to the existing surface complete.

Taking down carefully sub main wiring complete of any type (batten / surface conduit) complete and making good disturbed surfaces complete all as specified and directed.

Taking down Distribution boxes any type with all its related accessories as directed by Engineer-In-Charge.

M & L for point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including super deluxe casing caping (not less than 25 mm wide) with all its accessories like bends, tees, suitable module PVC boxes o etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire and plastic laminated PVC box with cover plate as specified and directed by Engr -in charge:

(a) One light / fan / exhaust fan point controlled by one, one way switch.

(b) One light point controlled by two, two way switch

(c) One 3 pin socket out let 5 Amps on same board with other switches.

(d) One 3 pin socket out let 5 Amps on the independent board.

(e) One bell point control by one push button on the same board with other switches or independent with cable 1.5 Sqmm size

Ditto- all as per item No 131 above but with 4.0 sqmm multistranded copper multistranded conductor FRLS cable with 4 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board as specified and as directed.

S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts complete all as specified and as directed.

S & F switch Piano 5 Amps, flush button type, SP, two way, 230 Volts complete all as specified and as directed.

S & F switch bell push 5 Amps, flush button type, SP, one way, 230 Volts complete all as specified and as directed.

S & F Switch socket combination multipurpose 5 pin 5 Amps, flush type 230 / 250 Volts complete all as specified and as directed.

S & F switch socket combination ,6 pin ,15 amps, flush type, multipurpose, 230 / 250 volts complete all as specified and as directed.

S & F bell Ding Dong type AC 230 Volts, complete all as specified and directed by Engr -in charge

M&L for Ceiling rose, 3 terminal polycarbonate body 6 Amps, 250 volts AC, including connecting complete all as specified and as directed.

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6.0 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including casing and caping complete with all accessories alongwith provn of 4.0 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc complete all as specified and as directed.

Supply and fix sheet metal enclosure MCB DB, single pole and neutral, 8 ways double door 240 volts having 200 Amps rated bus bar with balnking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connections complete all as specified and as directed.

Supply and fix sheet metal enclosure MCB DB, triple pole and neutral, 4 ways double door 415 volts having 200 Amps double door rated bus bar with blanking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connections complete all as specified and as directed.

Supply and fix MCB single pole 240 volts 6 to 32 Amps (to be fixed as per load requirement) 240V with 'C' curve complete as including all connection testing and commissioning complete all as specified and as directed.

Supply and fix MCB Single pole Neutral 240 volts 40- 63 Amps (to be fixed as per load requirement) 240V with 'C' curve complete as including all connections testing and commissioning complete all as specified and as directed.

Supply and fix MCB’s triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting testing and commissioning . Note for MCB DBs & MCBs :- (i) MCBs shall be of 10KA breaking capacity as per IS 8828 of 1996 with 'C' characteristics. (ii) MCBs & MCB DBs shall be of the same make. (iii) Wiring cables shall be connected to MCBs with suitable lugs of copper materials.

Taking down Ceilling fan/exhaust fan with cover plate , sealing cable end, dismantling blades and removing fan and blad for painting of ceiling fan/Exhaust fan complete with synthetic enamel paint black/ white by spraying including filling of cavities with filler, one coat after cleaning all rust and dust etc complete and refixing the same with 0.5 sqmm , flexible ,three core wire, copper conductor cable all as directed by Engineer-In-Charge. all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type, 230 V, including connecting complete all as specified and as directed.

Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S&F energy efficient LED tube light fitting with built in LED & integral LED driver 8 to 10 watt, channel housing & diffuser of length 600 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S&F energy efficient LED tube light fitting with built in LED & integral LED driver 5 watt, channel housing & diffuser of length with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

S & F plastic body exhaust fan size 200 mm sweep, single phase, 1200 RPM, ISI marked, including louvers , with connection from ceilling rose with 0.5 Sqmm flexible three core wire complete in walll/window including making hole in surface inserting NP3 coller of 200mm dia bore and making good to match with existing surface and as per direction of engineer in charge

S&F LED building security light fitting 35 Watt, system efficiency not less than 100 lumen / Watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, pipe, bracket on building,

M & L for sub main wiring with two single core PVC insulated and unsheathed cable 2.5 sqmm with multi stranded copper conductor , FRLS type cable drawn through and including PVC conduit complete with all accessories alongwith provn of 2.5 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire and connecting to tbe BD with proper size of lugs/thimbles etc comnplete all as specified and directed.

Material and labour for earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion including taking up/down old earthing.

S&F in repair storage tank of solar water heater of capacity 100 LPD and connecting with its inlet and outlet pipe of solar heating panel with required clamp etc complete all as specified and as directed by Engineer-in-Charge.

Nirmal Construction

SONU INFRATECH LTD

S t modi

JAMNAGAR ELECTRIC AND MACHINERY CO