AE/LSGD/KVPDY/19-20 Pallikkara Water Supply Scheme 2HP Borewell Electrification ward-7 in Vengoor GP

Amount

Supply, conveyance, installation, testing and commissioning of 2 HP Borewell Submersible Motor pump set working voltage 1 phase, 240V, 50Hz , Ac Supply ,with head range 40 -120 Mtr , maximum available head 93 mtr , having discharge of 1.25 Lps against 66 Mtr head , delivery size 32mm ( Kirlosker make Model KU4 - 0718 S or equivalent make ) for 100 mm Borewell .

supply, threading, laying and jointing 32 mm 12 kg HD pipe with all accessories for delivey pipe

32mm or nearest size CI flange set

32mm or nearest size Hose Collar

32mm or nearest size PVC Adopter

32mm Full way Valve (Heavy PVC )

Supply and providing 12mm nylon rope

cable tie

Supply and drawing PVC insulated & sheathed 650/1100 V grade 2.5 sq.mm 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.

Supply and fixing 25 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of 4.00 sq mm 2run.

Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in hard soil)

Supply and providing300 x 300 x 6 mm cast iron gully trap with covering at the top of the inspection chamber of earth pit as required

Supply and providing test joint for the earthing system using 2 x 25 x 3 mm GI strip including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

Supply and providing earth lead from the test joint to the earth electrode using 25 x 3 mm GI strip including cutting, drilling necessary holes and fixing firmly with plate test joint etc as required.

Supply and laying 3.15mm copper conductor (No.10 SWG) laid 0.60 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil)

Supply and drawing 3.15 mm copper conductor (10 SWG) along with wiring/ cables and giving connection as required.

supply of superior quality copper earth socket for 3.15 mm (10 SWG) earth conductor including crimping etc. as required.

Supply and providing 25 x 6mm brass bolt & nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

Supplying , threading , laying and jointing of 15 mm dia 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads

Fabrication of fully partitioned, dust and vermin proof enclosure for out door assembly as per form 4 of IS 8623 (with latest amendments) using 2.0 mm CRCA sheet as per approved design and requirement, hinged frontdoor, earthing the doors using 4 sq mm braided copper conductor, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments should be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.

Supply and providing 'U' section rubber beeding suitable for 1.60/ 2.00 mm sheet

S & F 32 A, 415 V, 50 Hz, AC 23 A duty, DP SDF for DIN fuse

S & P HRC 2 -80A, DIN type fuse link of size 000

S&F Standard Starter Control Panel suitable for 2 HP 1 Phase Open well submercible Pump Motor complete with DOL starter, start/run capacitors, over load protection , Analogue type voltmeter, ammeter , LED indication for Start/ Run and Phase indication lamp (Kirlosker/Havells/L&T Make )

40 A, 2 pole, 100 mA RCCB

1KVAr, 1 phase, 240 V, delta connected Metalised Poly Propylene Capacitor suitable for direct connection to motors.

Aluminium anodised Danger Notice Board of size 150 x 100 mm. with inscriptions ( both in English and Malayalam) and conventional Skull and Bone in Red colour.

Supply and clamping 25x3mm copper strip as earth bus

Fabrication, supply, conveyance and installation of angle iron frame work for Floor/wall mounting panel board using suitable size angle iron cut and welded to shape including painting with two coats of synthetic enamel paint over a coat of zinc chromate primer, bolting the frame to the panel using required bolt and nuts, fixing the whole to the wall, making good the damages etc. as required.

Carrying out control wiring for panel with normal meters and indication lamps alone with 650/1100 V grade, 2.5sqmm PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required.

S & fixing Syntex Meter Board (GSMB 3525 ) for fixing KSEB meters, fuse units, CT etc as required, vision panel including fixing it on wall, making good the damages etc. .

Supply and fixing the following accessories in the existing meter board and giving connections etc.63A, 415 V Backelite fuse fitting

35-63 A, bolted offset tag type fuse link of size A1L

63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

S & F iron hook grouted on wall for binding GI wire

Supply and clamping the following sizes of "B" class GI pipe on wall with all required accessories & clamps etc., including cutting and making good the walls, painting the exposed portions etc., as Service Pipe32 mm dia

Supply and clamping the following sizes of "B" class GI pipe on wall with all required accessories & clamps etc., including cutting and making good the walls, painting the exposed portions etc., as Service Pipe32 mm dia

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core copper conductor cable 650V grade,including providing Switch Board main and continuous earthing with No. 14 SWG copper, required qty of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white or off white) etc. up to and including 6 A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. Single control light point with 6A, 3 plate ceiling rose

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core copper conductor cable 650V grade,including providing Switch Board main and continuous earthing with No. 14 SWG copper, required qty of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white or off white) etc. up to and including 6 A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. Single control light point with 6A, 3 plate ceiling rose

- Do- Independent plug

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting made from 0.5mmCRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.20W LED light fittings

Supply and fixing High pressure die cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, Polycarbonate cover 9 W LED fixture to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required. Philips make Endura LED Bulk head fitting WT 202W LED 6S NW PSU S2PC or equivalent make

KSEB Service connection charges including application fee , CD ,support post etc. actual amount paid on production of orginal invoice or challan