Aurangabad Water Supply Scheme -Providing Non-rising spindle resilient seated glandless sluice valves and temper proof air valve without isolating sluice valves on 700 and 1219 mm dia main line from jaikwadi to MBR ( Part I )

Amount

Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non-rising spindle resilient seated glandless sluice valves with handwheel & without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass, shaft of stainless steel1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. Including all taxes and transportation charges etc.complete. 150 mm dia

Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non-rising spindle resilient seated glandless sluice valves with handwheel & without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass, shaft of stainless steel1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. Including all taxes and transportation charges etc.complete. 200 mm dia

Providing and supplying at site ductile iron / Spheroidal Graphite (S.G.) iron single / Double chamber tamper proof air valve without isolating sluice valve.Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. Including all taxes and transportation charges etc.complete 150 mm dia

Providing and supplying at site ductile iron / Spheroidal Graphite (S.G.) iron single / Double chamber tamper proof air valve without isolating sluice valve.Valves in accordance with BSEN 1074-4 of PN 10/16 rated, with body and bonnet of ductile iron confirming to EN 1563/IS 1865 Gr. 500/7 or Gr.400/15 floats, float guide, seat ring of stainless steel 1.4436/1.4306, seat ring gasket of WRAS approved EPDM rubber (suitable for drinking water), internal fasteners of stainless steel A2. Body & Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677-2 & GSK guidelines with a coating thickness of min. 250 microns. Flange connections as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14845. Including all taxes and transportation charges etc.complete 200 mm dia

Noor Construction