Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC VILLAGE P O AMARPUR TEHSIL GHUMARWIN DISTT BILASPUR H P | BILASPUR | HIMACHAL PRADESH | 174001 | L1 | Accepted-AOC aCCEPT | |
| 2 | L2₹41.7 L+₹1.0 L (2.57%)Accepted-AOC R O VILL P O NAIN TEHSIL BARSAR DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | L2 | Accepted-AOC Accept | |
| 3 | Not Admitted-Fee/PreQual/Technical VILL PO BANURI TEHSIL PALAMPUR DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 175013 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹34.6 L
EMD Value
₹59,500
Closing Date
16 May 2023, 5:00 pmClosed
Executive Engineer
HPPWD Division Dharampur
C.o of two rooms
2023_PWD_72957_1
. PWD.DPD.Tender-608-10 dt. 18.04.2023
Open Tender
Civil Works - Buildings
Item Rate
270 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,500
Yes
₹59,500
16 Jun 2023
8 May 2023
17 May 2023
8 May 2023
16 May 2023
8 May 2023
Amount
Excavation in foundation, trenches etcetera in all classification of soil such as pick work, jumper work, blasting work soft rock and hard rock including chiselling wedging and any other mixed variety in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in fifteen centimeters layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus un-serviceable excavated earth within all leads and lifts as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts, disposed materials to be neatly dressed and levelled including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
In foundation,footings bases of columns etcetera and mass concrete.
In flat surfaces such as soffits of suspended floors, roofs, landing and the like floor upto any thickness upto all floor levels.
In columns, pillars posts and struts square rectangular or polygonal in plan.
In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in nall depth /height not exceeding 1 (one) metre depths upto all floor levels
Stair Case with sloping or stepped soffits excluding landing upto all floor level.
In edges of slabs and breaks in floors and walls in any floors width/ height upto all floor level.
Providing and laying mechanically mixed cement concrete 1:3:6 (One cement: three coarse sand: six graded/crushed stone aggregate 40mm (Twenty millimetre) nominal size as per specification and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying mechanically mixed cement concrete 1:6:12 (One cement:six coarse sand : twelve graded crushed stone aggregate 40( forty )millimetre nominal size and curing complete but excluding cost of form work in foundation and plinth including all heights/depths including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents not less then 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, all work up to plinth level excluding the cost of centering, shuttering, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying Reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents not less then 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, for attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level to all floor levels excluding cost of centring shuttering finishing including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying HYSD bars Fe 500D made of SAIL,TISCO/JINDAL PANTHER for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding including the cost of binding bars all complete upto all level including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( seven point five) in superstructure above plinth level upto all floor level in all shapes and size in cement mortar 1:6 (one cement : six coarse sand) curing complete including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Stone filling /Soling under floors tightly hand packed upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and MORD technical specifications 2014 as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and fixing angle iron door window, clerestory window frame made of San Harvic, Steelman Industries, PD Industries, Metal Windows, Chandni Industries, Ganpati Udyog (Rajpura) manufactured from steel iron section of 40mm x40mm x 6 mm (Forty milimetres into forty milimetres into six millimeter) including hinges jamb lock, jamb beed and or required angle thrashold of mild steel angle 50x25mm (fifty milimetres into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two Decimal five millimeter) thick with provision for locking arrangement and shock as absorber specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and fixing double rebate galvanized mild steel prefabricated pipe of required shape and size frames for doors, windows and clerestory windows made of TATA/SAIL/APOLLO Chaukhat) weight not less then 5.00 Kg ( five killograme) per running metre as per the direction of Engineer in Charge and approved drawing including hinges, lock jamb beed and if required angle thrashold of mild steel angles welded rigidly fixed by mechanical means lugs with spilt end tail to each jamb including steel but hinges 2.5 mm ( two point five millimetre) thick with provision for locking arrangement and shock absorder as specified and applying a coat of steel primer after pre-treatment of the surface including entire carriage of materials upto all leads and lifts. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and fixing 35mm ( Thirty five ) millimetres thick ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type ,core of block board construction with frame Ist class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory window including black enamelled iron butt hinges with necessary screws.40mm ( Forty milimetres) thick Ist class Deodar wood including fixing complete and carriage of materials within all leads and lifts and other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing Mild Steel grills of required pattern on wooden/steel frames of windows etcetera with mild steel flats square or round bars with round headed bolts and nuts or by screws/welding in plain grill as per directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
Providing and fixing 300×16mm (Three hundred into sixteen millimetre) nominal size anodized aluminium sliding door bolts anodized / powder coated colour or shade with bolts and nuts etcetera complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and fixing aluminium tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
250x10mm (Two hundred fifty into ten millimetres)
150x10mm (one hundred fifty into ten millimetres)
Providing and fixing aluminium handles anodized/ powder coated transparent or dyed to required colour and shade with necessary screws etcetere complete. upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
125mm (one hundred twenty five millimetres)
100 mm (one hundred millimetres)
Providing and laying full body antiskid vitrified floor tiles of size 600x600 (Six hundred into six hundred millimeters) with water absorption less than 0.08% and conforming to IS: 15622, of approved make Somany/Kajaria/Nitco /Orient RAK, Johnson & Johnson) in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three killogramme per square meters) including grouting the joints with white cement and matching pigments etc., complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying full body antiskid digital vitrified tiles of Kajaria, Nitco, Somany, Orient, RAK, Jonshan & Jonshan inskirting 300x300x8 mm. (three hundred into three hundred into eight milimeters) size in skirting risers of steps and dados on 12 mm thick cement mortar 1:3 ( one cement : three coarsesand) finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying 25mm (Twenty five millimetres) thick kota stone single piece not less than 120 ( one hundred twenty) centimetre flooring mirror polished finshed of uniform colour laid on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 ( One cement : four coarse sand) laid over and joints with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete in all floor level in all heights upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and laying Kota stone slab 25mm (Twenty five millimetres) thick in single piece not less than 120 ( one hundred twenty) centimetre for risers of steps skirting dado and pillars laid on 12mm (Twelve millimetres) ( average ) thick in cement mortar 1:3 (One cement : three coarse sand) and jointed with grey cement slurry mixed with pigment to match of the shade of the slab including rubbing, polishing and mirror finish complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( One cement :three coarse sand) upto all floor level upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights and curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Applying Birla white wall care putty 1 mm ( one millimetre) thick over plastered surface after thoroughly brushing the surface free from mortar droops, dust, loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Distempering two coats with oil bound washable distemper of approved brand and manufacture of required shade over andincluding of priming coat with alkli resistance primer of approaved brand and manufacture of paints ASIAN/NEROLAC after thoroughly brushing the surface free from mortor dropping and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level in all heights upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Finishing wall with weather proof exterior grade emulsion of approved design (Apex Ultima, Asian Paints on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine liters per ten square metre)over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight liters per ten square metre) of approved brand and manufacture ASIAN PAINTS/NEROLAC make including cleaning the surface of all dirt dust and other forign metter complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Applying one or more coats of wood primer with ready mixed pink or Grey primer of ICI (Dulux Gloss), Nerolac, Berger (Luxol High Gloss), Asian Paints (Premium Apcolite Gloss), Shalimar make on new wood surgace after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm(zero point nine liters per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm(zero point seven five liters per ten square metre) of approved brand and manufacture of Asian Paints /Nerolac make including cleaning of all dirt, dust and other foreign matter sand papering and stopping complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Making plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) over 75 mm(seventy five millimetres) thick bed of dry brick bllast 40 mm(forty millimetres) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and derssing and finishing the top smooth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.
Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.
Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely)including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt. .
Steel work welded in built up sections made of TATA/SAIL/JSW/APPOLLO,in grating, framed guard bars ladders, railing brackets and similar works , including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.
PARVEEN KUMAR
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .