Tender for Erection & Maintanance of HT ,LT,TC and UNDER GROUND and other works in Ambach Zone in all scheme Under Vapi Rural Sdn Under Vapi Rural Division.

(A) CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Sr No. Item Code Description UNIT Rate

9926000001 HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICES, NO.

1 DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS AND NUMBERING

COMPLETE WITH COST PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

9926000002 ERECTION OF PSC POLES OF 8METER 200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING NO.

2 OFCROSS ARMS, TOP FITTING CLAMPS ANTICLIMBING DEVICES, INSULATORS ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

9926000003 ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, NO.

FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC.

3 COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON THE POLE AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

9926000004 ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/NG LINE FOR 0.400/11/22KV NO.

OVERHEAD LINES I.E INCLUDING EXCAVATION OF PIT & REFILLING OF EARTH, FIXING CROSS ARMS, TOP FITTING

4 CLAMPS,ANTICLIMBING DEVICES DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL

POLES, FABRICATED MATERIALS USED ON THE POLES ANDNUMBERING WITH COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

9926000005 ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS & NO.

REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING DEVICES

5 DANGERBOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES

AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SETS AND EARTHING. (WITHOUT AB SWITCH)

9926000006 ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.STEEL POLE INCLUDING EXCAVATION OF PITS NO.

&REFILLING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS,ANTI-CLIMBING DEVICES DANGER

6 BOARDS, INSULATORS ETC.COMPLETE &PAINTING POLES,FABRICATED MATERIAL SUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY

SET ANDEARTHING. (WITHOUT AB SWITCH)

9926000007 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, HGFUSES OF 8 MTRS 200 KG PSC NO.

POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,FIXING OF CHANNELS SUPPORTING ANGLES,

7 CLAMPS,ANTI-CLIMBING DEVICES, DANGER BOARDS, INSULATORS,DO FUSES ETC. COMPLETE AND PAINTING

OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT EXCLUDING OF ERECTION OF GUY SET AND EARTHING. (WITH

9926000008 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG FUSES, 9 TO 11 METERS STEEL NO.

POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OF CHANNEL, SUPPORTING ANGLES,

8 CLAMPS, ANTICLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC. COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES ANDNUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUTEXCLUDING ERECTION OF GUY SET AND EARTHING. (WITH AB SWITCH)

9926000009 ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OFAB SWITCH,FUSES, TRANSFORMERS, NO.

LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF 8 METERS 200 KG PSC POLES INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF

9 CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER

BOARDS,CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING.

9926000010 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH,HG FUSES TRANSFORMERS, NO.

LIGHTENING ARRESTORS, DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES INCLUDINGEXCAVATION OF

PITS & REFILLING OF EARTH CARTING OF TRANSFORMERS FROM STORE TO SITE, FIXINGOF CHANNELS

10 SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY

SETS AND EARTHING.

9926000011 ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH AS PER STANDARD NO.

SPECIFICATION WITH STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE, EYEBOLT, GUY INSULATOR,

11 CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING CONCRETING.

9926000012 CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND METAL (1:2:4)AND WATER ETC. AS PER CMT

12 STANDARD SPECIFICATION.

9926000013 ERECTION OF COIL TYPE EARTHING INCLUDING COST OF COAL,SALT ETC. BUT WITHOUT COST OF Gl WIRE AS NO.

13 PER STANDARD SPECIFICATION(20kg salt+20kg coal)

9926000014 ERECTION OF Gl PIPE/CI PLATE TYPE EARTHING INCLUDINGCOST OF COAL SALT ETC. BUT WITHOUT COST NO.

14 OF PIPE/GIPLATE Gl WIRE AS PER STANDARDSPECIFICATION. (20k solt+20k coal)

9926000015 ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK NO.

15 WOODBUSH,REFLECTORS FUSE, WIRING ETC. AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF

9926000016 STRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING ONECONDPER

16 FIXING OF INSULATORS BINDING JUMPERING ETC. KM

17 9926000017 STRINGING OF Gl WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. DO

9926000018 PROVIDING SINGLE PHASE SERVICE CONNECTION WITH- PVC 4MM TWIN CORECABLE FROM TERMINAL POLE NO.

18 TOMETERING POINT INCLUDING FIXING OFMETER WITH METER EARTHING COMPLETE WORK AS PER

STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

9926000019 PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITH PVC 4MM2/10MM2 FOUR CORE CABLE FROM NO.

TERMINAL POLE TO METERING POINT INCLUDING FIXING OF METER WITH METER EARTHING COMPLETE WORK

19 AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

9926000020 ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR ERECTION OF POLE/ GUY ETC. AS PER NO.

STANDARD SPECIFICATION OVER & ABOVE NORMAL COST COVERED AGAINST EXCAVATION OF PIT UNDER

20 NORMAL SOIL FOR ERECTION OF POLE,GUY, DOUBLE POLE STRUCTURE EARTHING WITH THE APPROVAL OF

SUPDT.ENGINEER.

21 9926000021 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR

9926000022 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR

9926000023 LT LINE TAPPING- SINGLE PHASE NO.

24 9926000024 LT LINE TAPPING- THREE PHASE NO.

25 9926000025 LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING,HT LINE CROSSING AND TELEPHONE LINE CROSSING NO.

9926000026 ERECTION OF SINGLE POLE STRUCTURESWITH, HG FUSES,TRANSFORMERS,LIGHTENING ARRESTOR, NO.

DISTRIBUTION BOX. ON 8 METERS 200 KG PSC POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,CONDUCTOR AND CABLE

26 WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

9926000027 ERECTION OF SINGLÉ POLE STRUCTURES WITH HG FUSES,TRANSFORMERS,LIGHTENING NO.

ARRESTOR, DISTRIBUTION BOX. ON 9 to 11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS AND REFILLING

OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING

27 ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS,CONDUCTOR AND CABLE

WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING

WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OFGUY SETS AND

9926000028 ERECTION OF PSC POLES OF IO METER 270 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, NO.

28 FIXING OF CROSS ARMS, TOP FIITING CLAMPS ANTICLIMBING DEVICES, INSULATORS ETC. COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

9926000029 ERECTION OF DOUBLE POLE STRUCTURE OF 10 METER 270 KG PSC POLES INCLUDING EXCAVATION OF PITS & NO.

REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES,CLAMPS, ANTI-CLIMBING

29 DEVICES DANGERBOARDS,INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARDSPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS ANDEARTHING. WITHOUT AB SWITCH

9926000030 STRINGING OF IOOMM2 ACSR/100MM2 AAAC CONDUCTOR FOR HT/ LT LINES INCLUDING FIXING OF ONE

30 INSULATORS, BINDING JUMPERING ETC. COND

9926000031 STRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING FIXING OF INSULATORS, BINDING ONE

31 JUMPERING ETC. COND

9926000032 ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH,HG FUSES, TRANSFORMERS, NO.

LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF 10 METERS 270 KG PSC POLES INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS,

32 SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTI-CLIMBING DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION

OF GUY SETS AND EARTHING.

33 9926000033 DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE &STACKING OF POLE SAFELY No.

ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

34 9926000034 DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE & STACKING OF POLE No.

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

9926000035 DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH TRANSFORMER) WITH CREDITING OF No.

35 FABRICATION & TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON ROADSIDE OR CREDITING TO

DEPARTMENTAL STORE

9926000036 DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT TRANSFORMER) WITH CREDITING OF No.

36 FABRICATION AT STORE & STACKING OFPOLE SAFELY ON ROAD SIDE ORCREDITING TO DEPARTMENTAL STORE

9926000037 STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FIITING OF ALL ACESSORIES I.E. SPECIAL KM

DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF

37 MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCE-

ING CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY ENGINEER

9926000038 STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM INCLUDING FITTING OF ALL ACESSARIES KM

I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR

38 FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED

PIERCE-ING CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

9926000039 STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL KM

39 DESIGNSUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLEPOINT,JUMPERS ETC. AS REQUIRED &DIRECTED BY ENGINEER IN CHARGE

9926000040 STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING OF ALL ACESSARIES I.E. SPECIAL KM

40 DESIGNSUSPENSION / TENSION CLAMP, FIXING OFCROSS ARM, BINDING TO PIN INSULATOR,PREPARING

SHACKLEPOINT,JUMPERS ETC. AS REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

9926000041 STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING FITTING OF ALL ACESSORIES I.E. KM

SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR

41 FIXING OF MESSENGER WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED

PIERCE-ING CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS REQUIRED & DIRECTED BY

ENGINEER IN CHARGE.

42 9926000042 DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD MATERIAL TO STORE Nos

9926000043 DISMENTALING TRANSFORMER CENTER ON IO MTR,270KG PSC POLE WITHOUT TRANSFORMER WITH Nos

43 CREDITING OF FABRICATION AT STORE AND STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

9926000044 DISMENTALING OF TRANSFORMERCENTER ON IOMTR,270KG PSC POLE(WITH TRANSFORMER) WITH Nos

44 CREDITING OF FABRICATION AT STORE AND STACKINGOF POLE SAFELY ON ROAD SIDE ORCREDITING TO

DEPARTMENTAL STORE

45 9926000045 DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING FITTINGOF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL STORE

46 9926000046 DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING FITTINGOF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL STORE

47 9926000047 DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING FITTING OF ALL ACESSARIES TO KM

DEPARTMENTAL STORE.

48 9926000048 DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES TO DEPARTMENTAL STORE.

49 9926000049 DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 1*35 SQ MM AND CREDITING FITTING OF ALL KM

ACESSARIES TO DEPARTMENTAL STORE.

9926000050 RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV & LT LINES INCLUDING ONE

50 FIXING OF INSULATORS, BINDING JUMPERING ETC. COND

9926000051 RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , BINDING JUMPERING ETC. ONE

52 9926000052 LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER WILL BE PROVIDED BY DGVCL NO.

53 9926000053 LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD METER SHOULD BE CREDITED TO SDN NO.

STORE. (METERWILL BE PROVIDED BY DGVCL

54 9926000054 LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER CONNECTION. (CT COILWILL BE PROVIDED BY PER

55 9926000055 LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER CONNECTION AND OLD CT SHOULD BE PER

CREDITED TO SDN STORE. (CT COIL WILL BE PROVIDED BY DGVCL CT

56 9926000056 LABOUR CHARGE FOR FIXING OF MMB FORDTR METER (MMB WILL BE PROVIDED BY DGVCL NO.

57 9926000057 LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL BEPROVIDED BY NO.

58 9926000058 PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE 3.5 METER (CABLETO BE PROVIDED BY NO.

9926000059 LABOUR CHARGE FORPROVIDING/RECONNECTION OF TERMINALCONNECTION WITH PROPER PER

SIZE OF LUGS. LUGS COST IS BORNE BY AGENCY TERMIN

9926000060 LABOUR CHARGE FOR THE SPOT READINGOF DTR METER WITH DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN PER

60 COPY BY SURVEYOR PERSON OF AGENCY IN PROFORMA REPORT SHOULD BE SUBMITTEDTO SDN ONLY IF DTR

ALLPARAMETER OF VOLTAGE, CURRENT & LOAD AS SHOWN IN PER-FORMA IS FILLED) AS PER THE

INSTRUCTION OF ENGINEER IN-CHARGE.

9926000061 LABOUR CHARGE FOR THE SPOT READINGOF DTR METER WITH DETAIL SURVEY OF DEFECT IF ANY. A DULY SIGN PER

61 COPY BY SURVEYOR PERSON OF AGENCY IN PROFORMA REPORT SHOULD BE SUBMITTED TO SDN OFFICE. DTR

(DULY FILL PER-FORMA IN FAULT CONDITION IN WHICH READINGPARAMETER IS NOT SHOWN IN METER

9926000062 INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING & FIXING OF 1.5SQ MM SINGLE STRAND 10 NO.

62 CORE ARMOURED COPPER CABLE (3.5METER), TERMINATION IN METER & COIL BOX,CT/PT COIL WILLBE

PROVIDED BY DGVCL

63 9926000063 INSTALLATION OF DTR METER INCLUDING METER BOX, TERMINATION IN METER & COIL ETC. (WITHOUT 10 NO.

CORE COPPERCABLE) (METER,METER BOX,CT/PT COILWILL BE PROVIDED BY DGVCL

64 9926000064 Binding of messanger Conductorat with a distance not more than 0.75 mtr with 6 turns minimum on XLPE Cable NO

with single strand binding wire (including cost of binding wire)

65 9926000086 Supply and Installation of 11/22 kV Distribution Transformers HT Terminal protector (UV Resistance) with using PER SET

95/120/150 sq.mm long barrel aluminum lug. (1Set = 3 Nos i.e. on R, Y, B)

9926000087 Supply & Installation of HT EPR Tap on 11/22 kV Distribution Transformer with replacement of bare conductor PER SET

66 by HT ABC conductor (DO bottom side to transformer) after removal of semi conductor by HT ABC (6 inch both

side). HT ABC to be supplied by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

9926000088 Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic) Type, NO

67 Earth Electrodes for HT Feeder Pole Having 2000 mm Electrode Length as per the Tender Specifications and

Drawing. (All Materials Will Be Supplied By Agency)

9926000089 Supply, Installation, Testing and Commissioning of Maintenance Free, Ready Capsule, Pipe-In-Cage (Pic) Type, NO

68 Earth Electrodes for HT Feeder Pole Having 3000 mm Electrode Length as per the Tender Specifications And

Drawing. (All Materials Will Be Supplied By Agency)

9926000090 Supply and Installation of 25 X 3 mm GI Strip having hot dip- galvanized-zinc coating of 80-100 microns without Meter

any joints or welding. Both the end of the GI strip should be connected with GI nut bolts and required

69 fabrication work for giving separate earthing connections to(1) Neutral of the transformer(2) MS structures of

the transformer center (Approximately 25 meter GI strip per transformer centre- as per requirement and

instruction of Engineer in- charge) (All Materials will be supplied by Agency)

9926000092 Supply and Installation of uPVC standard make Pipe of 1.25" diameter for covering GI strip with UV protected Meter

70 Cable Ties of 550 X 7.6 mm size to bind with pole face(Approximately 25 meter uPVC pipe for GI strip covering

per transformer centre -as per requirement and instruction of Engineer in-charge.

71 9926000093 Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to Transformer Meter

H.T. including Busbar (12 mm sleev) as per technical specification. (All Materials will be supplied by Agency)

72 9926000094 Supply & fixing of upto 33 kV Conducotr sleev for Busbar to Drop out Fuse and Drop out fuse to Transformer Meter

H.T. including Busbar(15 mm sleev) as per technical specification. (All Materials will be supplied by Agency)

9926000095 Supply & fixing of Disc type Red Color FRP(Non-flammable) material with Weather resistant, Non-conductive NO

73 bird guard OD=300 MM, ID=33 MM, Width =1.25 MM, one side cut from ID to OD. (All Materials will be

supplied by Agency)

74 9926000096 Providing and fixing of LT Terminal protectors i.e. Re-useable boot (LT Side 1.1 kV) including LT (1.1 kV) NO

insulating taps. All live part at LT side shall be covered with fixing of LT insulating taps.

75 Nylon Net around Transformer Center

75.1 9926000097 Nylon Net (12 * 15 ft) Per Net

9926000098 Nylon Dori Per tc

75.3 9926000099 Labour charge for fitting Nylon Net (All fabricated material for fitting nylon net shall be provided by DGVCL) Per tc

(B)Labour Charges for Maintenance Work

1 9924000001 Cutting of Tree branches surrounding HT/LT line per Tree

2 9924000002 Replacement of old jumpers & providing new double jumpers with 8" binding & capsuling with PVC pipe etc. No

3 9924000005 Support pole for stay PSC/STP/RSJ No.

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No.

5 9924000007 Pin binding of conductor 11/22kv Pin insulator per pole in coastal area with cleaninGg . No.

6 9924000008 Pin binding of conductor LT shackle insulator No.

7 9924000009 Replacement of one/bothinsulator at strain pole No.

8 9924000010 Replacement of LT shackle insulator at cut point No.

9 9924000011 Re-fixing of V cross Arm No.

10 9924000012 Re placement of V cross Arm No.

11 9924000013 Re-fixing of Top fitting in proper position No.

12 9924000014 Replacement of Top fitting No.

13 9924000015 Replacement of LT cross Arm No.

14 9924000016 Providing DO fuse on DP with carting& jumpering (ONE DO FUSE) No.

15 9924000017 Numberings of pole with paint by preparing back ground of one colour and No.

have lettering(height 3" * width0.5" using stencil

16 9924000018 Fixing of MMB(IPH.) at consumer end No.

17 9924000019 Fixing of MMB(3PH.) at consumer end No.

18 9924000020 Replacement of (Iph.) meter forUrban area No.

19 9924000021 Replacement of (Iph.) meter for Rural area No.

20 9924000022 painting consumer no. on MMB (Urban) (with letter size height40mm* width 8mm No.

21 9924000023 painting consumer no. on MMB (Rural) (with letter size height 40mm* width 8mm No.

22 9924000024 Replacement of deteriorated Single hase Service line No.

23 9924000025 Fixing of new dist. Box with complete wiring includin clamps, nut bolts etc. No.

24 9924000026 Repairing of guarding involving reshaping of bearer wire cross lacing binding etc. R Mtr.

25 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No.

26 9924000028 Painting of steel fabricated material of RSJ pole mounted transformer double pole structure with paint No.

27 9924000029 Painting of steel fabricated material of RSJ single pole with paint No.

28 9924000030 painting of steel fabricated material of PSC Single pole (HT line) with paint No.

29 9924000031 painting of steel fabricated material of PSC DO DP double pole with paint No.

30 9924000032 painting of steel fabricated material of PSC double pole at pole mounted transformer with paint No.

31 9924000033 Providing line separator single phase No.

32 9924000034 Providing line separator three phase No.

33 9924000035 Replacement / Providing of stay insulator along with adjustment No.

of tension in stay wire

34 9924000036 Replacement of deteriorated /providing LT dist. Box with new up to 100KVA capacity & crediting it to store. No.

35 9924000037 Replacement of deteriorated /providing LT dist. Box with new above 100KVA capacity & crediting it to store. No.

36 9924000038 Adjustment of tension in stay wire No.

37 9924000039 Refitting of LA No.

38 9924000040 Converting pin point to Shackle point including dismantling & restringing etc. location

39 9924000041 replacement of 11KV Pin insulator with providin new double in binding No.

40 9924000042 replacement of 22KV Pin insulator by new 11 kv pin insulator with spares & providin new double in binding No.

41 9924000043 Providing 11 kv double disc insulators with binding & restringing No.

42 9924000045 Replacement of existing conductor (all size) with new double in binding Cond/KM

43 9924000046 Plumbing of psc Pole with straightening at pin point No.

44 9924000047 Plumbing of psc Pole with straightening at tension point No.

45 9924000048 Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone Murrum etc. No.

46 9924000049 Providing new 11 kv AB [GO switch with fabrication and insulated colour code jumper binding lugs etc. Set

47 9924000051 Replacement of old 11 kv AB /GO switch with providing new insulated jumper, binding, lugs etc. Set

48 9924000052 Providing cage type loop guard in vertical LT line with using PVC reel insulators etc. per pole

49 9924000053 Labour charges for replacement /providing of MMB & service with all No.

accessories for three phase connection

50 9924000054 Labour charges for replacement /providing of MMB & service with all accessories for connection No.

51 9924000055 Dismantling of existing Dist. X'mer center (RSJ/STP POLE) 25/63/100/200 KVA No.

with all fabrication & crediting the old material to store.

52 9924000056 Disconnection from LT pole 1 phase No.

53 9924000057 Reconnection from LT pole 1 phase (payment after receipt of R/C charges) No.

54 9924000058 Disconnection from LT pole 3 phase No.

55 9924000059 Reconnection from LT pole 3 phase (payment after receipt of R/C chagr es No.

56 9924000060 Dismantling & removing of service line from pole & crediting to S/dn (1 phase) No.

57 9924000061 Dismantling & removing of service line from pole & crediting to S/dn (3h phase ) No.

58 9924000062 Reconnection of service line complete with PVC cable(1 ph) No.

59 9924000063 Reconnection of service line complete with PVC cable(3 ph) No.

Providing spiral type earthing by connecting earth terminal with earth terminal of meter box with G.I. SWG no

up to 1.5meters (total weight approximately 2.2kg-20 meter in length) with salt and coal 10kg each, including

60 9924000064 pvc rigid pipe 20mm dia (1.5mtr length) to cover exposed part of G.I. wire , providing and fixing of single core No.

1.5 sq mm single strand copper insulated cable with cable nail clip to be connected with connector to G.I. wire

at consumer end as per drawing DGVCL cons. earth. Earth resistance should be less than 2 ohms(All materials

supplied by contractor .

Providing and fixing of single core 1.5 sq mm single strand copper insulated cable with cable nail clip for spiral

type earthing at consumer end. The end of G.I. no 8 is to be connected by connector with copper cable of which

61 9924000070 other end shall be connected to the earth terminal of meter box. This item shall be used in location where per meter

there is more distance between earth terminal and earthing terminal of meter. All materials supplied by

(C) REPLACEMENT OF BARE CONDUCTOR BY HT / LT AERIAL BUNCH CONDUCTOR

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all acessaries i.e. special design

suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and

1 9924000065 inclusive of dismantling charge of existing bare conductor and crediting in to store & dismentaling of service KM

line from LT bare conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer in Charge.

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including fitting of all acessaries i.e. special

design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and

2 9924000066 inclusive of dismantling charge of existing bare conductor and crediting in to store & dismentaling of service KM

line from LT bare conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all acessaries i.e. special design

3 9924000067 suspension / tension clamp, fixing of cross arm, binding to pin insulator,preparing shackle point,jumpers etc. KM

and inclusive of dismantling charge of existing bare conductor and crediting in to store complete as required &

directed by Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all acessaries i.e. special design

4 99240000658 suspension / tension clamp, fixing of cross arm, binding to pin insulator,preparing shackle point,jumpers etc. KM

and inclusive of dismantling charge of existing bare conductor and crediting in to store complete as required &

directed by Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including fitting of all acessaries i.e. special

design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc. for fixing of messenger wire and

5 9924000069 inclusive of dismantling charge of existing bare conductor and crediting in to store & dismentaling of service KM

line from LT bare conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer in Charge.

( D )LAYING OF 11 KV MVCC

1 LAYING. TESTING & COMMISSIONING OF SPECIALLY DESIGNED 11 KV AL -59 ACS MEDIUM VOLTAGE COVERED CKM

CONDUCTOR AS PER THE TECHNICAL SPECIFICATIONS ( WITH ACCESSORIES )

2 LAYING,TESTING & COMMISSIONING OF SPECIALLY DESIGED 11KV 55 MM2 AAAC MEDIUM VOLTAGE COVERED CKM

CONDUCTOR AS PER THE TECHNICAL SPECIFICATIONS ( WITH ACCESSORIES)

(D)LABOUR RATE FOR UNDERGROUND CABLE WORK FOR FY 2024-25 (WITHOUT GST)

Sr. No. Item Code No. Description Unit Rate

Labour charge for excavation of cable trench of 400mm width x 1200mm depth, in any type of soil for laying of

1 9925000001 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

length is to be considered

Labour charge for excavation of cable trench of 600mm width x 1200mm depth, in any type of soil for laying of

2 9925000002 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

length is to be considered

Labour charge for excavation of cable trench of 400mm width x 1500mm depth, in any type of soil for laying of

3 9925000003 cable of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench Meter

leng th is to be considered

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 & preparation of sand layer 100mm

thick, in the cable trench & covering the cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter long RCC

4 9925000004 half round muffs and providing and fixing of 4inch width yellow colour polyethylene tape with Meter

printing"CAUTION ELECTRIC CABLE BELOW' at 0.75 m depth from ground surface after laying cable in trench.

This will provide indication that electric cable is passing underground so as to protect cable from mechanical

injuries, refilling the same, as per Instruction of E gineer in Charge (EIC) .

Labour charge for horizontal drilling using Auger machine without damage to surface road at max 2.0 mtrs

depth & putting of 6.11 kg/cm2 , class-4,Green color, 110mm 0.D. 8.5mm thickness H.D.P.E. pipe confirms to IS

4984-1987(3rd revision) and BIS certification and laying of 11KV/22KV XLPE cable of size up to 240 mm2 in

5 9925000005 HDPE pipe, as per Site Condition (excluding cost of pipe). The detail map obtained from HDD machine and excel Meter

sheet hard and soft copy) indicating the respective depth and distance from adjacent landmark for each

segment for HDD is must require to be submitted. HDD to be carried out at depth 1.5 mtrs to 2.0 mtrs as per

site conditions and as er instruction of EIC.

Labour charge for horizontal drilling manually without damage to surface road at max 2.0 mtrs depth & putting

of 6.11 kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness H.D.P.E. pipe confirms to IS 4984-1987(3rd

revision) and BIS certification and laying of 11KV/22KV XLPE cable of size up to 240 mm2 size, as per Site

6 9925000006 Condition (excluding cost of pipe). The detail map and excel sheet (hard and soft copy) indicating the respective Meter

depth and distance from adjacent landmark for each segment of cable to be submitted. Drilling to be carried

out at depth Minimum 1.2 mtrs to 2.0 mtrs as per site conditions as per instruction of EIC.

7 9925000007 Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. , 8.5 mm thickness H.D.P.E. pipe confirms to IS 4984 Meter

and BIS certification for laying of underground 11KV/ 22KV XLPE cable up to 240 mm 2 size.

8 9925000008 Labour work for RCC concreting on disputed location and repairing of damage portion of road crossing for the CMT

work carried out for roads crossing as well as concreting & muffing of poles including all materials

Providing & fixing concrete stone route marker of 300 mm width x 150 mm thick x 650 mm height embedded in

earth at least 300 mm below & 350 mm above ground level respectively at distance approx. 50 meters along

the length of cable. The RCC concreting (1:2:4)(all necessary materials will be in bidder's scope) of route

9 9925000009 marker is to be carried out 300 mm width x 150 mm thick x 300 mm below ground level as per instruction of No

EIC. The route marker should be with name of company with approved yellow colour-DGVCL. The distance from

marker to cable and cable depth with feeder name etc., marked with arrow sign is to be painted on it. The

route marker is to be fixed at location near to any fixed permanent location (not necessary to fix exact on top of

cable) as per instruction of EIC.

Erection of D.P. (double pole) structure using 9 / 11 Mtr. RSJ pole with cable connection arrangement along

10 9925000010 with fitting of necessary fabrication for 11KV cable including excavation of pit & refilling of earth as per No

instruction of EIC. (Exclusive of concreting & muffing of poles)

Erection of Single pole structure using 9 / 11 Mtr RSJ pole with cable connection arrangement along with fitting

11 9925000011 of necessary fabrication for 11KV/22 KV cable including excavation of pit & refilling of earth as per instruction No

of EIC. (Exclusive of concreting & muffing of poles

Erection of D.P. (double pole) structure using 8.0 Mtr. PSC pole with cable connection arrangement along with

12 9925000012 fitting of necessary fabrication for 11KV cable including excavation of pit & refilling of earth as per instruction of No

EIC. (Exclusive of concreting & muffing of poles

Erection of Single pole structure using 8.0 Mtr PSC pole with cable connection arrangement along with fitting of

13 9925000013 necessary fabrication for 11KV/22 KV cable including excavation of pit & refilling of earth as per instruction of No.

EIC. (Exclusive of concreting& muffing of poles

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up to 240 mm 2 on DP Structure with fixing of

14 9925000014 Nos polymer cleats on top and middle part. Polymer cleats, nut bolts etc. fixing material to be provided by perJob

Providing & fixing of 6.11kg/cm2 , class4,Green color, 110mm O.D. 8.5mm thickness H.D.P.E. pipe confirms to IS

4984 and BIS certification on the erected DP structure for the mechanical protection of cable by inserting the

15 9925000015 cable inside HDPE pipe. The HDPE pipe shall be erected in such a way that 300mm shall be below the ground perJob

level and the rest 2700 mm shall be supported on the DP Structure with 01 No Polymer cleat. All materials

including polymer cleat and Nut bolt to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B GI pipe with pit to be filled with salt & coke

16 9925000016 and construction of chamber as per DGVCL Drg. No. dg /100 for DP and cable. The earthing pit should be joined No

with cable by G.I. strip of size 1" width & 2 mm thick. All material GI pipe, Coke Salt etc will be supplied by

17 9925000017 Supply & fixing of heat shrink type end terminations (outdoor) for up to 11kV 3C x 185 mm2 size XLPE cable as No

per DGVCL technical s ecification

18 9925000018 Supply & fixing of heat & shrinkable end terminations (outdoor) for up to 22 kV 3C x 185 mm 2 size XLPE cable No

( as per DGVCL technical specification)

19 9925000019 Supply & fixing of heat shrinkable type end terminations (indoor) for up to 11kV 3C x 185 mm 2 size XLPE cable No

as per DGVCL technical specification

20 9925000020 Supply & fixing of heat & shrinkable end terminations (indoor) for up to 22 kV 3C x 185 mm 2 size XLPE cable as No

per DGVCL technical specification

21 9925000021 Supply & fixing of heat shrinkable straight through joint for up to 11kV 3C x 185 mm 2 size XLPE cables as per No

DGVCL technical specification.

22 9925000022 Supply & fixing of heat shrinkable straight through joint type for up to 22kV 3C x 185 mm 2 size XLPE cable as No

per DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep joint pits for installation of

23 9925000023 11kV / 22kV Straight through joints as per instruction of engineer-in-charge & covering the cable with 150 mm No

dia (Outer), thickness 25 mm, 1.0 meter long RCC half round muffs & refilling same as per instruction of EIC .

Providing and fixing of insulating bus bar, made from 11KV/22KV XLPE cable after removal of semi conducting

layer and applying of PVC heat shrinkable antitracking core insulating tubing (1.1KV), on both end terminal

24 9925000024 using Aluminium long barrel heavy duty up to 240 sq mm lugs, Aluminium bus connector. Taping with PGclamp No

for bus conductor as per drawing and as per instruction of EIC. The Allurninium lugs and PG clamp shall be

covered with 11KV/22KV HT insulating tapes.(11KV/22KV XLPE cable will be in scope of DGVCL while all other

materials will be in bidder's scope.

25 9925000025 Testing of cable at various points and commissioning the feeder as per instruction of engineer-in-charge.Test No

result shall be submitted by contractor with bill.

26 9925000026 Preparation and submission of 6 (six) copies, of complete layout drawings with GIS mapping as per actual cable Set

routing showing road crossing, HDPE pipe sleeving, jointing locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of 2 mm aluminium sheet size 750x300 mm (2.5 x

1 ft) rectangle, as per design, pretreated with phosphate process and acid etching coated with one coat of

epoxy primer and two coats of best quality paints, reflectorized with Hi Intensity retro — reflective sheeting as

27 9925000027 per the latest and frame fabricated from suitable size iron angle. The Sign Board is to be fixed on the base No

prepared from channel and bracing angles which is grouted by means of cement concreting of 1:2:4 for size of

300 mm dia x 800 mm height (500 mm to be grouted in ground). The details to be displayed on sign board will

be given by InchargeEngineer. (a) Hi intensity Micro prismatic Grade

Providing and fixing of Sign Board (Danger Board) on Distribution Transformer Centers Made out of 2mm

aluminium sheet size 300x300mm (1X1 ft) as per design, pre treated with phosphate process and acid etching

28 9925000028 coated with one coat of epoxy primer and two coats of best quality paints, reflectorized with Hi-Intensity No

retroreflective sheeting as per the latest and frame fabricated from suitable size iron angle. The Sign Board

(Danger Board is to be fixed at the location as per instruction of In-charge Engineer. (a) Hi intensity Micro

prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm (W) from 3 mm aluminium sheet along with

29 9925000029 mm dia aluminium binding wire for fixing of aluminium tag near end termination joint at DP structure for No

identifying the cable. The details of feeder i.e. 11 / 22 KV with feeder name should be punched on the tag by

letter punch of size 16 mm as per instruction of In-charge Engineer.

30 9925000030 Supply & fixing of heat shrink type end terminations (outdoor) for 11kV 3C x 240 mm2 size XLPE cable as per Nos

DGVCL technical specification.

31 9925000031 Supply & fixing of heat & shrinkable end terminations (outdoor) for 22 kV 3C x 240 mm2 size XLPE cable as per Nos

DGVCL technical specification

32 9925000032 Supply & fixing of heat shrink type end terminations (indoor) for 11kV 3C x 240 mm2 size XLPE cable as per Nos

DGVCL technical specification

33 9925000033 Supply & fixing of heat & shrinkable end terminations (indoor) for 22 kV 3C x 240 mm2 size XLPE cable as per Nos

DGVCL technical specification

34 9925000034 Supply & fixing of heat shrinkable straight through joint for 11kV 3C x 240 mm2 size XLPE cables as per DGVCL Nos

technical s ecification.

35 9925000035 Supply & fixing of heat shrinkable straight through joint type for 22kV 3C x 240 mm2 size XLPE cable as per Nos

DGVCL technical s ecification

Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible, RRL type3 Way RMU including Two

36 9925000038 numbers of earthings as per Drawing (material is in bidder's scope) and as per DGVCL Technical specification. Nos

Installation, Testing and commissioning of 11 KV,630 A SCADA Compatible, RRLL type4 Way RMU including Two

37 9925000039 numbers of earthings as per Drawing (material is in bidder's scope) and as per DGVCL Technical specification. Nos

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible, RRL type-3 Way, RMU including Two

38 9925000040 numbers of earthings as per Drawing (material is in bidder's scope) and as per DGVCL Technical specification. Nos

Installation, Testing and commissioning of 22KV,630 A SCADA Compatible, RRLL type-4 Way, RMU including

39 9925000041 Two numbers of earthings as per Drawing (material is in bidder's scope) and as per DGVCL Technical Nos

Construction of plinth for 11KV, RRL type- 3 Way( i.e Two numbers of Isolator & One number of Breaker) Ring

40 9925000042 Main Unit as per DGVCL's technical specification mentioned in drawing no: Drg. 11kv-01. All required material Nos

will be supplied by contractor.

Construction of plinth for 11KV, RRLL type4 Way (i.e Two numbers of Isolator & Two number of Breaker)Ring

41 9925000043 Main Unit as per DGVCL's technical specification mentioned in drawing no:Drg. 11kv-02.AlI required material Nos

will be supplied by contractor.

Construction of plinth for 22KV, RRL type- 3 Way (i.e Two numbers of Isolator & One number of Breaker) Ring

42 9925000044 Main Unit as per DGVCL's technical specification mentioned in drawing no: Drg. 22kv-01. All required material Nos

will be supplied by contractor.

Construction of plinth for 22KV, RRLL type4 Way (i.e Two numbers of Isolator & Two number of Breaker)Ring

43 9925000045 Main Unit as per DGVCL's technical specification mentioned in drawing no:Drg. 22kv-02.All required material Nos

will be supplied by contractor.

Modifications e.g. Providing and fixing ofTerminal protectors i.e. Re-use able boot (HT Side 11/22KV, LT Side

1.1KV) including 11/22 KV insulating taps and L.T.(I.I KV) insulating taps ,Busbar, Tapping from Bus Bar (11/22

KV XLPE cable) through P.G. Clamp for H.T. Jumper to D.O. Fuse to bushings of Transformer Center, providing &

Fixing of jumper and providing & fixing of Heat Shrinkable Anti Tracking CoreInsulating Tubing (Insulation Level

44 9925000046 11/22 KV) in H.T. jumper , Clamping arrangement of cable support frame on both side of existing Over Head Nos.

type Distribution Transformer to utilize in Under Ground cable network as per drawing & as per instruction of

Engineer incharge. All live parts i.e. PGClamp, connections of D.O.fuses, HT bushings etc . shall be covered with

fixing of 11/22 KV HT insulating tapes. ( 11/22 KV XLPE cable will be in scope of DGVCL while all other materials

will be in bidder's scope )

45 9925000047 Laying of any size of 11/ 22 KV XLPE /PILCCable in readymade trench or in open space

46 9925000060 Labour charges for lying of O/H XLPE cable pole to pole KM

47 9925000064 Supply of 150 mm dia (Inner), thickness 25 mm, 1.0 meter long RCC half round pipe NO

TOTAL ESTIMATE-TWENTY NINE LAKH ONLY

Note :- All Rates are Excluding of GST.

Executive Engineer (O&M),

D.G.V.C.L.,Vapi Rural Division.

1. DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ Poles,Insulators,Fabricated

materials etc. to the contractor.2.All fabricated items shall be fabricated as per DGVCL approved drawing and

by welding rods confirming to the relevent ISI specification and as directed by Engineer in charge.3.Necessary

electricity connection for fabrictated items shall be provided by DGVCL on payment of required charge for

connection & electricity bill of the same shall be paid by the agency.4.All the rates are inclusive of PF and

Exclusive of GST applicable time to time.5.All steel material are to be painted as below:(a) Scrubbing of rusted

surface properly before applying the paints on to the RSJ poles & steel fabricated materials of RSJ/PSC poles is

must required.(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ poles

& steel fabricated materials of RSJ/PSC poles. (c) Two coats of approved ISI mark silver paint (i.e. triple mangoes

or equivalent quality silver paint) is to be properly painted on to the RSJ poles & steel fabricated materials of