Memo No. 4362 /NKDA/Engg/EE-I-44/2024- Procurement and installation of Conference Table (for 50-60 people) at the fourth floor Conference Room of NKDA Administrative Building

Amount

Supply, Installation and placement of Godrej Interio 28 seater Mingle Modular conference table from manufacturers certified with ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from NABCB accredited agency), BIFMA (LEVEL 2), Indoor Air Advantage Gold, Greenpro, Sedex, AIOTA, Green guard (by UL) , indoor air quality certified manufacturer. Work top :The Table will be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade. Conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management : A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA?A,etc). Assimillaton & conjunction of different sizes i.e 2 Seater(24 Nos) module:1350W x 600D x 740H ,Corner module(4 Nos) : 850W x 850D x 740H as per direction of Engineer In Charge, rate is inclusive materials, labour, installation, carriage, lifting & all other taxes complete.

Supply, Installation and placement of Godrej Interio La Sede High Back Chair from manufacturers certified with ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from NABCB accredited agency), BIFMA (LEVEL 2), Indoor Air Advantage Gold, Greenpro, Sedex, AIOTA, Green guard (by UL) , indoor air quality certified manufacturer. It is made up of injection moulded plastic outer & inner . Plastic inner is upholstered with pure leather and moulded high resilence polyurethane foam of density =45+/- 2 kg/m3 and hardness 16+-2 as per is:7888 for 25% compression . It consists of pu foam with insitu moulded ms- e.r.w . Round tube size 1.9+- 0.03cm x0.16+- 0.0128. It is upholstered with pure leather. The armrest is made of pu upholstered pure leather ar mounted on a drop lift adj. Type tubular armrest support made of dia 3.81+-0.3cm x 0.2+-0.01cm thk m.s.e.r.w. tube having chrome plated finish. The armrest hgt adj. Up to 6.5+- 0.5cm in 5 steps. The mechanism is designed with the following features:- • 360 deg revolving type. • front pivot for tilt with feet resting on ground ensuring more comfort. • tilt tension adjustment can be operated in seating position. • 5-position tilt limiter giving option of variable tilt angle to the chair. • saet/back tilting ratio of 1:2. • the mechanism housing is made up of hpdc alu. Black powder coated. It is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0+-0.5cm. It is connected to up/dw mechanism house in plastic t spine . It can be adjusted in the range of 7.42+- 0.5cm for the comfortable back support to suit indiviual need. It has an adjustable stroke of 10.0+-0.3cm. It has a high pressure die cast polished. Alu. Fitted with 2nos twin wheel castors . The pedestal pitch center dia is 65.0 +- 0.5cm pitch center dia. (75.0 +- 1.0cm with castors). 5 no twin wheel castors are injected moulded in plastic having 6.0 +- 0.1cm wheel dia and assembled to pedestal. It is a cantilever type and made of dia 2.54+-0.03cm x 0.2+-0.016cm thk s.s 202 tube . The back connected to frame through chrome plated high pressure die cast connector piece. Seat size :- 47.6cm (w) x 49.2cm (d). Over all dim:-76.1x76.1x114.0 - 131.5cm (wxdxh). Seat hgt:- 44.5 – 54.5cm (sh). High back size :- 47.5cm (w) x 77cm (h) as per direction of Engineer In Charge, rate is inclusive materials, labour, installation, carriage, lifting & all other taxes complete.

Supply, Installation and placement of Godrej Interio Aero Chair from manufacturers certified with ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from NABCB accredited agency), BIFMA (LEVEL 2), Indoor Air Advantage Gold, Greenpro, Sedex, AIOTA, Green guard (by UL) , indoor air quality certified manufacturer. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 + 0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The Back is made up of injection mou1ded glass filled nylon & upholstered using Mesh fabric with high tenacity yarn.“ SEAT SIZE(Standard Seat Depth) 47.0 cm. (W) x 49.5 cm. (D)* BACK SIZE : 45.0 cm. (w) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 for 25% compression.ARMRESTS : The adjustable armrest is designed with the following features :• Up-Down adjustment— 8 steps (8 0+0.Scm range)• Height adjustable armrest structure which is Powder Coated & fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 + 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.» Tilt tension adjustment.• 4-position locking with anti-shock feature. • Seat/back tilting ratio of 1:2.PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 + 0.3 cn°.Pedestal Assembly : the pedestal is injection moulded in black 30% glass filled nylon and fitted with 5 nos. twin wheel castors. H=The pedestal pitch center dia is 66.1+0.5 cm.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered with polyester fabric Neckrest is fixed to Back Assembly through Neckrestconnector Neckrest assembly has height adjustment of4.2 + 0.5 cm and rotation adjustment of overall76”+ 2” as per direction of Engineer In Charge, rate is inclusive materials, labour, installation, carriage, lifting & all other taxes complete,

SANKAR FURNITURE (BID ID -6558959)

KOLKATA INTERIORS PRIVATE LIMITED (BID ID -6552405)