CA NO CWE/AMB/SOUTH-05 OF 2025-26 SPECIAL REPAIR FOR BLDG NO P-39 OF MH AND EXISTING BOUNDARY WALL OF CPI ASC UNDER GE (SOUTH) AMBALA CANTT

Amount

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Supply & fixing Steel water tubing of 15 mm bore, medium grade galvanized, ISI marked with all fittings laids in floor with wall and on ceiling, complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Supply & fixing Steel water tubing of 20 mm bore, medium grade galvanized, ISI marked with all fittings laids in floor with wall , complete all as specified and directed.

Material & Labour for PVC water storage tank 1000 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified.

S & F Chromium plated (CP) grating round 100/125 mm size as in repairs all as directed.

Supply & fixed (in repair) 15mm, chromium plated, angle cock with wall flange cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified.

Supply & fixed ( in repair) CP bib cock screwed down high pressure, long body/Nose, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified.

S&F Single lever CP basin mixer screwed down for iron pipe and fixed complete all as specified and as directed.

S&F CP Wall Mixer 2-in-1 with Flange screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs Chromium plated over head shower roses 125 size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing toilet Paper Holder with Flap Recessed Type (Stainless Steel) complete all as specified and directed.

Supply and fixing in repair Stainless steel towel Rail of size 600 mm with lower hanger fixed to wall complete all as specified and directed

supply and fixing soap despenser with glass bottle fixed with and including chromium plated brass screws complete all as specified.

Supply and fixing Chromium plated hand shower (Health Faucet) with 8mm dia, 1metre long flexible tube & wall hook complete all as specified and directed

Supply & fixing in repair PVC connection 450 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe all as specified.

Supply and fixing in repair floor mounted coupled WC ,bowl for coupled WC with US soft close slim seat cover, Hinges, cistern fixed accessories and accessories set, size 695 x 385 x 770mm P trap size 180mm complete all as specified and directed.

Supply & Fixing bottle trap with fully casted body (with internal partition) 32mm with 190mm & 125mm long connecting pipes & wall flange complete all as specified and directed.

S&F in repair vitreous china, white coloured, counter top wash hand basin, oval type, including cutting for and pinning , waste pipe complete all as directed

Demolition and breaking up drain pipes100/75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all asspecified.

S&F PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall / floors or in gtrenches etc complete as specified and directed by Engr in charge.

S&F PVC (SWR) bends 110 mm bore complete as specified and directed.

S & F PVC (SWR) vent cowl of 75mm dia complete as specified and directed by Engr in charge.

S & F PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door all as specified .

M & L PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outter diameter outlet of 75mm as in repairs complete as specified and directed by Engr in charge.

Demolition of brick work built in cement mortar including all quoins pillars etc complete all as specified .

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), with necessary scaffolding etc complete all as specified and directed.

Dismantling wall lining,ceiling board or insulation boards, any thickness, including cover fillets all as directed

S & F of 5-8 mm thick colour PVC panel, hollow profile PVC wall paneling/ lining inclusive of fixing arrangement including screws, side beading, angle, U- channel fixing on wall as per specification and directed .

Taking down cement plaster from brick or concrete surfaces including raking out joints,hacking keys, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for rough cast plastering including 15 mm thick rendering in CM 1:3 complete as specified in SSR Part I, clause 14.22. (Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered.

M&L for 15 mm thick rendering on brick or concrete surfaces in CM 1:4 with , finishing the surface even and smooth without using extra cement. (Note: to use only Yamuna sand )

M&L for rendering 10mm thick in CM (1:3) on ceiling surfces finished even and smooth without using extra cement.complete all as specified and directed.

M&L for15 mm thick cement plaster in CM (1:6) on fair/unfair face of brick work or concrete surface finished even & smooth without using extra cement complete all as specified and directed.

Material & Labour for two coats of oil bound distemper over a coat of primer incl preparation of new plastered surfaces of walls and applying 3mm thick (Minimum) white cement based wall care putty in two coats, finished even and smoot complete all as specified.

Material and labour for two coats of exterior emulsion paint, on new surface on walls, chajjas etc over a coat of primer of same manufacturers of as emulsion including necessary scaffoldings upto 12 mtr or more height, complete all as specified and directed.

M&L for two coats of oil bound distemper incl preparation of new surfaces of ceiling complete all as specified and directed.

M & L for one coat of synthetic enamel paint incl prepering old painted steel surfaces of any description not otherwise described over 10 cm width or girth complete all as speciied and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete all as specified and directed.

M&L for coloured glazed ceramic tiles (300x 450x 7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 complete all as specified and as directed.

Material & Labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified.

Material & Labour for Non - skid coloured Ceramic tiles (400x400mm) 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified.

M&L 20 mm thick black granite (of any type) (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking, set in 10MM thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

Demolition of cement concrete(un-reinforced) of any descriptions, in ground floors not exc 150mm thick, above or below ground level complete all as specified and directed.

Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applying of the following specifications complete all as specified. (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material, dirt, dust etc. (ii) Applying cement slurry mixed with acrylic based polymer moodified cementitous composite compound coating. (iii) First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. (iv) Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126 Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. (v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. Note- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. complete all as directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded aggregate as in foundation/ sub base of floor complete all as specified and as directedby Engr in Charge..

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course complete all as specified and as directed.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongry hold fasts etc., complete all as specified.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as spd.

Supply and fixing of providing solid WPC door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed . The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity.

Supply and fixing of 30 mm thick moulded WPC factory made 100% solid door (confirming as per IS : 4020) made from 100% lead free single extruded with 2,4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kh/cum.Manufactured by an ISO: 9001-2015 certified company.The door should be water proof,termite rpoof,fire retardent and having screw holding capacity complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised .complete as specified and directed .

S&F 200mm long aluminium anodised barrel tower bolts of extruded section .complete as specified and directed .

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100 mm long complete all as specified and directed

S&F powder coated aluminum frame (minimum thickness of powder coating 50 micron) as in frame of door/ window / partitions , etc with one or more rebates including hinges, handles, jointing cleat for fixing etc. complete all as specified.

S & F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.with powder coating of any colour (Thickness or powder coating not less than 50 micron). complete all as spd and directed

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) .with powder coating of any colour (Thickness or powder coating notless than 50 micron). complete all as specified and directed

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 5.5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below,including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed by Engr-in-charge. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make

Supply and fixing 5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame or door with glazing clips, etc., complete all as specified and as directed

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.complete as specified and directed

S&F in repair Aluminium body door closer Aluminium (extruded section) for aluminium door shutter hydraulically regulated, suitable for door shutters up to 1000mm in width and of weight not more than 61 to 80 kg and fixed. complete as specified and directed.

Factory made mild steel door shutter with frame, fabricated from of 1 mm thick MS sheet including provision of steel handle & locking arrangement by providing 04 leaver lock with duplicate keys (of make Godrej, Link or Harrison) & handle etc, (all as per Godrej pattern & detail shown on Drawing No. FD-1032 sheet 1/1 dtd 25.9.93) including spray painting over a coat of red oxide primer and fixed the same on existing cupboard nitch with cement & sand mortar, complete.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling existing railing complete all as specified and directed

M & L for cleaning the roots top surfaces, brick tiles or concrete surfaces by picking, vegitation roots, sweeping clean and washing down with water to remove dust etc and filling & damaged joints of brick tiles in CM 1:4 complete all as specified.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3

M&L 40mm thick average thickness PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof padding, levelling course and finishing top surfaces even and smooth using extra cement to receive APP membrane , complete all as specified and directed

Material and labour for providing 3 mm thick APP(Atactic polypropylene polymer) modified prefabricated five layer, weight not less than 3.6 Kg/Sqm water proofing membrane, black finished, reinforced with Non-woven polyster matt make as approved over roof consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25º C temperature and viscocity 70-160 Cps. over the primer coat of industrial bitumen 85/25 @1.2 ltr /kg, the layer membrane shall be using butane torch and sealing all joints etc. after preparing the surface complete as per standard practice as per manufactuter's instructions all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under : - (i) Joint strength in longitudinal and transverse direction at 25º C as 650/450 N/5 Cms. (ii) Tear strength in longitudinal and transverse direction as 300/250N/5 Cms. Softening point of membrane not less than 150º C cold flexiblility up to 20º when tested in accordance with ASTM (D-5147). (iii) The laying of membrane shall be carried out through the manufacturer or their authorized applicator only with Gurantee of 10 years by contractor.

M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges type B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed

Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed

M&L for 40 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in levelling course complete all as specified and as directed.

Material and labour for 100 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

S&F Chequered cement concrete tiles 20cm x 20cm x 25mm thick set ,jointed and pointed in neat cement slurry laid over and including 20 mm thick average thickness cement mortar 1:4 bed, complete all as specified and directed.

Material & labour hard core of broken stone gauge not exceeding 63mm deposited and leveled in layer not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand cushion of 50 mm thick(including) complete all as specified and directed

Material and labour for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in plinth protection finished surfaces even and smooth without using extra cement and joint will be filled by mix of 85/25 bitumin and sand complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

All as per item No 28 above but except bricks complete all as specified and directed.

S&F mild steel framed work conforming to Fe-290 (Gde E-165), as in framing for clading ,angle or other section with gusset lates,rails, braces, etc. complete drilled for fixing steel sheeting etc.complete all as spd & directed.

S&Fgalvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed ( each line wire to be measured.

M&L for RCC M-25 Design mix (20mm graded aggregates) mechanicallly crushed stone aggregate as in Columns, pillars, piers,posts and struts complete all as specified.

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M & L applying two coats of cement based paint on new plaster wall surfaces including preparation of surfaces complete all as specified and directed.

Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc.

Material and labour for taking down ceiling fan of any size/ sweep after disconnecting the wire from existing ceiling rose dismentaling of blades and deposited to store for repair all as specified and directed.

Material and labour for taking down Exhaust fan of any size/ sweep after disconnecting the wire from existing ceiling rose deposited to store for repair all as specified and directed.

Taking down old unserviceable single phase Electric Meter and deposited to MES Store Yard complete all as specified and directed.

Taking down old Water Heater (Geyser) any type/Size/Capacity with all accessories after removing of all incoming/outgoing pipe line connection and deposited to MES Store Yard for repair complete all as specified and directed.

Taking down old and unserviceable submain wiring any size /type including earth wire complete with batten/conduit etc complete all as specified and directed.

Taking down old unserviceable VPTN MCCB DB//MCB SPN 8way any of size/capacity complete all as specified and directed.

Taking down old unserviceable MCB SPN/MCB SP of any size/capacity complete all as specified and directed.

Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flush boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point/exhaust point controlled by one switch complete all as specified and as directed. NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately. 2. All chases will be cut by chase cutter only.

Description all as per item No 93.00 here in before but for socket out let point 5 Amps on same board

Description all as per item No 93.00 here in before but for socket out let point 5 Amps on independent board

Description all as per item No 93.00 here in before but for one bell point controlled by one bell push.

All as per srl item No 93.00 above but point wiring for one socket out let 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor

Supply and fix in repair modular switch 5 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed.

Supply and fix in repair modular switch 15 Amps, flush type, single pole, one way, 230 volt , AC supply, ISI Marked, complete all as specified and directed.

Supply and fix in repair modular socket outlet 3 pin 5 amps, 230 volts flush type ,ISI Marked, complete all as specified and directed.

Supply and fix in repair modular socket outlet 16 amps, 230 volts flush type ,ISI Marked, complete all as specified and directed.

Supply and fix in repair modular fan regulator step type one module/2 modules, 120W, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified.

Supply and fix in repair modular switches , bell push, 6 Amps one module , 230V,50Hzs, supply complete all as specified and directed

Supply and fix in repair call bell ding dang /musical type single phase complete all as directed

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.

Supply and fixing of LED light fitting 1x20W , 220V,not less than 100 lumen per watt, AC batten aluminium housing type with driver , holder including 20W LED tube light for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specifid and directed. Note: LED cool white/warm white must get approved from engineer-in-charge.

Supply and fix batten type with surface mounted LED tube light fitting with high efficient diffuser mirror light, polycarbonate housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.Note: LED cool white/warm white must get approved from engineer-in-charge.

Supply and fix bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description complete all as specified and directed.

Supply and fix bracket for security light made up of 25/40mm dia suitable for security light, 0.9 metre long MS pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed.

Supply and fix LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed.

Disconnecting and taking down old existing wall fitting of any description and in any position and Supply and fixing surface mounting type LED round type Decorative ,wall mouting , STYLO bowl type/metal base with glass with 7 Watt LED Warm white B22 Lamp including connecting up with three core 1.5 sqmm flexible copper conductor cable complete all as specified and directed.

Supply and fixing in repair sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 32 Amps, 240 volts complete all as specified and directed.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE:- 3 run of 4.0 sqmm cable with concealed conductor shall be measured as 1 unit.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 6 sqmm drawn in and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6 sqmm, green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE:-3 run of 6.0 sqmm cable with concealed conduct shall be measured as 1 unit.

Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type ,160AMPS ,25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed.

Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets complete all as specified and directed.

Supply and fixing MCB SP single pole, 240 volts, 50 Hz, breaking capacity , 6 to 32 Amps, ISI marked, complete all as specified.

Supply and fixing SPN 40 -63 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA complete all as specified and directed.

Supply and fixing MCB SP single pole, 240 volts, 50 Hz, breaking capacity , 40-63Amps, ISI marked, complete all as specified.

Taking out old unserviceable earthing and material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised wire 4mm dia (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and as directed.. Note : The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

Supply and fix in repair MCCB four pole , 440V breaking capacity 25 KA , 200A including making necessary provision for fixing in existing panel , additional busbar line complete all as specified.

Supply and fixing ceiling fans, AC, single phase, 230V, 50Hzs , copper wounded of 1200mm sweep with BLDC technology , max power input upto 35W , copperwire induction motor with 5 star BEE ratings complete alongwith with canopy cover , down rod `U' clamp, 3 core PVC flexiable cable 1sqmm for making connection of fan and hanging the fan in clamp, connecting with exisiting electrical connection all as specified and directed by Engineer-in-Charge.

Supply and fixing Exhaust fan, steel body , AC single phase, 230V of size 300mm ,with four blades, frame and louvers complete all as specified and directed .Note: The rate of MS louvers and making hole in wall if required is deemed to be included in unit rate quoted.

Supply, installation and testing of storage type heater (Geyser) of 25 Litres Capacity, vertical type to sustain high pressure upto 8 bars with fixing bolts / fastener, necessary PCC/cement work and making good the disturbed surfaces to match with existing surface giving electric and water connection, with temperature resistent SS braided pipe suitable to sustaine pressure up to 8 bar not less than 60 Cm long suitable for incoming / out going water connections and testing after installation to entire satisfaction of the Engineer-in-Charge complete with following specifications : - (a) 5 Star rated (Vertical type) Necessary BEE cerificate from OEM shall be produced by the contractor at the time of sample approval. (b) Metal Body, (c) Glass line coated tank (Ferro-glass technology) / Polymer coated. (d) Incoloy glass coated heating element. (e) Adjustable thermostat. (f) Temperature indicator dial/digital type. (g) Multiple Heating Option. (h) Multiple Functional Safety Valve. (j) Thermal Cutout Capillary Type. (k) In built protection for overheating/over pressure. NOTE : - Warranty certificate to be produced by the contractor from OEM for the following components before processing the bill. (a) For product - 02 Years Warrenty (b) For metal tank 07 years Warrenty.

M&L for re-fixing single phase electric meter any type and any capacity with all accessories with making all connection complete all as specified and directed

Supply and fixing for telephone/TV socket 2/3 pin, 5 Amps , 230V complete all as specified and directed

Supply and fixing of rigid non metallic PVC conduit, 25mm dia , including of boxes(junction/Terminal) but including of all tees, bends, socket, bends, elbow , reducer , bell mouth , tube ends and fixing accessories such couplers , lock nuts, saddles, pipe hooks etc for passing TV/Telephone cable concealed in wall/ceiling/floors etc complete all as specfied and directed

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty Under ground XLPE cable with PVC insulated aluminium, stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 25 sq. mm 4 core nominal cross sectional Area complete all as directed

Supply and fixing cable protection GI Tubes of bore 50 mm ,'light grade' ,with all fittings and fixed complete to walls and ceilings or laid in floors,complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtrs wide and not exc. 1.5 Mtr deep and getting out soft/loose soil complete all as specified and as directed by Engineer -in-Charge

Returning, filling in including spreading levelling , watering and well ramming in layers not exc 25cm thick after the cable have been laid testing complete all as specified and directed by Engineer -in-Charge

Removal of excavated surplus soil to a distance not exc 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed.

Material and Labour for unwashed dry sand cushioning for cable protection , filling in treches complete all as specified and as directed..

M&L for Protection to cable with one layer of new bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks complete all as specified and directed.

Note:- Amount of credit of Rs. 99,212.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 22 & 23 of tender documents in pdf form which will be deducted offline while acceptance of tender.

ANIL CONSTRUCTION CO. (BID ID -3370099)

Parveen Kumar (BID ID -3376040)